基于传热与压力损失的气-水换热器耦合设计

针对换热器设计中如何合理兼顾传热效率和压力损失的难题,以矩形流通截面的燃气-水列管式换热器为对象,从理论上分析了设计参数之间的内在联系,揭示了换热面积与燃气流通面积、横向管间距、换热管直径之间的匹配关系,建立了基于压力损失和传热计算的耦合设计方法。这种方法已成功应用于某大型燃气冷却器的设计,也可供其它换热器设计时参考。     

原子氧对Kapton／Al薄膜性能影响研究

模拟空间环境下原子氧辐照条件,通过采用固定的原子氧束流密度进行不同时间辐照试验,研究了温控涂层材料Kapton/Al薄膜的质量损失、光学性能、表面形貌和表面粗糙度的演化规律.试验结果表明,原子氧对材料的剥蚀量与原子氧的作用时间成正比例关系.材料辐照后太阳吸收率发生明显变化,而辐射率几乎不发生变化.辐照后试样表面的粗糙度,是影响太阳吸收率变化主要因素.随着辐照时间的增长,材料表面粗糙度增加,导致太阳吸收率增大.     

PBO纤维缠绕复合材料的初步应用研究

分别进行了PBO纤维缠绕成型的单向复合材料力学性能试验和150mm压力容器试验,与Kevlar-49和F-12纤维的单向复合材料力学性能及150mm压力容器性能进行了对比,初步的应用研究结果表明,缠绕成型的PBO/环氧150mm压力容器的容器特性系数PV/W和纤维强度转化率都达到最高,其值分别达到了60km和90%,但其容器的环向变形较F-12纤维复合材料容器的大。     

尖前缘翼干扰区的壁面压力和热流率分布

本文给出Ｍ＿∞＝７．８和６．７２，Ｒｅ＝３．５×１０￣７／ｍ和５．４×１０￣７／ｍ气流绕迎角为２０°、３０°和３５°尖前缘翼运动时，平板锥型干扰区的壁面压力和热流率分布。结果表明：（１）平板锥型干扰区的特征几何尺度与无粘激波角β＿０和翼迎角α相关，而壁面压力和热流率的峰值与法向马赫数Ｍ＿ｎ相关。（２）翼面压力和热流率分布由于受拐角涡影响，前者在翼根部呈波谷状，而后者呈波峰状，影响尺度与翼前缘处来流边界层厚度有关。     

压铸机压射速度的闭环控制设计

为了提高压射速度的控制精度,对压铸机的压射速度提出了闭环控制,设计一个有限拍无纹波调节器,使压射速度跟踪理想的速度曲线,并通过MATLAB的SIMULINK进行仿真,得到仿真曲线,验证了该方法的有效性.     

某型发动机新件涡轮叶片叶冠掉块故障分析

为排除某型发动机新件涡轮叶片叶冠掉块故障,对故障件进行尺寸检测、加工制造工艺复查、断口分析、结构和强度分析等,认为:引发故障的主要原因是叶冠转接R不圆滑、存在尖角,造成应力集中;而相邻原机件叶片弦宽尺寸超差,锯齿形工作接触面积小,以及非工作面局部碰磨,是引发故障的次要因素。采取并验证了有针对性的排故措施。     

A Comparative Study of the Influence of the Active Young Sun on the Early Atmospheres of Earth, Venus, and Mars

Because the solar radiation and particle environment plays a major role in all atmospheric processes such as ionization, dissociation, heating of the upper atmospheres, and thermal and non-thermal atmospheric loss processes, the long-time evolution of planetary atmospheres and their water inventories can only be understood within the context of the evolving Sun. We compare the effect of solar induced X-ray and EUV (XUV) heating on the upper atmospheres of Earth, Venus and Mars since the time when the Sun arrived at the Zero-Age-Main-Sequence (ZAMS) about 4.6 Gyr ago. We apply a diffusive-gravitational equilibrium and thermal balance model for studying heating of the early thermospheres by photodissociation and ionization processes, due to exothermic chemical reactions and cooling by IR-radiating molecules like CO₂, NO, OH, etc. Our model simulations result in extended thermospheres for early Earth, Venus and Mars. The exospheric temperatures obtained for all the three planets during this time period lead to diffusion-limited hydrodynamic escape of atomic hydrogen and high Jeans’ escape rates for heavier species like H₂, He, C, N, O, etc. The duration of this blow-off phase for atomic hydrogen depends essentially on the mixing ratios of CO₂, N₂ and H₂O in the atmospheres and could last from ∼100 to several hundred million years. Furthermore, we study the efficiency of various non-thermal atmospheric loss processes on Venus and Mars and investigate the possible protecting effect of the early martian magnetosphere against solar wind induced ion pick up erosion. We find that the early martian magnetic field could decrease the ion-related non-thermal escape rates by a great amount. It is possible that non-magnetized early Mars could have lost its whole atmosphere due to the combined effect of its extended upper atmosphere and a dense solar wind plasma flow of the young Sun during about 200 Myr after the Sun arrived at the ZAMS. Depending on the solar wind parameters, our model simulations for early Venus show that ion pick up by strong solar wind from a non-magnetized planet could erode up to an equivalent amount of ∼250 bar of O⁺ ions during the first several hundred million years. This accumulated loss corresponds to an equivalent mass of ∼1 terrestrial ocean (TO (1 TO ∼1.39×10²⁴ g or expressed as partial pressure, about 265 bar, which corresponds to ∼2900 m average depth)). Finally, we discuss and compare our findings with the results of preceding studies.     

吸力面翼刀对压气机叶栅内二次流的影响

1引言在叶轮机械叶栅内流动控制中,可以通过在叶片吸力面、端壁上安装翼刀或隔片,控制二次流的发展,降低二次流损失,其中将翼刀加装在吸力面上的控制方式即为吸力面翼刀控制技术。吸力面翼刀主要是通过阻断端壁附面层和叶片吸力面附面层近端壁处低能流动沿吸力面的展向迁移来对     

壁压法在低速闭口回流式风洞中的应用

本文介绍了由Hackett提出的一种估算大攻角洞壁干扰修正的壁压信息法。并利用四个几何相似、尺寸不同的平板机翼和翼-身组合体模型在南航NH-2风洞中进行了试验。试验和计算结果表明,该方法使用方便,修正结果准确可靠。但必须指出,对于试验段下游带有平衡缝的闭口回流风洞,洞壁测压数据需经适当的修正才能获得满意的结果。     

高压不稳定环境中的燃料液滴蒸发

对燃料液滴在高压不稳定环境中的蒸发进行了研究，着重讨论了气相介质压力振荡对液滴蒸发特性的影响，计算了Ｃ１２Ｈ２６液滴在Ｎ２介质中蒸发时的蒸发速率、滴温和无因次滴径随时间的变化。结果表明：（１）蒸发速率、滴温发生相同频率的振荡，相位滞后分别为π和π／２；（２）压力振荡使蒸发速率平均值增大，液滴生存时间减少；（３）在不定常加热阶段压力振荡影响很小。