石英谐振加速度传感器芯片设计与仿真

分体式石英谐振加速度传感器在性能提升上受到装配误差等因素的影响较大，故提出一种全石英谐振加速度计芯片结构，包括下层的硅结构和上层的石英结构。下层的硅基底仅作为支撑结构进行加工制作，敏感单元为全石英材料，硅结构与石英结构键合到一起，结构加工完成后去除硅材料，以释放石英敏感单元。整体结构为中心对称，包括质量块、音叉结构、微杠杆结构和应力分配梁，芯片通过微杠杆结构来增大传感器的灵敏度，并通过应力分配梁使石英音叉两根振梁上的内应力均匀一致。通过仿真验证了设计的有效性，仿真的差动灵敏度为35Hz/g。     

基于连续损伤模型的复合材料波纹梁压溃分析

复合材料的耐撞性受到了广泛重视,而波纹梁因其优异的抗屈曲构型被广泛应用于飞机翼梁和直升机底板等经常发生碰撞的结构中。进行了复合材料波纹梁的屈曲分析,研究了高度对波纹梁破坏模式的影响。建立复合材料波纹梁的连续损伤单波模型,层内基于Hashin判据建立含损伤因子的损伤刚度矩阵,层间根据二次名义应力准则和B-K准则模拟损伤演化,并通过典型复合材料波纹梁压溃试验验证了所建立模型的正确性。基于单波分析模型,通过施加周期性边界条件和反对称边界条件,研究了多波结构的吸能特性。     

运载火箭主动段自适应增广控制

针对运载火箭上升段在复杂飞行环境、大不确定性干扰和振动等因素的影响下，传统PID控制方法难以满足高品质控制需求的问题，进行了自适应增广控制(AAC)方法研究，以实现对运载火箭姿态的精确控制。在深入分析自适应增广控制系统整体构架的基础上，通过标称PID控制器设计与基于粒子群优化(PSO)的数字滤波器设计实现了刚体控制及对弹性振动的抑制；继而针对大范围干扰、不确定性和由于滤波器切换产生的弹性振动影响，设计了在线调整算法自适应调节PID控制增益，并对其工作机理与参数设计原则进行研究；然后设计干扰补偿回路和主动减载回路以减小内外扰动、弹性振动和风载荷影响；最后在弹性振动、风干扰和参数不确定性等因素同时作用的状态下进行仿真分析，验证了自适应增广控制系统能够有效应对运载火箭主动段复杂飞行环境的影响，大幅度提升综合控制性能，具有理论研究意义与工程应用价值。     

Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry (PIV) techniques. There are three near-wall topological patterns with different Angles of Attack (AoAs): the separation bubble, the Leading-Edge Vortex (LEV) and the high AoAs flow. For the separation bubble pattern, two saddles and two foci form in the middle of the model. The features of the LEV pattern are the leading-edge separation lines. The topological characteristics of the separation lines are changed by the interaction between the LEV and the Wing-Tip Vortex (WTV). For the high AoAs flow pattern, four unstable foci are found at the forewing and the hindwing respectively. The angle between the trajectory of the WTV and the model increases with increasing AoA even though the slope of the WTV angle versus AoA curve declines at the moderate AoAs.     

地球静止轨道微波辐射计技术

静止轨道微波辐射计可实现全天时、全天候、高频次云雨大气观测,在台风、流域性强降水探测和预报方面发挥重要作用。但在波束扫描、多频复用、系统定标等方面的运用存在较大困难,世界上尚无在轨应用先例。现从探测需求出发,对静止轨道微波辐射计进行了系统方案设计。提出了卫星平台与辐射计部件快慢结合扫描的方法,以解决波束扫描和系统定标难题;提出了低频选入射角层叠式布局准光学频段分离方法,以解决多频段复用难题。研制了微波辐射计原理样机,通过实验室和外场试验验证了系统设计,为静止轨道微波探测卫星研制提供了一定指导。     

Formation flying reconfiguration manoeuvres via environmental forces in highly elliptical orbits

A study on reconfiguration manoevres applied to a tetrahedral formation in highly elliptical orbits is proposed, by using a propellantless solution. The manoeuvring strategy consists in exploiting certain environmental forces, specifically those provided by solar radiation pressure and atmospheric drag, by actively controlling the satellites’ attitudes. Through inverse dynamics particle swarm optimization the optimal attitudes required for the manoeuvres are evaluated, whereas the configuration’s evolution is simulated by a high-fidelity orbital simulator. The goal of the reconfiguration problem is to find an optimal control in order for the four spacecraft to reach a desired configuration in a specified portion of orbit, where the desired configuration is evaluated by a shape and size geometric parameter. By increasing the manoeuvring time and the satellites’ area to mass ratio, all the case studies considered are successfully verified.     

超视距机载武器双向数据链通信方法研究

通过分析超视距机载武器双向数据链的通信机制和工作原理,提出了一种建立数据链通信的方法。针对机载武器数据链通信中因高度误差而可能造成的波束指向误差,提出了一种初始通信波束指向保持方法,建立了相应的误差分配及波束指向模型。通过仿真计算,对该方法的正确性和有效性进行了验证,并对数据链通信时载机火控弹道解算模型的精度提出了指标要求,使数据链的应用工况得到了进一步拓展。     

Application of a PCA-DBN-based surrogate model to robust aerodynamic design optimization

An efficient method employing a Principal Component Analysis (PCA)-Deep Belief Network (DBN)-based surrogate model is developed for robust aerodynamic design optimization in this study. In order to reduce the number of design variables for aerodynamic optimizations, the PCA technique is implemented to the geometric parameters obtained by parameterization method. For the purpose of predicting aerodynamic parameters, the DBN model is established with the reduced design variables as input and the aerodynamic parameters as output, and it is trained using the k-step contrastive divergence algorithm. The established PCA-DBN-based surrogate model is validated through predicting lift-to-drag ratios of a set of airfoils, and the results indicate that the PCA-DBN-based surrogate model is reliable and obtains more accurate predictions than three other surrogate models. Then the efficient optimization method is established by embedding the PCA-DBN-based surrogate model into an improved Particle Swarm Optimization (PSO) framework, and applied to the robust aerodynamic design optimizations of Natural Laminar Flow (NLF) airfoil and transonic wing. The optimization results indicate that the PCA-DBN-based surrogate model works very well as a prediction model in the robust optimization processes of both NLF airfoil and transonic wing. By employing the PCA-DBN-based surrogate model, the developed efficient method improves the optimization efficiency obviously.     

基于Tanaka-Mura模型的电子束焊接头疲劳裂纹萌生模拟

为揭示高温合金电子束焊接头的疲劳特性,对其开展了疲劳裂纹萌生数值模拟研究。考虑焊缝区微观组织特性,对Voronoi图法进行改进,建立了焊缝区包含柱状晶、细等轴晶及粗等轴晶的混合晶区微观组织模型;对ABAQUS进行二次开发,考虑晶粒随机取向,生成晶粒多滑移带模型。基于Tanaka-Mura位错滑移模型,编写了疲劳裂纹萌生算法,考虑晶界处裂纹的连接与合并,对算法进行了改进,并结合有限元计算建立了电子束焊接头疲劳裂纹萌生数值模拟方法。基于上述方法对GH4169电子束焊接头不同载荷大小的疲劳裂纹萌生进行数值模拟,分析了裂纹萌生过程及萌生寿命,并与试验结果进行对比验证;还探讨了不同热影响区晶粒尺寸对焊接接头疲劳裂纹萌生的影响规律。结果表明,电子束焊接头疲劳裂纹均萌生于热影响区,但随着载荷水平的提高,萌生位置向熔合区一侧靠近;当热影响区晶粒尺寸与母材区晶粒尺寸越接近时,接头疲劳寿命越长。     

光波纳米推进技术中的表面等离激元增益光镊作用机理

为研究天线不同结构对表面等离激元（SPP）增益光镊作用的影响,建立天线-基底的电磁波传输耦合激元电场触发光梯度力的数值模型,并利用数值模型分析天线不同结构对SPP电场的影响规律,同时,这种电场变化规律对光镊增益有直接的数学关系,基于上述物理机制,获得不同天线结构对光梯度力产生的优化策略。为验证上述物理机制与优化策略的有效性,开展纳米颗粒的粒子图像测速（PIV）试验,天线材料为银,基底为二氧化硅,纳米颗粒为银,试验能够完好地观测到纳米颗粒在天线通道的运动情况。结果表明,光梯度力的增益机制在于激元电场强度和梯度两方面因素,前者随天线不对称性增强而先增大后减小,后者呈现一直增大趋势;纳米颗粒推动作用力的计算误差约为5.5%~13.8%,且试验值与计算值的趋势相符,一方面验证本文研究机理及优化策略的有效性,另一方面证明PFP技术的原理可行。