基于积分多普勒平滑伪距的导航算法研究

载体处于高动态机动、障碍遮挡、信号干扰和多路径等复杂环境时,GNSS接收机跟踪环路易发生信号失锁和相位失调,导致载波相位观测值发生较大变化,采用载波相位平滑伪距将严重影响导航精度。为改善GNSS接收机导航性能,对电离层效应及延时校正模型进行了研究,基于α-β滤波算法提出了基于积分多普勒平滑伪距的导航算法。实验结果表明:采用该算法在静态、动态条件下定位精度优于5m,测速精度优于0.05m/s,可显著提高GNSS接收机的导航精度。     

高精度VLBI技术在深空探测中的应用

介绍了适合单探测器测定轨的高精度VLBI技术和适合多探测器测定位的同波束VLBI技术的研究进展。利用"嫦娥3号"着陆器的ΔDOR型VLBI观测,得到了误差0.67ns的VLBI群时延数据。利用"嫦娥3号"着陆器和月球车的同波束VLBI观测,得到了随机误差0.3ps的差分相时延数据,以数厘米的灵敏度监测出月球车的移动、转弯等动作,并把月球车的相对定位精度提高至1m。针对深空探测,提出了使VLBI时延测量精度进一步提高所需要开展的部分研究内容。     

复杂薄壁构件自适应加工工艺几何模型重构

随着制造理念和制造水平的不断提高,大量复合制造工艺背景下的近净成形叶片被应用到现役或在研的航空发动机中。该类叶片是典型的复杂薄壁结构零件,无精确定位基准,且成形一致性差。采用传统叶身定位,加工后的前/后缘、榫齿形状和位置精度均难以保证,从而导致产品一致性差,易超差与合格率低。针对以上问题,提出一种面向自适应加工的复杂薄壁结构零件工艺几何模型重构方法。首先,建立复杂曲面的采样点分布模型,快速获取叶片精确成型区域的位置和形状;其次,提出基于特征曲线相似变形的模型重构算法,精确重构前/后缘非精确成型区域的工艺几何模型;最后,通过精锻叶片自适应加工试验进行验证。试验结果表明：该方法可有效满足以精锻叶片为代表的复杂薄壁构件自适应加工要求。     

基于MHSS算法的ARAIM完好性和可用性预测

传统的接收机自主完好性监视只能提供非精密进近阶段的完好性监视,无法实现对完好性要求更加严格的飞行阶段的监视,而高级接收机自主完好性监视（AdvancedReceiverAutonomousIntegrityMonitoring,ARAIM）可以在精密进近阶段为飞机提供满足航向信标性能垂直引导（LocalizerPerformancewithVerticalguidance,LPV）的完好性监视服务。文章基于多假设分组解算法,根据目前的星座环境,结合民航不同飞行阶段的应用需求,对ARAIM算法进行仿真研究。针对水平保护级（HorizontalProtectionLevel,HPL）和垂直保护级（VerticalProtectionLevel,VPL）的指标,在不同星座组合环境下,选取南北半球不同经纬度的5个观测机场,分别仿真了HPL和VPL的变化情况,并对全球HPL和VPL平均分布趋势,以及以99%的概率满足LPV-200进近可用性指标时,ARAIM可用性的全球覆盖率进行了仿真预测分析。仿真结果表明,不论是全球定位系统和格洛纳斯双星座还是增加北斗卫星导航系统后的三星座,5个观测机场的HPL和VPL均能满足LPV-200进近对完好性指标的要求;但在全球范围内,双星座条件下,ARAIM并不能完全支持LPV-200进近对完好性监视的要求,而三星座则可大大提高ARAIM的可用性,为民航用户提供满足精密进近的所需导航服务性能。     

基于标定及补偿提高串联机器人定位精度方法

在使用串联机器人进行定位操作前,首先需要对机器人基坐标系与测量坐标系进行位姿关系的标定,针对具有隐藏机器人基坐标系以及机器人法兰坐标系的串联机构,本文提出一种等价变换思想并结合应用激光跟踪仪测得机器人末端靶标点的坐标数据建立标定矩阵方程,应用罗德里格矩阵变换将标定方程转化为三元二次矩阵方程形式,采用最小二乘法和牛顿迭代法求出数值解进而完成机器人基坐标系与测量坐标系标定的方法。然后应用这种方法进行标定试验得到了20组标定结果,通过比较标定结果偏差进而验证了这种方法的正确性。最后,本文验证了应用这种标定方法的标定结果并结合一种新的位姿补偿算法后,能极大地提高机器人末端的定位精度。     

回转复杂曲面零件在线精密测量技术

针对复杂曲面零件的面形测量难题,提出以超精密机床作为栽体,利用高精度触发式测头,采用接触式的轮廓测量方法,检测曲面零件的子午面曲线,再与理论曲线相比较得出被测零件的面形精度.测量试验分析表明:该测量方法的检测精度高,通用性强,在实际加工和检测应用中具有很高的实用价值和应用前景.     

利用GNSS实现高轨卫星自主导航的新方案

针对GNSS应用于GEO卫星导航存在的导航信号弱、可见卫星少、定位几何差等突出问题,探讨了一种在GPS导航星冲天面安装导航天线并辐射导航信号的新方案,设计了冲天面天线和GEO接收天线的波束宽度和增益以及讨论了冲天天线所需发射功率,分析了新方案中GEO卫星对GPS卫星可见性、GDOP和定位精度。分析表明,新方案仅需从现有导航星引出一部天线,即可实现以小于10W的功率代价使得GEO卫星80%以上的时间里可以利用GPS系统定位,且定位精度约77m。通过仿真验证了本方案的可行性。     

X-ray pulsar navigation method for spacecraft with pulsar direction error

In order to reduce the impact of the pulsar direction error on the navigation system performance, a novel X-ray pulsar navigation technique is proposed. Through analyzing the system bias caused by the pulsar direction error, it can be seen that the system bias is slowly time-varying. Based on the analysis result, the augmented state unscented Kalman filter (ASUKF), in which the system bias is treated as the augmented state, is designed here to deal with the system bias and estimate spacecraft’s positions and velocities. The simulation results demonstrate the effectiveness and robustness of the proposed navigation method. The ASUKF-based navigation method for spacecraft is more accurate than the method based on unscented Kalman filter (UKF) in the presence of the pulsar direction error.     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.