Artificial equilibrium points for a solar balloon in the α Centauri system

This paper discusses the generation, stability, and control of artificial equilibrium points for a solar balloon spacecraft in the α Centauri A and B binary star system. The continuous propulsive acceleration provided by a solar balloon is shown to be able to modify the position of the (classical) Lagrangian equilibrium points of the three-body system on a locus whose geometrical form is known analytically. A linear stability analysis reveals that the new generated equilibrium points are usually unstable, but part of them can be stabilized with a simple feedback control logic.     

一种基于激光雷达的航天器隐藏点测量方法

为保证航天器各系统的仪器安装满足在轨姿态、轨道控制等要求,需对其安装位置及姿态进行检测,但一些隐藏的目标却无法直接测得。文章提出了一种基于激光雷达测量系统的隐藏点测量方法,针对激光雷达测量坐标系的建立以及应用高精度平面镜进行隐藏点测量进行了数学模型的分析,并对测量系统的不确定度进行了评估。结果表明,在保持测量环境稳定的情况下,应用激光雷达进行航天器隐藏点测量的标准不确定度优于0.1071 mm。     

Alternative transfer to the Earth–Moon Lagrangian points L4 and L5 using lunar gravity assist

Lagrangian points L4 and L5 lie at 60° ahead of and behind the Moon in its orbit with respect to the Earth. Each one of them is a third point of an equilateral triangle with the base of the line defined by those two bodies. These Lagrangian points are stable for the Earth–Moon mass ratio. As so, these Lagrangian points represent remarkable positions to host astronomical observatories or space stations. However, this same distance characteristic may be a challenge for periodic servicing mission. This paper studies elliptic trajectories from an Earth circular parking orbit to reach the Moon’s sphere of influence and apply a swing-by maneuver in order to re-direct the path of a spacecraft to a vicinity of the Lagrangian points L4 and L5. Once the geocentric transfer orbit and the initial impulsive thrust have been determined, the goal is to establish the angle at which the geocentric trajectory crosses the lunar sphere of influence in such a way that when the spacecraft leaves the Moon’s gravitational field, its trajectory and velocity with respect to the Earth change in order to the spacecraft arrives at L4 and L5. In this work, the planar Circular Restricted Three Body Problem approximation is used and in order to avoid solving a two boundary problem, the patched-conic approximation is considered.     

样本重复使用失效响应曲线分析结构可靠度方法

用基于样本重复使用失效响应曲线逼近法,为充分利用迭代过程中的样本点,提出了样本重复使用的思想,并由此发展出一种结构可靠度的计算方法.利用可靠度指标作为收敛条件,从迭代收敛后的所有样本点中选取靠近失效界线处的样本点构造失效曲线响应函数,最后通过蒙特卡洛抽样的方法计算可靠度.多个算例表明:该响应函数避免了对传统意义上的功能函数响应面的模拟,降低了模型维数,又由于适当地 引入了带交叉项、具有曲线旋转功能的响应函数,因此能够很好地逼近失效曲线,有效地提高可靠度计算精度.      

阻尼不相似动力学模型的时域响应修正方法

 动力学相似的缩比模型试验中,阻尼往往难以保证相似,使得缩比模型的动响应测试数据难以直接换算到结构原型上,因此提出一种阻尼不相似动力学模型的时域响应修正方法来解决这一问题。该修正方法假定缩比模型的阻尼可用比例阻尼模型近似表征,并直接从实际缩比模型与理想缩比模型的一般强迫振动响应计算方程出发,利用线性系统的叠加原理和模态叠加法,将动响应修正量的求解转换为理想模型在一个等效附加激励力作用下的时域响应求解。同时,针对实际工程中响应测点数目有限的问题,利用模态缩聚法进行了未测量点的响应反演。该修正方法仅需已知结构原型和实际缩比模型的模态阻尼比,以及准确建立的实际缩比模型的质量矩阵和刚度矩阵,即可实现实际缩比模型在任意激励工况下的测试动响应修正。以某型飞机的翼梁缩比模型为研究对象,对所提出的响应修正方法进行了验证。试验和计算结果对比分析表明,修正后的响应功率谱密度(PSD)和响应的均方根(RMS)值与理想模型基本一致,表明了本文方法的可行性和有效性。     

一种新的共线平动点拟周期轨道稳定保持策略

限制性三体问题下共线平动点附近的拟周期轨道在深空探测中具有重要的实际应用价值,得到了各航天大国的广泛重视。通过将动力学中心流形结构引入轨道控制方法的设计之中,得到了基于投影到中心流形的共线平动点拟周期轨道稳定保持策略。首先推导了会合坐标到中心流形坐标的正则变换方法,在此基础上设法通过引入轨道机动,将偏差状态点投影到中心流形上,从而达到消除不稳定分量的目的。该方法充分整合了平动点的动力学特性,并且也适用于周期轨道的稳定保持。通过对Lissajous轨道和晕轨道的数值仿真表明,该方法较以往方法具有更强的稳定性,能在显著降低轨控燃料消耗的基础上达到较好的稳定保持效果。     

基于统计学方法的卫星在轨热变形快速分析

为使用在轨实测温度数据辅助完成成像载荷视轴指向的在轨标定,首次将应用于地统计学中的普通克里格法用于卫星在轨温度场的无偏估计,提出了一种基于统计学方法的在轨热变形快速分析方法。应用热试验过程中星上少量温度实测数据进行卫星温度场的无偏估计,并将温度计算结果赋值到有限元模型,进而完成了热变形分析。应用此种方法,相比通过热物理方法进行温度场分析,可将热变形分析的工期缩短数日,且载荷变形的分析结果与试验实测结果的误差在1′左右,可较准确地得到载荷视轴在热变形作用下的指向变化。文章可为卫星在轨热变形的快速分析提供参考。     

空间非合作目标的多视角点云配准算法研究

为了提高相邻视角间稀疏扫描点云数据配准的速度和精度,实现多视角点云精确配准,提出一种基于KD Tree点云均匀采样简化算法,并且对传统四点算法（4 PointsCongruentSetsAlgorithm,4PCS）中的阈值参数进行了统一,确定了各误差阈值参数和点云密度之间的关系,通过基于姿态校正的方法有效解决了对称视角点云引起的误配准问题。仿真结果表明,该方法能够快速、有效地实现卫星稀疏点云的配准。     

Autonomous navigation to quasi-periodic orbits near translunar libration points

Libration-point missions have been very useful and successful. Due to the unstable nat-ures of most of these orbits, the long-time stationkeeping demands frequent maneuvers and precise orbit determinat...     

Comparison of ionosphere characteristic parameters obtained by ionosonde with IRI-2007 model over Southeast Asia

In this work, the foF2 and hmF2 parameters at the conjugate points near the magnetic equator of Southeast Asia are studied and compared with the International Reference Ionosphere (IRI) model. Three ionosondes are installed nearly along the magnetic meridian of 100°E; one at the magnetic equator, namely Chumphon (10.72°N, 99.37°E, dip angle 3.0°N), and the other two at the magnetic conjugate points, namely Chiang Mai (18.76°N, 98.93°E, dip angle 12.7°N) and Kototabang (0.2°S, 100.30°E, dip angle 10.1°S). The monthly hourly medians of the foF2 and hmF2 parameters are calculated and compared with the predictions obtained from the IRI-2007 model from January 2004 to February 2007. Our results show that: the variations of foF2 and hmF2 predicted by the IRI-2007 model generally show the similar feature to the observed data. Both parameters generally show better agreement with the IRI predictions during daytime than during nighttime. For foF2, most of the results show that the IRI model overestimates the observed foF2 at the magnetic equator (Chumphon), underestimates at the northern crest (Chiang Mai) and is close to the measured ones at the southern crest of the EIA (Kototabang). For hmF2, the predicted hmF2 values are close to the hmF2(M3000F2_OBS) during daytime. During nighttime, the IRI model gives the underestimation at the magnetic equator and the overestimation at both EIA crests. The results are important for the future improvements of the IRI model for foF2 and hmF2 over Southeast Asia region.