无定向激光陀螺捷联惯组标定方法的对比研究

对三种无定向激光陀螺捷联惯组标定方法进行了对比研究,详细分析了各种方案的标定原理,提出了利用标准差作为评价标定方法优劣的指标.结合对某一激光陀螺捷联惯组标定试验结果的分析,得到了在无北向基准的情况下,三种标定方法在标定时间和标定精度两个指标上的对比结果,为无定向激光捷联惯组的标定提供了指导,具有较大的工程应用价值.     

根据两颗导航星信息估计捷联惯导系统误差的一种方法

针对高机动短时间飞行的飞行器,介绍了一种根据它相对2颗导航卫星的伪距离和伪速度信息,估计捷联惯导系统定位和定速度误差的方法.考虑到由确定飞行器相对每颗星的径向距离和速度的非线性方程施加的约束,根据这些误差矢量长度最小值的条件确定误差值.用空间解析几何法得出了计算捷联惯导系统误差估值的最终算法,这种算法能给出非线性最小值问题的精确解.     

线对空间回转轴线的平行度测量方法的研究

提出一种线对空间回转轴线平行度的测量方法，并进行误差分析。     

自动转移飞行器的轨控总体方案

介绍了欧空局的自动转移飞行器（ATV）的轨道控制方案和技术。给出了ATV的飞行方案、测量敏感器和执行机构的配置，以及在空间站调相段、寻的段、接近段和最终逼近段的轨控策略。     

我国BPL时号的频率控制系统及结果分析

根据我国现行ＢＰＬ时号的频率控制系统，分析ＴＢＰＬ时号频率控制系统的缺陷，对目前ＢＰＬ时号的频率稳定性进行了评价，提出了一种新的频率控制方案。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

自由返回轨道的P平面参数快速设计方法

针对自由返回轨道求解过程中地心轨道类型变化造成的B平面参数方法计算失败问题,提出一种基于P平面参数的自由返回轨道快速设计方法。首先,基于轨道半通径参数的普适性,给出了不同轨道类型的P平面参数定义,建立了以P平面参数为求解目标量的自由返回轨道求解模型。其次,给出了基于P平面参数的自由返回轨道快速设计方法,在构建的瞬时地月惯性系下,以平面双二体自由返回轨道作为初值,实现了高精度力模型下的自由返回轨道快速求解。对8种构型自由返回轨道的设计结果表明,P平面参数具有类似于B平面参数的大收敛域,且有效解决了轨道类型变化对计算的影响,可直接应用于中国后续月球探测任务轨道设计。     

自动化计量学大会展出的坐标测量机

介绍自动化计量学大会展出的坐标测量机及其结构，性能和使用范围。     

Dynamical evolution of high area-to-mass ratio debris released into GPS orbits

A large set of simulations, including all the relevant perturbations, was carried out to investigate the long-term dynamical evolution of fictitious high area-to-mass ratio (A/M) objects released, with a negligible velocity variation, in each of the six orbital planes used by Global Positioning System (GPS) satellites. As with similar objects discovered in near synchronous trajectories, long lifetime orbits, with mean motions of about 2 revolutions per day, were found possible for debris characterized by extremely high area-to-mass ratios. Often the lifetime exceeds 100 years up to A/M ∼ 45 m²/kg, decreasing rapidly to a few months above such a threshold. However, the details of the evolution, which are conditioned by the complex interplay of solar radiation pressure and geopotential plus luni-solar resonances, depend on the initial conditions. Different behaviors are thus possible. In any case, objects like those discovered in synchronous orbits, with A/M as high as 20–40 m²/kg, could also survive in this orbital regime, with semi-major axes close to the semi-synchronous values, with maximum eccentricities between 0.3 and 0.7, and with significant orbit pole precessions (faster and wider for increasing values of A/M), leading to inclinations between 30° and more than 90°.