TC11钛合金的热态变形行为研究

采用等温恒应变速率压缩试验法,研究了TC11合金在780℃-1080℃和应变速率为0.001s-1~70s-1范围内的高温压缩变形行为。考察了变形温度、应变速率及变形程度对流动应力的影响关系。结果表明,流动应力对变形温度和应变速率敏感,随变形温度升高和应变速率降低流动应力减小,特别是在α β两相区变形温度对流动应力的影响显著。     

圆波导TE11/TE21双模自跟踪馈源的研究设计

圆波导TE11/TE21双模自跟踪馈源作为一种重要的自跟踪馈源,具有低插入损耗、高G/T值和全极化跟踪的优点,在测控领域得到广泛应用。在叙述了设计该馈源的理论、过程和方法的基础上,给出了一个设计实例——S频段的TE11/TE21双模自跟踪馈源,仿真和测试结果基本一致。     

固体颗粒冲蚀对钛合金ZrN涂层抗冲蚀性能的影响

采用真空电弧镀在TC11钛合金上沉积ZrN涂层,固体颗粒冲蚀实验研究不同冲蚀颗粒、冲蚀速度、冲蚀角度对涂层抗冲蚀性能的影响,并用SEM观察表面及断面形貌.结果表明,在相同冲蚀条件下,ZrN涂层冲蚀率随冲蚀颗粒硬度、冲击角度及冲蚀颗粒速度的增加而增加,冲蚀角度为90°时,ZrN涂层冲蚀速率最大,ZrN涂层提高了TC11钛合金的抗冲蚀性能.     

试验数据处理中插值问题的解决方法

本文结合试验数据处理实际需要，论述了数据处理过程中插值问题的解决方法，即样条插值法。文中给出了相应的最佳转换公式，并结合试验分析了样条插值所带来的误差，证明完全满足试验要求。     

TC11钛合金钨极氩弧焊工艺试验研究

针对TC11钛合金材料进行了自动钨极氩孤焊接工艺试验,获得了成形良好的焊缝,焊接质量符合航空Ⅰ级焊缝标准.采用金相试验方法和力学性能试验对不同焊接填充材料下的显微组织和性能进行对比.结果表明,采用TC11同质焊丝可获得与母材抗拉强度相当的焊接接头,略高于采用TA2纯钛焊丝的接头,但采用TA2焊丝时的集中塑性接近母材.     

星间链路在空间态势感知中的应用研究

通过对星间链路和空间态势感知系统国内外发展现状的分析,指出星间链路在空间信息有效获取、安全传输和实时应用以及保障空间态势感知系统战场生存能力等方面起着重要的作用.针对星间链路在未来空间态势感知系统中的应用需求,提出包含空间通信模型和空间导航模型在内的空间感知体系基本架构,并对该架构下星间链路的设计要求或者特点进行分析,指出星间链路应该具有灵活可变的星间路由策略和联网结构,并能够支持高速可变和安全可靠的星间数据传输.分别从空间网络和卫星节点2个层面提出了系统实现的关键技术,并给出部分关键技术的研究重点和研究方法.上述研究结果可以为星间链路及相关领域的研究工作提供一定的借鉴和帮助.     

AFDX交换机测试分析系统设计

AFDX网络由端系统、交换机和传输链路组成,交换机是AFDX网络的中枢构件。本文首先研究了AFDX交换机的功能和性能,在此基础上,设计了AFDX交换机测试分析系统,测试软件基于多框架、多视图、单文档,采用面向对象技术实现了交换机配置文件的处理、数据帧的捕获和解析、VL转发特征测试、技术时延测试、流量管制测试等一系列功能。最后进行了测试分析试验,试验展示了该测试分析系统对于AFDX交换机的测试效果。     

An optimal microsatellite system for optical remote sensing data management

Inter-Satellite Link represents an innovative aspect in remote sensing missions, allowing the exchange of data between satellites of a constellation according to appropriate algorithms for the minimization of the delivery time of requested data. In a recent study, the feasibility of gaining a long period of Inter-Satellite Link with an acceptable level of Bit Error Rate has been demonstrated by using a Walker Constellation composed of 20 micro-satellites located on Sun-Synchronous Orbits. In this paper, an investigation into the performance of such a constellation through the implementation of an optimal process of target access and data exchange among satellites has been carried out, together with a sizing of the onboard telecommunication system. A process analysis has been executed through the modelling of weighted fitting functions, specific for an optical remote sensing system.     

JL8飞机航炮吊舱卡链故障分析

通过对JL8飞机航炝吊舱供弹系统及弹带结构的分析,结合弹带在供弹道内的运动特性,找出了航炮吊舱卡停射故障产笺原因,并通过计算,提出了改进措施。     

Application of Contact Graph Routing in Satellite Delay Tolerant Networks

Satellite networks have many inherent advantages over terrestrial networks and have become an important part of the global network infrastructure. Routing aimed at satellite networks has become a hot and challenging research topic. Satellite networks, which are special kind of Delay Tolerant Networks (DTN), can also adopt the routing solutions of DTN. Among the many routing proposals, Contact Graph Routing (CGR) is an excellent candidate, since it is designed particularly for use in highly deterministic space networks. The applicability of CGR in satellite networks is evaluated by utilizing the space oriented DTN gateway model based on OPNET(Optimized Network Engineering Tool). Link failures are solved with neighbor discovery mechanism and route recomputation. Earth observation scenario is used in the simulations to investigate CGR’s performance. The results show that the CGR performances are better in terms of effectively utilizing satellite networks resources to calculate continuous route path and alternative route can be successfully calculated under link failures by utilizing fault tolerance scheme.