基于流场/声场混合模型的叶轮机械单音噪声研究

基于叶轮机械三维非定常黏性数值模拟(URANS)与管道内叶片排气动噪声声类比理论(DBAA),成功地发展了叶轮机械单音噪声混合预测模型(URANS/DBAA),该模型能够实现叶轮机械叶片详细设计参数与噪声辐射强度的关联。由于采用了Lighthill声类比理论,使得该模型并不需要耗费大量计算资源。基于URANS/DBAA混合模型,对某单级轴流风扇的单音噪声及其噪声源分布特性进行了详细的计算分析,结果表明,该混合模型能够准确模拟叶轮机械单音噪声,实现了对叶轮机械单音噪声基本规律的分析和认识。     

基于可靠性优化的芯片自愈型硬件细胞阵列布局方法

以提高可靠性为目标,研究芯片自愈型硬件细胞阵列布局的新结构和新方法。针对传统可靠性模型无法体现细胞内部模块随布局结构动态变化的不足,通过细胞单元电路资源消耗分析,面向二维阵列结构进行了新的可靠性建模。根据新模型,在分析布局结构参数对可靠性影响程度的基础上,提出了一种先分块再分层的细胞布局新结构。用实例验证了新布局结构对可靠性提高的有效性,给出了不同设计任务和细胞电路设计方法情况下确定最佳布局方式的计算方法,并总结出了新布局结构中分块、分层参数选择规律,最终论证了最佳布局方式计算方法和参数选择规律的一般适用性。     

Numerical investigation of windage heating within shrouded rotor-stator cavity system with central inflow

The rotating disk surface temperature rise due to windage heating effect by numerically modeling the turbulent flow within a rotor-stator cavity which is available with a peripheral shroud and imposed through airflow was dealt with. The windage heating may be defined as viscous friction heating caused by relative velocity differences across the boundary layers between the fluid and the rotating disk surface. The kinetic energy dissipation process could transform the rotating shaft power into thermal heating. Commercial finite volume based solver, ANSYS/CFX was employed to numerically simulate this physical process by using the shear stress transport (SST) turbulence model. CFD results include the rotating disk surface temperature axial distribution and tangential velocity distribution of the fluid domain. The velocity difference between the result obtained by particle image velocimetry (PIV) experiments and CFD simulation are within 5%. The adiabatic disk temperature rise can be calculated by the tangential velocity of disk and fluid in large gap ratio and turbulent parameter. CFD temperature distribution results and those estimated via velocity differences are within 10%.     

A fuzzy PID-controlled SMA actuator for a two-DOF joint

Shape memory alloy(SMA) actuator is a potential advanced component for servosystems of aerospace vehicles and aircraft. This paper presents a joint with two degrees of freedom(DOF) and a mobility range close to ±60 when driven by SMA triple wires. The fuzzy proportional-integral-derivative(PID)-controlled actuator drive was designed using antagonistic SMA triple wires, and the resistance feedback signal made a closed loop. Experiments showed that, with the driving responding frequency increasing, the overstress became harder to be avoided at the position under the maximum friction force. Furthermore, the hysteresis gap between the heating and cooling paths of the strain-to-resistance curve expanded under this condition. A fuzzy logic control was considered as a solution, and the curves of the wires were then modeled by fitting polynomials so that the measured resistance was used directly to determine the control signal. Accurate control was demonstrated through the step response, and the experimental results showed that under the fuzzy PID-control program, the mean absolute error(MAE) of the rotation angle was about 3.147. In addition, the investigation of the external interference to the system proved the controllable maximum output.     

A numerical model for bird strike on sidewall structure of an aircraft nose

In order to examine the potential of using the coupled smooth particles hydrodynamic(SPH) and finite element(FE) method to predict the dynamic responses of aircraft structures in bird strike events, bird-strike tests on the sidewall structure of an aircraft nose are carried out and numerically simulated. The bird is modeled with SPH and described by the Murnaghan equation of state, while the structure is modeled with finite elements. A coupled SPH–FE method is developed to simulate the bird-strike tests and a numerical model is established using a commercial software PAM-CRASH. The bird model shows no signs of instability and correctly modeled the break-up of the bird into particles. Finally the dynamic response such as strains in the skin is simulated and compared with test results, and the simulated deformation and fracture process of the sidewall structure is compared with images recorded by a high speed camera. Good agreement between the simulation results and test data indicates that the coupled SPH–FE method can provide a very powerful tool in predicting the dynamic responses of aircraft structures in events of bird strike.     

叶栅安装角异常的非定常流场数值模拟

采用商用软件NUMECA对叶栅安装角异常进行二维流场定常和非定常数值模拟,并进行对比分析,得到了因叶栅安装角异常造成通道堵塞对该叶片以及相邻叶栅通道流场结构和非定常气动力的影响.结果表明:安装角异常角度大于0°时,主要对沿吸力面方向叶栅通道流场结构影响较大,随着安装角异常角度的增大,气流不断恶化,出现大面积的附面层分离,尾涡脱落主频率随着安装角异常角度的增大而减小,次频率随着安装角异常角度的增大而增大;并导致叶片非定常气动力相对脉动量迅速增大,这可能是导致叶片疲劳破坏的原因之一.     

航空发动机高压转子的结构动力学设计方法

建立了航空发动机高压转子的动力学模型,该模型包含所有的结构动力学设计参数,揭示了设计参数与转子振动特性间的关系,提出了转子临界转速界值的估计方法,并予以理论证明.建立了分别基于两阶临界响应的支承刚度设计准则.发现了转子参数临界转速现象,在参数临界转速处,阻尼器将失去阻尼作用,振动趋于无穷大;给出了参数临界转速出现的条件,上述的结论对于航空发动机高压转子的设计具有重要的指导意义.     

防热试验用高温超声速燃气流场热环境分析

对用于防热系统试验考核的高温超声速燃气流场的流场结构和热环境特性进行了计算和分析.将CFD模拟方法与工程计算方法相结合,对两类锥形喷管形成的燃气流场进行了数值模拟计算和流场结构分析,并与试验过程中高速拍摄的图片进行了比对.利用模拟得到的流场气动参数,计算了沿流场轴向位置球头驻点模型的热流和压力,并与试验测量数据进行了对比,结果吻合较好.锥形喷管形成压缩波和膨胀波交替的流场结构,导致流场气动参数与模型热流和压力形成正弦变化的特点.     

铝锂合金贮箱焊接技术研究现状

铝锂合金是制造航天运载器贮箱的理想材料,其连接技术也是航天领域所关注的问题.本文综述了典型新一代铝锂合金材料2195及1460铝锂合金的主要焊接方法及其发展现状.与传统钨极氩弧焊、真空电子束焊、变极性等离子弧焊等熔化焊方法相比,新型固相连接技术搅拌摩擦焊由于能够获得更为优质的接头性能,有望在铝锂合金贮箱结构的连接上获得广泛应用.     

仪表着陆系统设备混合监控网络构建

针对传统仪表着陆系统设备"点-点"遥控监控方式易中断,影响运行安全这一问题,提出了一种基于光纤与线缆的"多点-环网"混合监控方案。光纤与线缆互为补充,互为备份,并且当某路监控链路故障时,可自动选择其它监控路径,有效提高仪表着陆系统设备监控效率,增加监控冗余度,为我国民用机场导航监控提供一种新思路。该方案已经成功在重庆江北机场运行。