Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

基于锁相环的光电振荡器频率稳定化研究

通过构建小数分频锁相环,将一个工作于X波段的OEO(OptoElectronic Oscillator,光电振荡器)与OCXO(Oven-Controlled Crystal Oscillator,恒温晶体振荡器)进行锁相,得到了输出信号相位噪声和长期频率稳定度的提升。从PLL(Phase-Locked Loop,锁相环)环路传输特性出发,理论分析了PLL输出信号环路带宽内相位噪声水平和作用范围。为降低OEO整体的相位噪声,采用SIL(Self-Injection-Locking,自注入锁定)使OEO在10Hz~10kHz频偏处的相位噪声得到20dB以上的抑制。在此基础上将此SIL OEO与一个频率为100 MHz的OCXO锁相,获得了频率为9.95GHz、相位噪声为-55dBc/Hz@10Hz和-124dBc/Hz@10kHz的微波信号输出,其频率的重叠阿伦方差在100s平均时间内达到1.14×10~(-11),证明了提出的方案对提升OEO频率稳定性具有一定的实际意义。     

采用霍尔传感器的旋翼频率采集设计

为达到对旋翼飞机的控制,需要对旋翼转速进行采集.霍尔转速传感器以其高可靠性等优点常被用来测量转速.介绍了一种使用霍尔传感器进行旋翼转速采集系统,包括硬件构架,逻辑采集单元和软件设计,并给出了优化策略;通过试验数据分析,采集精度达到了预期.     

基于分频段加权的加速振动试验方法

振动环境工程研究现行采用的加速试验方法中,都只考虑了加速因子与频率无关这种情形,这不仅提高了试验设备的推力要求,也增加了位移指标要求。文章提出了一种分频段加权的加速振动试验方法,即通过对低频段加速因子的权重的优化设计,实现较小的位移指标要求,且疲劳损伤累积等效。给出了基于Dirlik方法和TB方法疲劳损伤等效的加速试验设计方法和工程实现流程。针对该方法开展了应用实例的计算,结果表明:在疲劳损伤等效的前提下,显著降低了振动台的位移,且推力基本维持不变。     

镁合金绿色高效焊接技术研究进展

镁合金是航空航天领域应用最为广泛的轻合金之一.随着镁合金应用的不断深入,对具有高精度、低能耗、高效率特征的绿色焊接技术提出了迫切需求,并成为镁合金焊接制造发展的重要方向.针对上述需求,围绕镁合金激光诱导电弧复合焊接技术,镁合金活性高效焊接技术以及镁合金与异种金属的连接技术展开系统研究.采用激光诱导电弧复合焊接技术成功实现了镁合金低能耗高效焊接制造,与传统电弧焊接相比显著提高了焊接制造效率,降低了焊接制造能耗.采用激光胶焊技术及激光-电弧复合焊接技术实现了镁合金与铝合金及镁合金和钢铁的高性能焊接制造.上述绿色焊接制造技术研究成果为实现航空镁合金轻量化结构件的设计和制造提供了有力支撑.     

带凸肩叶片的断裂故障分析

某型发动机风扇带凸肩的转子叶片发生断裂故障。断口分析表明其为疲劳裂纹特征,其疲劳源在叶盆侧凸肩工作面下侧靠近叶片前缘位置。根据微观分析结论,建立了风扇叶片三维实体模型,利用有限元方法分析了叶片的振动模态。结果表明：叶片在工作时,由于结构的激振可能发生某些阶次的共振,其应力分布与断口分析结果较一致,初步判断叶片是由于共振而发生了疲劳断裂。     

RFID技术在航空领域的应用研究

射频识别(RFID)技术现已广泛用于物流、金融、零售等各个行业.航空领域的RFID应用起步较晚,通过对RFID技术在飞机制造商、原始设备生产厂家(OEM)、航空公司的一些典型的应用案例的分析,提出RFID技术应用于航空领域所面临的挑战及必要性,为其未来航空业自动识别技术的发展指明了方向.     

低轨卫星月影事件预报优化

针对卫星月影问题,提出了一种低轨卫星优化的月影预报策略,可以有效提高目前低轨卫星在轨管理时对月影事件预报的效率.结合仿真对产生月影事件的太阳、地球、月球的三体关系进行了分析,首先给出了月影产生的解析分析方法,并通过对一个三维月影影响模型的分析,得到了月影影响区间的判定要素——月影临界角;然后进一步通过对月影临界角的分析,提出了基于太阳与白道面的位置关系和月影临界角对低轨卫星月影事件的优化预报方法;最后基于大量的随机低轨卫星场景对本方法的正确性进行了验证.研究结果表明,此方法能够较大地提高月影预报效率,可以将月影预报频率从每月1次降低到每年2次,从而简化了低轨卫星在轨运行管理的任务复杂度,为卫星的在轨可靠运行提供支持.     

Effects of synthetic jet frequency on the separated flow in a diffusing S-duct

Numerical simulations were carried out to investigate the effects of synthetic jet actuation frequency on the separated flow in a diffusing S-duct. The Reynolds number based on the entrance height was 9.78×105. At first, the numerical model was validated with experimental data, and then, the interaction between the separated flow and the synthetic jets at different frequencies was discussed. The results demonstrate that the control effect is significantly dependent on the momentum mixing enhancement between inside of the separated boundary layer and the outer flow. There exists a narrow range of actuation frequency, in which effective separation control can be achieved using synthetic jets. A dimensionless frequency F+=1.0 is identified as the optimal frequency, with a momentum coefficient of 1.62×10-3, the separation area is reduced about 46%, and the aerodynamic performance of the S-duct is also greatly improved compared to uncontrolled case. Further analysis reveals that the choice of actuation frequency is mainly determined by the momentum flux produced by a single ejection and the spacing between adjacent ejections, the optimal frequency case can be understood as a balance between the two factors. In addition, it is found that the synthetic jets can also suppress the secondary flows while decreasing the separation.