数控车削加工的参考点及对刀分析

本文深刻分析了数控车床的对刀原理和对刀涉及的基本概念, 从工件坐标系建立与对刀关系的角度展开论述,说明对刀的实质,以及常用刀具的对刀方法与步骤.     

嫦娥一号卫星数据高可靠性保护设计

针对我国第一个月球探测器的特点，对星载网络数据保护做了专门的设计。文章着重介绍了嫦蛾一号卫星星载数据高可靠性保护的设计方案与具体实现情况。     

Effects of TADs on the F region of the mid-latitude ionosphere during an intense geomagnetic storm

Based on observations of two ionosondes at Wuhan and Kokubunji, this paper presents effects of TADs on the daytime mid-latitude ionosphere during the intense geomagnetic storm on March 31, 2001. During a positive ionospheric storm, the start of the enhancement of the foF2 (F2 peak plasma frequency) at Wuhan lags that at Kokubunji by 15 min, which corresponds to the time interval of traveling atmospheric disturbances (TADs’) propagation from Kokubunji to Wuhan. Associated with the uplifting of the hmF2 (height of F2 peak) caused by TADs, it is observed by the two ionosondes that the F1 cusp becomes better developed. Therefore, during a geomagnetic storm, TADs originating from the auroral oval may have a strong influence on the shape of the electron density profile in the F1 region ionosphere at middle latitudes. It is highly likely that TADs are responsible for the evolution of the F1 cusp.     

单向阀三维动态流场稳定性仿真研究

对单向阀自激振动机理进行研究,采用线性分析方法提出了单向阀的临界稳定曲线。应用泵阀仿真软件PumpLinx的动网格技术,开展了单向阀三维动态流场仿真分析,数值研究了不同工作压力、不同质量流量条件下的单向阀动态稳定特性。结果表明:在某一工作压力条件下,小流量时单向阀工作不稳定,会形成周期性的阀门颤振,随着质量流量增大,单向阀动态稳定性增强;当质量流量足够大时,单向阀工作稳定,单向阀保持稳定开度工作;质量流量一定时,工作压力降低,单向阀动态稳定性增强。单向阀三维动态流场仿真结果与线性稳定性结论相一致,从三维动态流场角度验证了单向阀自激振动机理及线性稳定性分析方法的有效性。     

平方阻尼在非线性缓冲系统中的作用

本文讨论平方阻尼(以参数a表征)在图(1)所示的缓冲系统中的作用,结果表明:平方阻尼对于降低相对位移峰值d_m总有良好的效果,但不一定降低加速度峰值a_m。在一定速度冲击V下,系统的平方阻尼有两种最佳值,使a_m最小的a_(am)和使缓冲效率γ最高的a_(cm),而平方阻尼最佳条件依赖于系统的缓冲弹簧的刚度变化类型: (1)线性弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中均匀减速; (2)渐硬弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中初始和终末加速度相等即; aV~2=ω_0~2q(dm) (3)渐软弹簧情况:a_(cm)>a_(am)。 本文的基础是所谓“首程显峰”,假定即系统在速度冲击V下的响应峰值d_m和a_m出现在第一行程中。当平方阻尼值不太小,缓冲弹簧刚度特性接近反对称时,该假定成立。     

卫星490N发动机安装位置优化研究

针对490N发动机推力在卫星变轨过程中不能始终通过卫星质心,由此形成额外力矩对卫星姿态控制造成干扰的问题,文章提出了一种根据发动机推力偏斜和卫星质心位置变化情况,优化发动机安装位置的方法。此方法通过平移和旋转两种方式调整发动机的安装位置,改变推力作用点和方向,使其指向卫星质心变化范围的中心,以缩小推力相对卫星质心的偏心距,从而达到减小干扰力矩的目的。以某卫星490N发动机安装的工程实施为例,对比优化安装位置前后推力形成的干扰力矩的变化情况。结果表明:优化方法对减小干扰力矩能起到显著作用,可为工程中确定卫星变轨发动机安装位置及实施安装提供参考。     

基于特征空间变换的运载火箭Pogo模型降阶方法

针对运载火箭Pogo状态空间模型存在维数高和奇异性的问题,开展了Pogo模型的降阶方法研究。基于特征空间变换理论,导出了一般形式的Pogo状态空间模型的解耦形式。该形式与推进系统和结构系统的模态频率相对应,从而通过模态截断或保留感兴趣的模态实现有效的模型降阶。同时,还给出了降阶方法的实数运算公式。在两种不同型号推进系统的火箭Pogo问题中进行了仿真校验。结果表明所提出的降阶方法对奇异和非奇异Pogo状态空间模型都能给出正确的降阶模型,显著地提高计算效率,具有很好的通用性,为Pogo时域仿真和主动抑制提供了合适的模型。     

Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

齿轮-转子-滚动轴承传动系统的弯扭耦合振动

考虑齿轮啮合及扭转作用,建立齿轮-转子-滚动轴承传动系统的弯扭耦合非线性动力学模型.考虑输入/输出端、齿轮轴的弯曲/扭转振动等问题,推导了不平衡齿轮-转子-滚动轴承弯扭耦合的动力学微分方程.在考虑齿轮偏心和滚动轴承非线性接触特性的情况下,分析了转速、偏心量以及轴承游隙等参数对系统振动响应的影响规律.研究发现:由于弯扭耦合的作用,在主动轴中有着非常明显的从动轴转频成分.而在扭转振动中则各轴转频和啮合频率表现得更为清晰;滚动轴承有其自身的谐振频率,在系统设计阶段需要注意避开滚动轴承的变刚度频率对系统的影响;随着齿轮偏心量的变化对系统的时域和频域响应也有着很大的影响.另外,轴承游隙对系统的振动响应也有着较大影响,应选择合适的轴承游隙,以减小系统各处的振动幅值.