圆柱贮箱内液体非线性稳态晃动实验及动力学特性分析

针对圆柱贮箱内液体非线性稳态晃动力和力矩动态信号的采集与分析问题,设计了一种能同时实现充液贮箱整体固定安装和液体动态晃动力、力矩精确测量的实验装置,给出了相应的实验数据采集、分析和处理方法。通过开展大量实验,将实验数据与CFD仿真结果进行细致对比后发现:在旋转晃动状态下,CFD仿真结果存在明显的计算偏差,不便被独立的用于完整揭示贮箱内液体晃动的真实特性。最后,归纳了贮箱内液体的非线性稳态晃动行为随横向外激励频率的变化规律,并对比分析了驻波晃动、拍振晃动、多类复杂的旋转晃动等多种不同形式的非线性稳态晃动行为对运载工具控制系统的任务执行效率和稳定性的影响。     

基于空域滤波的二维全极化散射中心快速提取

在全极化逆合成孔径雷达(ISAR)体制下,二维相干极化几何绕射(CP-GTD)模型能够精确描述雷达目标高频电磁极化散射特性。针对CP-GTD模型,提出了一种基于空域滤波的二维全极化散射中心参数快速提取方法。该方法利用空域滤波将二维全极化散射中心参数提取问题分解为多个一维全极化散射中心提取问题,进而利用一维旋转不变技术(1D-ESPRIT)分步对全极化散射中心各维参数进行联合估计,最后利用最小二乘方法获得相干极化散射矩阵的估计。此外,采用这样的分步估计过程,可以实现二维参数的自动配对。复杂度分析和仿真实验表明:该方法不仅能够显著降低运算量,并且还能获得较好的估计精度,可以有效地用于目标全极化散射中心提取。     

Convection of liquid with internal heat release in a rotating container

The convection of heat-generating fluid in a rotating horizontal cylinder is experimentally investigated. The threshold of convection excitation, the structure of convective flows and the heat transfer in the cylinder depending on the heat release capacity, liquid viscosity and aspect ratio of the cavity are studied. It is found that the average convection is excited by the thermovibrational mechanism —the gravity force, rotating in the cavity frame, produces the oscillations of non-isothermal fluid relative to the wall, which in turn result in excitation of mean convective flows. It is shown that the structure of convective flows depends on the dimensionless velocity of rotation. At relatively low rotation velocity the convection develops in the form of a periodic system of vortices regularly distributed along the cylinder axis. The threshold of excitation (critical value of vibration parameter) of three-dimensional vortex structures grows with rotation velocity. Above some definite rotation velocity the convection develops as two-dimensional rolls parallel to the axis of rotation. The threshold of two-dimensional structures excitation does not depend on the rotation velocity. Besides the structure of thermal convective flows the analysis of the relatively weak currents generated by the inertial waves below the threshold of convection is performed.     

旋转对气膜冷却影响的大涡模拟

采用大涡模拟,考察了旋转影响气膜冷却的物理机制。参考实验模型,用带有30°倾斜圆柱孔的平板模拟涡轮转子叶片的吸力面,冷气出口雷诺数为1300,冷气和主流的吹风比为0.5,计算了静止和旋转数为0.2两种条件下的流动和换热,全面展示了旋转对平均流场、涡量、湍流结构和壁面温度分布的影响,并由此对实验现象进行了解释。结果表明,旋转使气膜孔下游的对转涡对产生不对称性;旋转引发的哥氏力使气膜冷却流场中的发夹型漩涡结构向高半径方向偏移,引起涡量分布的改变;旋转破坏了发夹涡的连续性,减少了对主流的卷吸和主流传递给冷气的热量,从而提高了冷却核心区的冷却效率,与实验中观察到的现象一致。     

Planetary Magnetic Dynamo Effect on Atmospheric Protection of Early Earth and Mars

In light of assessing the habitability of Mars, we examine the impact of the magnetic field on the atmosphere. When there is a magnetic field, the atmosphere is protected from erosion by solar wind. The magnetic field ensures the maintenance of a dense atmosphere, necessary for liquid water to exist on the surface of Mars. We also examine the impact of the rotation of Mars on the magnetic field. When the magnetic field of Mars ceased to exist (about 4 Gyr ago), atmospheric escape induced by solar wind began. We consider scenarios which could ultimately lead to a decrease of atmospheric pressure to the presently observed value of 7 mbar: a much weaker early martian magnetic field, a late onset of the dynamo, and high erosion rates of a denser early atmosphere.     

Design and implementation of five-axis transformation function in CNC system

To implement five-axis functions in CNC system, based on domestic system Lan Tian series, an improved design method for the system software structure is proposed in this paper. The numerical control kernel of CNC system is divided into the task layer and the motion layer. A five-axis transformation unit is integrated into the motion layer. After classifying five-axis machines into different types and analyzing their geometry information, the five-axis kinematic library is designed according to the abstract factory pattern. Furthermore, by taking CA spindle- tilting machine as an example, the forward and the inverse kinematic transformations are deduced. Based on the new software architecture and the five-axis kinematic library, algorithms of RTCP （rotation tool center point control） and 3D radius compensation for end-milling are designed and realized. The milling results show that, with five-axis functions based on such software struc- ture, the instructions with respect to the cutter＇s position and orientation can be directly carried out in the CNC system.     

Modeling and analysis of solar Doppler difference bias with arbitrary rotation axis

The solar rotation causes the solar Doppler difference bias, which leads to the decline of the velocity measurement accuracy. Modeling and compensation are an effective solution. The limited model with specific geometric direction, where the solar rotation axis is perpendicular to the plane through the Sun, the Earth and Mars, was established. However, in fact, the geometric relationship among the Sun, Mars and the spacecraft is not fully in line with the hypothesis of the model due to the spacecraft orbital angle and the solar rotation axis drift. Thus, this model is not consistent with the fact. In order to solve this problem, a universal solar Doppler difference bias model, which provides the expression with arbitrary rotation axis, is established in this paper. In this method, for any point at the solar surface, four variables including the direction of the solar rotation linear velocity at this point, the distance from this point to the rotation axis, the vector from this point to Mars, and the vector from this point to the spacecraft are calculated. Based on these four variables, the solar Doppler difference bias corresponding to this point is obtained. The theoretical analysis and simulation results demonstrate that the solar Doppler difference bias model with the actual rotation axis is different from that with one of the specific rotation axes. Therefore, it is indispensable to build the proposed model for compensation. Besides, the direction of the solar rotation axis, the spacecraft-Mars-Sun angle and the spacecraft-to-Mars distance are important impact factors for the proposed model.     

Is the Earth’s orbital motion linked to the spin rotation of the Sun?

Time variations of the magnetic field of the Sun, seen as a star (the data 1968–2018, with more than 27 thousand daily measurements of the solar mean magnetic field), allowed to specify the rotation period of the gravitating solar mass: 27.027(6)?days, synodic. This indicates a presumably unknown physical connection between motions of the Sun and the Earth: in the course of a year our star accomplishes nearly 27 half-revolutions, while the planet itself performs an identical number of its spinnings during one complete axial revolution of the Sun. True origin of this strange Sun–Earth resonance is unknown, but it is supposed the phenomenon might be caused by slight coherent perturbations of gravity within the solar system.     

一种单子样旋转矢量姿态算法

旋转矢量姿态算法可有效抑制高动态环境下捷联惯导系统(SINS)产生的圆锥误差。当 直接应用多子样旋转矢量姿态算法时,会降低系统姿态更新频率;若要保持姿态更新频率, 则需要提高采样频率,从而增加了导航计算机的硬件负担,并导致量化误差突出。针对上述 不足,提出了一种利用当前及前N个姿态更新周期角增量的单子样旋转矢量姿态算 法,并在典型圆锥运动条件下推导了算法补偿项系数。此外,由于陀螺输出经过数字滤波处 理后其幅频特性的改变会影响圆锥误差的补偿效果,根据滤波器特性推导了单子样旋 转矢量姿态算法的修正算法,以便于在工程中推广应用。该算法在不降低姿态更新频率 的同时,可获得较高的解算精度,适于高动态环境应用,实验结果验证了上述算法的正确性 和有效性。
     

基于末制导雷达的海面舰船ISAR成像转角分析

针对末制导雷达对舰船目标ISAR成像中导引头不同飞行轨迹所能获得的转角问题展开研究。在末制导雷达平台和舰船目标同时运动的情况下,ISAR成像总转角由两部分组成：舰船航行、晃动所导致的转角和导引头飞行形成的转角。本文在对弹目相对总转角建模的基础上,通过估计舰船晃动参数来计算总转角,提出了基于该总转角的成像转角判断条件。仿真结果表明,本文提出的方法能有效估计成像时间内的总转角,并据此判断出弹目转角是否满足ISAR成像的转角条件。