三阶段法与活动周期图

对二种离散系统仿真建模方法，三阶段法和活动周期图进行系统的介绍，分析与讨论，指出它们的特点，应用情况及最新发展，三阶段法是分析研究仿真问题的一种世界观，具体反映在仿真软件及模型的程序结构，活动周期图往往与三阶段法一道使用，用于描述系统内实体的逻辑流程，这两种方法的特点使它们成为欧洲，尤其是英国最重要的离散系统仿真建模方法。     

SFS的变分方法研究与实现

变分法是解SFS问题的经典方法,其关键是在合适的约束模型下构造相应的泛函,然后通过变分法寻求泛函极小化问题的解。本文提出了一种新的综合约束模型,并基于此约束模型构建了泛函,然后泰勒展开变分处理后的等效欧拉方程,再应用有限差分方法将偏微分方程离散化,最后进行迭代计算得到了曲面各点的高度值。Matlab的编程实现表明该算法有效可行。     

飞机设计的“原准法”与“综合法”

本文分析了飞机设计中的继承与发展、型号的渐变与突变等问题,从而论证“原准法”主要用于已有型号的改进、改型与系列化发展,超越这种用途的应用如仿制等,有历史条件的局限性。本文论证了正确的飞机设计方法应为“综合法”,以满足需要、博采众长、创新开拓、优化匹配为原则.     

基于Lyapunov方法的空间飞行器大角度姿态机动控制

本文研究空间飞行器大角度资态机动的控制问题，为了克服大角度机动时使用欧拉角可能产生的奇异问题，文中使用四元参形式的微分方程来描述飞行器的运动，飞行器的动力学方程具有不确定性和非线性。本文应用Lyapunov方法设计在大角度姿态机动控制器，这个控制器具有按指数规律变化的增益，它大大减小了对初始力矩的要求，最后，本文给出一个例子来说明所导出的控制器的优点。     

卫星远距离伴飞的变结构控制

主要研究卫星远距离稳态伴飞的控制问题。首先,根据线性相对运动方程(C-W方程)设计了能实现稳态伴飞的变结构控制律,并证明了其在有干扰情况下的有效性。然后,推导了适用于远距离相对运动的非线性方程解析解,并在此基础上对伴飞控制律进行了改进,以实现远距离的稳态伴飞。通过仿真,比较了上述控制律的效果,证明了基于非线性相对运动的变结构控制能有效地实现远距离稳态伴飞。     

Bayesian approach to retrieval of vertical ozone profile from radiometry data

A technique for retrieving vertical distributions (profiles) of atmospheric gas constituents from data of passive remote sensing of the atmosphere is proposed. The goal of the technique based on the statistical (Bayesian) approach to solution of inverse problems is construction of probability distribution for a sought quantity throughout the interval of the studied heights. It is assumed that initial data contain measurement noise, and a priori information about properties of the profile is used. It is proposed to approximate the sought profile by a function in the form of an artificial neural network. This approximation allows optimal inclusion of a priori information into retrieval procedure, thus ensuring the most effective regularization of the problem. Efficiency of the proposed technique is demonstrated on an example of retrieval of vertical ozone profile from data of ground-based sounding of the atmosphere in the millimeter wavelength range. Results of profile retrieval from model data and from spectra of radiation temperature of the atmosphere measured in the Apatity (67° N, 33° E) in the winter of 2002–2003 are presented.     

燃气源控制气流热效应数值模拟研究

为了解迷宫形导热套环与流体之间的热交换对控制气流温度及压力的影响,采用整体求解法求解控制气流与多层套环之间的耦合传热问题。为确保计算结果在物理上的真实性,采用“假密度法”求解以温度T为求解变量的能量方程。计算得到了控制气流参量随时间的变化情况以及迷宫形多层导热套环的温度在不同时间点的分布情况,结果表明流场的三维复杂结构使得每个小孔射流与各层套环的传热情况都不同,流体与固体区域之间的换热量随时间变化,其中内套环和中套环对流体的吸热量随时间的增长而急速下降,从而导致控制气体的温度和压力都随时间而逐渐增大。计算所得的控制气流温度和压力与试验测量值的变化趋势相同,验证了计算方法的有效性。     

民用飞机复合材料C型框分析方法研究

以层压板理论为基础,提出一种复合材料C型框结构的工程分析方法,并通过试验给出了C型框结构设计许用值。通过工程分析结果与试验结果的对比,说明此工程分析方法可用于指导C型框结构设计。     

Prediction of horizontal gas–solid flows under different gravitational fields

In this paper the performance of horizontal pneumatic conveying under different gravity environments is evaluated. An Euler–Lagrange approach validated versus ground experiments is employed to predict the relevant particle variables such as particle mass flux, mean conveying and fluctuating velocities in terrestrial, lunar and micro-gravity conditions. Gravity reduced computations predict a reduction in the global particle–wall collision frequency. Also, in the case of low wall roughness and small particle mass loading, reduction of gravity acceleration implies an increase of particle–wall collision frequency with the upper wall of the channel affecting greatly the particle mass flux profile. In the case of high wall roughness and/or high particle-to-fluid mass loading (i.e., around 1.0) particle conveying characteristics are similar in the three gravity conditions evaluated. This is due to the fact that both, wall roughness and inter-particle collisions reduce gravitational settling. However, the influence of gravity on the additional pressure loss along the channel due to the conveying of the particles is much reduced.     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.