First results from the LUCID-Timepix spacecraft payload onboard the TechDemoSat-1 satellite in Low Earth Orbit

The Langton Ultimate Cosmic ray Intensity Detector (LUCID) is a payload onboard the satellite TechDemoSat-1, used to study the radiation environment in Low Earth Orbit ($～$635?km). LUCID operated from 2014 to 2017, collecting over 2.1 million frames of radiation data from its five Timepix detectors on board. LUCID is one of the first uses of the Timepix detector technology in open space, with the data providing useful insight into the performance of this technology in new environments. It provides high-sensitivity imaging measurements of the mixed radiation field, with a wide dynamic range in terms of spectral response, particle type and direction. The data has been analysed using computing resources provided by GridPP, with a new machine learning algorithm that uses the Tensorflow framework. This algorithm provides a new approach to processing Medipix data, using a training set of human labelled tracks, providing greater particle classification accuracy than other algorithms. For managing the LUCID data, we have developed an online platform called Timepix Analysis Platform at School (TAPAS). This provides a swift and simple way for users to analyse data that they collect using Timepix detectors from both LUCID and other experiments. We also present some possible future uses of the LUCID data and Medipix detectors in space.     

低轨天基信息定向分发区域分割编码控制方法

为提高低轨指向性信息分发链路的频谱利用效率，从天基分发平台与地面用户的相对位置关系入手，建立了分发指向、编码增益与信道传输容量的量化关系。在此基础上，提出一种低轨天基信息定向分发区域分割编码控制方法，该方法针对不同信息分发区域，采用最小均方误差(MMSE)作为区域分割准则选择编码方式，既提升了信道传输效率也便于工程实现。最后，本文通过仿真分析了方法的效能和性能影响因素，并与现有自适应编码方法进行了对比，验证了本方法的有效性和可靠性。     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

微带介质基片介电常数的导内波长法测量

介绍了一种通过测量微带的导内波长来间接测量介质基片的介电常数的方法,给出了导内波长的测量方法,介电常数的计算公式,以及推导出测量误差分析的数学模型。并举实例加以说明。     

多关节坐标测量机结构参数的校准

多关节坐标测量机末端测头的位置准确度主要受各杆件结构参数误差的影响,为提高多关节坐标测量机的测量准确度,必须对各杆件的结构参数进行校准。首先应用ＤＨ 分析方法,建立了多关节坐标测量机的运动学模型,然后提出了一种简单、快速的单点 多姿态校准方法,运用全微分、最小二乘法和迭代算法等数学方法,建立了校准模型。实验表明,该校准方法适合于多关节坐标测量机结构参数真值的获得,并可极大地提高测量机的位置准确度。     

两点法测量直线度中传感器对齐误差的探讨

针对以往关于两点法测量直线度的文献中要求两传感器端部严格对齐的问题,进行了数学分析和计算机仿真,证明对齐误差并不影响最后的误差分离准确度,同时可在一定程度上降低对传感器安装误差的要求。     

用两颗GPS卫星确定低轨卫星轨道的初值方法

研究了用两颗全球定位系统（ＧＰＳ）卫星粗略确定低轨卫星轨道的问题,并着重讨论了其中的初值问题,给出了一种有效的初值方法。实验结果证明：这种方法能给出一个确定的、实用的初值,大大减少了初轨计算的计算量,并使得算法收敛更加有保障。在工程实用方面比传统的猜测方法具有较大的优势。     

GPS在卫星精密测轨中的应用

自从美国全球定位系统(GPS)试验系统建立以来,发展了各种各样的方法,利用GPS 测量来精密确定卫星轨道。在1984年,LANDSAT-5上装载一个GPSPAC 的仪器进行了飞行,以验证用GPS 定轨的精确度。1982年在美国喷气推进试验室((?)PL),为TOPEX 卫星研究了一种GPS 距离和距离变化率的双差分法,以满足其厘米级的精度要求。除GPS 对低轨地球卫星定轨应用外,有人也提出了用GPS 测量对高轨地球卫星甚至同步卫星的定轨方法及精度分析。文章对上述各种方法给以简要的介绍和评述。     

减法消除CCD太阳Hα图象干涉条纹的误差分析

本文简要介绍了CCD产生干涉条纹的原因,对采用减法消除干涉条纹方法进行了论述。通过试验研究,提出了一种计算误差的方法,并对计算结果进行了分析和讨论。