某飞行器推力矢量试验测力装置研制

为满足某飞行器推力矢量试验的测试要求,采用两台六分量应变天平和一个空气桥组成测力装置来实现飞机全机气动力和喷管推进特性同时分别测量。基于有限元软件,对天平的应变及空气桥对天平的干扰进行了分析。结果表明:空气桥对天平力分量的干扰值优于5%,对力矩(滚转力矩除外)分量的干扰值优于15%,达到了设计指标。通过校准获得了单独天平、天平带空气桥(充压、不充压)状态下的校准公式,校准结果表明:两台天平各分量的综合加载误差均优于0.3%,天平带空气桥(充压、不充压)状态下各分量的综合加载误差优于0.5%,空气桥对天平的干扰量值与有限元分析结果一致。理论分析与实测结果证明:研制的天平及空气桥达到了预定目标,它的测量精准度高,满足推力矢量风洞试验需求。     

表贴式永磁同步电机直接转矩控制变幅值预测控制研究

基于以电压矢量幅值为变量的表贴式永磁同步电机(SPMSM)磁链和转矩方程,采用预测控制计算得出施加不同电压矢量幅值的下一时刻磁链和转矩值,选择使磁链和转矩误差目标函数最小的电压矢量幅值作为最优值,从而确定下一时刻施加的电压矢量。仿真结果表明:在电压矢量变幅值预测下,SPMSM直接转矩控制(DTC)系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形正弦。预测控制需要从备选电压矢量幅值集合中选择最优幅值。理论上,备选电压矢量幅值个数越多,系统优化效果越好,但也带来更大的计算负担。研究了9种等分电压矢量情况下变幅值预测控制系统的控制效果。根据控制效果和计算负担,提出变幅值预测控制将电压矢量幅值三等分较为理想。     

基于双变量预测控制的表贴式永磁同步电机直接转矩控制系统

基于电压矢量幅值和相角为变量的表贴式永磁同步电机(SPMSM)定子磁链幅值和转矩表达式,给出了9个不同幅值和相角的备选电压矢量,采用预测控制计算得出施加不同电压矢量下一时刻的定子磁链幅值和转矩值,建立了基于磁链和转矩误差的目标函数,并选择使目标函数最小的电压矢量为作为下一时刻施加的最优电压矢量。仿真结果表明:在双变量预测控制下,SPMSM直接转矩控制系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形正弦。进一步对比分析表明:与开关表和固定电压矢量选择策略相比,双变量预测控制能显著减小转矩和磁链脉动。与开关表相比,转矩脉动均方根误差降低了62.92%,磁链脉动均方根误差降低了45.05%,评价函数均值降低了60.30%；与固定电压矢量选择策略相比,转矩脉动均方根误差降低了22.40%,磁链脉动均方根误差降低了3.85%,评价函数均值降低了15.93%。     

A boundary vector cell model of place field repetition

Hippocampal place cells are thought to form the neural substrate of a global cognitive map. However, in multicompartment mazes, these cells exhibit locally repeating representations, undermining the global cognitive map view of place cells. This phenomenon appears to be related to the repetitive layout of these mazes, but still no hypothesis adequately explains it. Here, we use a boundary vector cell (BVC) model of place cell firing to model the activity of place cells in numerous multicompartment environments. The activity of modeled place cells bears a striking resemblance to experimental data, replicating virtually every major experimental result. Our results support the BVC model and indicate that locally repeating place cell firing could result purely from local geometry.     

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.     

气动力与推力矢量控制近距击顶弹道研究

针对某型反坦克导弹从顶部攻击近距离目标存在的空气动力控制不足的问题,探讨了在导弹初始飞行段采用推力矢量控制的可行性,并对有推力矢量控制的近距击顶飞行弹道进行了分析研究,最,通过计算机数字仿真,进行了弹道飞行仿真计算。结果表明,所提方法改善了导弹飞行弹道特性,提出了导弹机动性能和对近距离目标攻击的效果,并有利于减少最小射程。     

无刷直流电动机旋转感应电压的分析与计算

系统地推导了无刷直流电动机旋转感应电压的通用计算公式,并以这些公式为基础,详细研究了气隙磁密平顶宽度、分布绕组、短距、分数槽、斜槽等因素对旋转感应电压的影响,给出了在保证旋转感应电压是平顶宽度为理想值的梯形波时,转子磁钢和定子绕组设计时应考虑的因素.本文的研究内容为高性能低转矩波动无刷直流电动机的设计提供了理论基础.      

螺旋桨向量平衡

螺旋桨旋转时各桨叶的离心力可分解为在桨叶轴线旋转平面内的静不平衡力和垂直于此旋转平面的动不平衡力偶。由于各桨叶不完全相同,这两种不平衡度在不同矩角位置会有差异。但所加静平衡力和动平衡力偶则不随变矩而变化,它们的平衡作用在所有矩角位置都是一样的,可以采用本文所述的向量分析方法,在特制的向量平衡图上预测对各矩角平衡的结果。这样就可以只需一次平衡即使各矩角都平衡合格并达到最佳平衡状态,而用常规平衡方法需要反复凑试甚至无法合格。     

矢通量分裂隐式有限体积法解超音速喷流强干扰流场

发展了用于轴对称流场,任意非正交曲线网格下的矢通量分裂隐式有限体积法;统一了二维和轴对称流场计算的表达式。该方法对粘性通量项进行了分解和归类,考虑了包括交叉导数项在内的所有项对隐式增量的贡献。对带中心喷流的流动计算表明该方法收敛速度和计算精度均优于ＭａｃＣｏｒｍａｃｋ显式格式。横向喷流强干扰流场的计算初步揭示了姿控发动机喷流产生间接推力的机理,由此,设计中可降低对主发动机额定推力的要求     

雷达和红外成像双传感器信息融合目标识别研究

提出了一种利用目标的雷达和红外成像２种独立的传感器信息的互补性来构造特征向量的信息融合方法——联合向量空间法,并用对应的自适应信息融合系统进行目标识别。仿真证实比用单传感器的效果明显优越,从而说明了本文方法的有效性。