流变模型对航空润滑油拖动系数计算的影响

模拟航空发动机轴承多种工况,测量了润滑油的拖动系数,并利用多种流变模型对拖动系数进行了理论计算。结果表明：弹流工况下,航空润滑油在滑滚比较小时表现为黏弹性,滑滚比较大时表现为黏性;流变模型的选择对于拖动系数的计算结果具有重要影响;不适合采用牛顿模型来预测弹流工况下润滑油的拖动系数;目前为止,在整个工况范围内采用Johnson-Tevaarwerk模型预测润滑油的拖动系数精度较高,但热效应较显著时预测热效应区的拖动系数有较大误差,该模型还需进一步完善。     

TC11钛合金片层组织热变形球化动力学过程

通过热压缩试验研究了TC11钛合金退火态片层组织在两相区980℃,950℃,850℃,应变速率0.001s-1,0.01s-1条件下,变形程度30%～70%范围内的热变形过程.分析了热变形参数对变形行为和片层组织球化过程的影响,并根据片层组织球化分数演变特征,建立了修正的Avrami 片层组织球化动力学方程,与试验数据吻合较好.     

置氢处理对TC4钛合金流变行为的影响

应用材料试验机及霍普金森压杆装置(SHPB)对切削用置氢TC4钛合金进行了静态和动态压缩实验,获得了不同温度和应变率下的应力-应变曲线。实验中应变率范围为0.001～15000s-1,温度范围为293～973K。分析比较了合金流变应力对温度及应变率的敏感性。结果表明,置氢TC4钛合金具有较强的热软化效应,而应变率强化效应则相对较弱。随氢含量的增加,流变应力呈现先减小后增大的规律,氢含量0.3%时,最大降幅达25%。根据流变应力的变化规律及相关切削理论,对实验中切削力及切削温度的变化情况进行了分析。最后基于Johnson-Cook本构模型,拟合了模型中的参数,其预测值与实验结果吻合较好。     

Fatigue behavior of direct laser deposited Ti-6.5Al-2Zr-1Mo-1V titanium alloy and its life distribution model

The present work aims to investigate the fatigue behavior of Direct Laser Deposition (DLD) Ti-6.5Al-2Zr-1Mo-1V titanium alloy under constant amplitude stress. 22 pieces of DLD Ti-6.5Al-2Zr-1Mo-1V titanium alloy standard cylinder specimens were tested under a stress level of 800?MPa with a stress ratio of 0.06. Fatigue fractography and fatigue life data were obtained. Through the fracture surface analysis, the specimens were divided into two categories in accordance with the location of crack initiation and defect types. Comparison of fatigue life and behavior between two specimen types was given, which was followed by a discussion about the impact of defect type, size and position on the fatigue life of the specimen. The fatigue test results also show a large variation of fatigue life. To illustrate the statistical characteristics of the fatigue life, probabilistic analysis was performed, and a novel bimodal lognormal model was established. The model has a good fit with the experimental data and can reduce the scatter of the fatigue life significantly.     

2219铝合金热变形行为对精密旋压成形的影响

采用Gleeble-3500热力模拟试验机对2219铝合金进行物理模拟。通过应力-应变曲线和金相组织观察研究了2219铝合金的高温塑性流变行为及其对合金旋压变形的影响。结果显示:2219铝合金在高温塑性变形过程中的流变应力主要受变形温度和应变速率的影响,变形量对其影响不明显;随着变形温度的提高或应变速率的降低,应力-应变曲线中的峰值应力和稳态流变应力均呈现下降的趋势。另外,采用"Gleeble"物理模拟+工艺试验的研制路线有助于实现2219铝合金大型结构件旋压成形的"控形",基于热模拟结果设计特征旋压温度(300～350℃)、进给比(0.6～1.5 mm/r)、变形量(30%)对2219铝板进行旋压变形,可获得内、外表面质量均良好的大型铝合金壳体,其壁厚差0.2 mm,且壳体内型面与理论型面样板单边间隙0.1 mm。     

Fatigue life prediction model of 2.5D woven composites at various temperatures

As one of the new structural layout in the family of woven composites, 2.5D Woven Composites(2.5D-WC) have recently attracted an increasing interest owing to its excellent properties, i.e. high specific strength and fatigue resistance, in the aerospace and automobile industry. Indepth understanding of the fatigue behavior of this material at un-ambient temperatures is critical for the engineering applications, especially in aero-engine field. Here, fatigue behavior of 2.5D-WC at different temperatures was numerically investigated based on the unit cell approach. Firstly, the unit cell model of 2.5D-WC was established using ANSYS software. Subsequently, the temperature-dependent fatigue life prediction model was built up. Finally, the fatigue lives alongside the damage evolution processes of 2.5D-WC at ambient temperature(20 ℃) and unambient temperature(180 ℃) were analyzed. The results show that numerical results are in good agreement with the relevant experimental results at 20 and 180 ℃. Fatigue behavior of 2.5D-WC is also sensitive to temperature, which is partially attributed to the mechanical properties of resin and the change of inclination angle of warp yarns. We hope that the proposed fatigue life prediction model and the findings could further promote the engineering application of 2.5D-WC, especially in aero-engine field.     

基于CDM的复合材料缺口强度三维数值仿真模型

层合板受载时在缺口尖端出现的沿纤维方向的基体开裂会使缺口钝化,降低缺口带来的应力集中影响。为了更好地模拟这一现象,建立基于CDM的三维有限元模型,提出一种可以实现层合板中每层网格不同排列的建模方法,使网格边缘与每层纤维方向一致;为了实现每层网格不同的排列,在层间建立内聚力接触模拟分层损伤;对纤维增强复合材料层合板[0/902/0]S和[0/90/±45]S进行开孔拉伸的渐进损伤分析。结果表明:该模型可以模拟不同材料体系和铺层参数的层合板在拉伸载荷作用下的渐进损伤过程,预测其破坏强度;通过已知的试验结果对模型进行验证,证明了该方法的正确性且预测精度较高。     

基于自由胀形的弯曲管材变形行为

随着制造业轻量化的发展趋势,复杂弯曲异形充液成形管件的应用日益广泛。为了更好地研究弯曲异形复杂管件在充液成形过程中的变形规律,进行可靠的工艺设计。本文通过结合薄膜理论和塑性变形理论对弯曲管件在自由胀形状态下的应力应变进行了理论解析,并通过有限元(FE)分析对理论计算模型进行了验证。FE分析结果与理论模型基本吻合。同时分析了管材在绕弯过程的硬化行为,并探索了在不同的弯曲硬化状态下弯曲管材在自由胀形过程下的破裂位置的规律,并且用实验进行了验证,实验结果与FE分析结果吻合。     

热轧AZ31镁合金超塑变形中的微观组织演变及断裂行为

通过热轧工艺制备了具有细晶微观组织的AZ31镁合金薄板。在250-450℃的温度范围和0.7×10-3-1.4×10-1s-1的初始应变速率范围内研究了热轧AZ31镁合金板的超塑性流变行为。分别通过光学显微镜和扫描电镜(SEM)观察了AZ31镁合金超塑性变形中的微观组织演变和断裂行为,并计算了不同温度下的变形激活能。结果表明,从300℃开始,热轧AZ31镁合金开始表现出超塑性的流变特征。在400℃,0.7×10-3s-1的变形条件下,最大延伸率可达362.5％,显示了良好的超塑性能。在300-400℃的超塑变形温度范围内,AZ31镁合金超塑变形的主要机制是由晶界扩散控制的晶界滑移,而变形温度和应变速率对AZ31镁合金断裂行为的影响主要体现在变形机制从晶内滑移到晶界滑移的转变。     

Effect of assisted transverse magnetic field on distortion behavior of thin-walled components in WEDM process

Machining performance of thin-walled components made by aeronautical difficult-toprocess materials is a significant issue in the aviation manufacturing industry. Although wire electric discharge machining-low speed(WEDM-LS) is one of typical non-contact machining processes without macro cutting force, which does well in removing hardness and brittleness materials via pulsed discharge at high temperature, but few researchers have studied the thermal distortion behavior leading to a considerable g...