脚尖数据的研究及其分析

大部分步态研究者将注意力投入到臀部和膝盖关节的角度变化所形成的步态特征,脚的步态特征关注还较少。针对这个问题深入研究了脚的一些特征,提取了脚尖数据进行分析,并对脚尖的坐标进行变换得到时域、频域及其他信息,在中科院数据库NLPR上进行试验和研究,表明脚尖的数据可以较好的区分男女性,甚至是不同的个体。脚尖数据的表示包含了较多的属性信息,有利于步态识别的进一步研究。     

地源热泵技术在建筑节能中的应用

本文探讨如何通过地源热泵技术实现建筑节能。研究通过地源热泵来实现一机多用,使其既能用于冬季供暖,又可以用于夏季制冷。同时也讨论了如何与太阳能相配合,来实现地热平衡。文中还给出了通过插值法和曲线拟合法对测量数据进行处理获得变温带和增温带的温度-深度曲线的方法。     

On the origin of ultrahigh energy cosmic rays

The origin of cosmic rays with energy E ? 10¹⁸ eV is a long-standing problem in astrophysics. The development of ever larger detectors has brought in key experimental results in the past decade, most particularly the detection of a cut-off at the expected position for the long sought Greisen–Zatsepin–Kuzmin suppression as well as evidence for large scale anisotropies. This paper summarizes and discusses the recent achievements in this field.     

Mean energy of response to galactic cosmic ray spectrum: IMP 8 and Climax neutron monitor

Solar modulations of galactic cosmic ray (GCR) intensity contain a wealth of information about their transport in the heliosphere. To extract this information from the data one studies the dependence of the observed modulations on the mean energy of response of detectors providing data for the analyses. There is a great deal of confusion about the detector energy response to GCR spectrum in the literature. We present a preliminary report on the computations of the mean energy of response for the Climax neutron monitor (CL/NM) and IMP 8 cosmic ray nuclear composition instrument to GCR protons for 1973–1998, covering the solar cycles 21 and 22. We find that for penetrating proton channel on IMP 8 the mean energy changes by a factor of over two whereas for the neutron monitor the change is only 21%. However, the corresponding change for the computed modulation function is a factor of about 3.5.     

国际空间太阳能电站的技术进展

综述了当前国际空间太阳能电站技术的研究进展与发展趋势。重点介绍了空间太阳能电站系统方案新构思“太阳塔”和“太阳盘”的特点；介绍了空间太阳能电站的主要相关技术———无线电能传输技术、太阳能转换技术和空间运输技术等的发展趋势；最后简要介绍了月球电站的进展情况。     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

Grinding performance evaluation of porous composite-bonded CBN wheels for Inconel 718

For high-efficiency grinding of difficult-to-cut materials such as titanium and nickel alloys, a high porosity is expected and also a sufficient mechanical strength to satisfy the function.However, the porosity increase is a disadvantage to the mechanical strength. As a promising pore forming agent, alumina bubbles are firstly induced into the abrasive layer to fabricate porous cubic boron nitride（CBN） wheels. When the wheel porosity reaches 45%, the bending strength is still high up to 50 MPa with modified orderly pore distribution. A porous CBN wheel was fabricated with a total porosity around 30%. The grinding performance of the porous composite-bonded CBN wheel was evaluated in terms of specific force, specific grinding energy, and grinding temperature, which were better than those of the vitrified one under the same grinding conditions. Compared to the vitrified CBN wheel, clear straight cutting grooves and less chip adhesion are observed on the ground surface and there is also no extensive loading on the wheel surface after grinding.     

环形编织层板冲击包容数值模拟

为分析航空发动机复合材料机匣对破断叶片的包容,采用有限元仿真方法开展了计算研究。通过旋转体与机匣冲击破坏过程的计算,确定机匣的包容能力。基于具备显式求解功能的商用有限元软件Abaqus/Explicit,采用3维实体单元网格,将2维3轴编织的碳纤维层合材料简化成连续的正交各向异性材料,通过软件提供的Vumat用户子程序接口编写Fortran代码定义材料模型,计算与转轴分离后的模拟断裂叶片对机匣的冲击过程。通过冲击后的临界转速和能量吸收数据,比较了模拟计算与实物旋转冲击模拟试验的结果,二者具有较大的可比性。虽然计算中还缺乏材料基本性能表征的理想数据,但在多种工况下仿真计算表明模拟结果稳定,有望成为复合材料包容分析实用有效的方法。     

基于能量法和特征值法的颤振预测数值方法研究

为研究适用于工程设计的颤振数值预测方法,采用能量法和特征值法对出现颤振现象的真实叶片进行预测。通过将2种数值方法的预测结果与试验结果进行对比,验证数值预测方法的精度和工程适用性。结果表明:2种方法都较准确的判断了某典型风扇转子叶片的气弹稳定性,与试验结果基本吻合,具有较高的工程实用价值。     

一种基于承载效率准则的复合材料机翼结构布局优化方法(英文)

提出一种针对大型复合材料机翼结构的二级布局优化策略。系统级根据结构形变调整设计指标,子系统级优化结构布局以满足系统级约束。将机翼壁板中各种临界失效载荷的接近程度作为评判结构效率的标准,通过将结构效率作为优化目标,保证了所求解问题的连续性。加筋壁板通过等效的正交异性板模拟,并根据能量原理预测总体失稳载荷。讨论了加强筋支持弹性对于蒙皮抵抗局部失稳性能的影响,并通过神经网络代理模型对其进行逼近。采用解析模型对失效特性做出评估,减少了计算资源的占用。最后以一种大型机翼结构的综合优化作为算例,计算结果满足设计要求,验证了该方法的可行性。