基于互锁双指令控制的电磁阀驱动电路设计

为满足体积及重量强约束条件下的动力系统电磁阀控制需求，提出了一种基于互锁双指令控制的电磁阀驱动电路设计方案。采用逻辑相反的互锁指令与串并联设计的阀门驱动电路结构形式，设计了基于McBSP内总线交互的电磁阀控制流程，建立了150N电磁阀驱动电路仿真模型及阀门电流测试平台。仿真及测试结果表明，该驱动电路能够有效实现二度故障下的电磁阀开启与关闭。     

A novel architecture of electro-hydrostatic actuator with digital distribution

To address the flow imbalance rapidly of the asymmetric Electro-Hydrostatic Actuator (EHA), this paper presents a novel architecture of asymmetric EHA with the Digital Distribution (EHA-DD). It also improves the flow nonlinearity and control accuracy of the pump, especially in the low-speed condition. The digital distribution with two High-Speed on–off Valves (HSVs) not only balances flow instead of the check valves, but also replaces the pump at the low-speed to control output flow by adjusting the PWM signal. The pump and HSVs are the crucial components to control flow output. Firstly, the flow calculation models of the pump and the duty ratio inversed model of the HSV are obtained through experimental tests and the identification method. To get the control input signal for the required flow, the pump speed and PWM duty ratio for the HSVs are inversed to compensate for flow output. Further, a multimode digital flow distribution control method based on pump speed, mainly including the pump-controlled mode for large flow demand and valve-controlled mode for little flow demand, is proposed to control the accurate flow output actively. The step extension experiments based on the flow calculation models are conducted on the EHA-DD prototype under elastic, opposite varying load. The results demonstrate that the EHA-DD realizes little position error by accurate flow control, and it is also beneficial to improve the service life of the pump.     

西安某粘接材料厂室内供暖、热水系统的设计

基于厂方对供热系统的要求,根据供热建筑物、机房和可利用设施的实际情况,采用一台换热器,通过阀门的切换,实现了供暖和供热水的分段运行。将蒸汽发生器的进水与系统补水有机地整合为一个系统,有效地解决了机房面积过小的实际困难。利用自来水的压力和热水箱与浴室的高差解决了热水供应的实际问题。     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

射流管伺服阀前置级压力特性

为分析射流管伺服阀射流管喷嘴高压射流区的特性,建立了射流管伺服阀前置级数学模型,得到了射流管偏移值、射流管喷嘴半径和接收孔半径对接收器压力分布、喷嘴出口流速及接收器的左右孔恢复压力的影响规律.流场分析发现射流管喷嘴的高速射流出口处容易产生旋涡,且存在环状负压效应.结果表明:高压射流状态下,射流管喷嘴半径增大,恢复压力增加;接收孔半径增大,恢复压力降低.接收孔半径与射流管喷嘴半径之比的最佳取值区间为[1.3,1.5].当射流管偏移值增大时,在偏移值增大一侧,射流管与接收孔之间的有效流体接收面积增大,射流管与接收孔之间的流体旋涡扩大,内部流场环状负压效应增加,接收孔恢复压力降低.      

双独立闭环复合液压伺服控制体系的分析

针对现有几种液压伺服控制系统的优缺点,基于高性能和节能这一发展趋势,提出基于伺服电机、定量泵、蓄能器和伺服阀的双独立闭环的新型复合控制体系.分析了其结构特点,建立了数学模型并进行了仿真分析和实验验证,证明新型控制体系充分发挥了各个控制环节的效能,实现了流量适应,较现有的控制方案简单可靠,在综合指标方面有了很大的提高,适合机载液压系统和弹载液压系统.      

紧连阀轴流压气机变转速过失速瞬态模型

为了给各种压气机喘振主动控制器提供验证平台,提出了一个新的旋转失速及喘振模型.该模型在Moore-Greitzer轴流压气机过失速瞬态模型的基础上,考虑了转子动态及旋转失速高阶谐波对压气机气动稳定性的影响,并且在模型中增加了紧连阀作为执行机构.仿真结果表明:随着压气机转速的增加,压气机的失稳行为由旋转失速转为喘振;压气机转速的变化作为系统内部扰动,可能使压气机在节流阀开度较大时便进入气动失稳状态;虽然压气机初始扰动仅含有1阶谐波,但随着旋转失速的发展,高阶谐波强度不断增长而变得不可忽略.      

变循环发动机部件级建模技术

以双外涵变循环发动机为研究对象,建立了其整机部件级稳态及动态数学模型,建模过程中考虑了导叶角和导向器面积变化对压气机和涡轮部件特性的影响,考虑了模式选择活门面积变化对副外涵进口空气流量的影响,所建立的模型能够执行变循环发动机2种典型工作模式:稳态及模式切换过渡态仿真.仿真结果表明:随着模式选择活门逐渐关闭,前段风扇喘振裕度显著减小;双涵工作模式下发动机耗油率低,适用于亚声速巡航飞行;单涵工作模式下发动机单位推力高,适用于超声速巡航飞行.      

微型定容多次燃油喷射系统高速响应特性仿真

针对小排量发动机转速范围大、工作循环喷油量小的特点,提出了一种微型定容多次燃油喷射系统结构,建立了系统电、磁、液、机耦合模型,仿真计算了从输入电压到喷射输出的动态响应特性,分析了影响系统高速特性的关键因素.结果表明:该喷射系统响应频率可达到1000Hz,响应时间可以满足小排量发动机最高转速要求,具备工程可实现性.      

基于气动热力模型的FADEC系统FHA方法

从适航规章对全权限数字发动机控制(full authority digital engine control,简称FADEC)系统的安全要求出发,结合功能危险分析(functional hazard assessment,简称FHA)的一般原则和FADEC系统的特点,得到了FADEC系统FHA的分析要素.根据分析要素中的工具与数据需求,将航空发动机气动热力模型用于可调放气活门(variable bleed valve,简称VBV)控制功能失效危险分析,结果表明:①该模型能够辅助确定FADEC系统功能失效的发动机影响;②FADEC系统功能危险的模型分析方法通过定量分析确定发动机影响的危险等级,为FHA提供直观的参考依据,可作为对专家经验的补充.