某缩尺推力室燃烧和传热特性研究

为了研究冷却剂的流动方向和推进剂的质量流量对推力室燃烧和传热过程带来的影响,以某型氢氧火箭发动机的推力室缩比试验件为研究对象,对推力室的燃烧和传热过程进行了数值仿真。改变冷却剂的流动方向,最高壁面温度相差1.04%,最高壁面热流密度相差0.544%,冷却剂温升相差0.233%,出口压力相差3.803%,分析发现,改变冷却剂的流动方向,对推力室内部的燃烧过程和壁面传热效率影响很小,冷却剂的流动方向会影响壁面温度分布。推进剂质量流量提升22.29%,室压提升22.17%,燃烧效率降低0.55%,最高壁温提升9.16%,最高热流密度提升17.48%,冷却剂温升提高13.05%,分析发现,提升推进剂质量流量会导致推力室壁面温度和冷却剂温升的提高,由于缩比发动机反应空间小燃烧不够充分,提升推进剂质量流量会使燃烧效率有所下降。     

Design for aircraft engine multi-objective controllers with switching characteristics

The aircraft engine multi-loop control system is described and the switching control theory is introduced to solve the regulating and protecting control problems in this paper. The aircraft engine multi-loop control system is firstly described and the control problems are formulated. Secondly, the theory of the smooth switching control is devoted and a new extended scheme for the smooth switching of a switched control system is introduced. Then, for the key technologies of aero-engines switching control, a design algorithm is presented which can determine which candidate controller should be put in feedback with the plant to achieve a desired performance and the procedure to design the aircraft engine multi-loop control system is detailed. The switching performance objectives and the switching scheme are given and a family of PID controllers and compensators is designed. The simulation shows that using the switching control design method can not only improve the dynamic performance of the aircraft engine control system and reduce the switching times, but also guarantee the stability in some peculiar occasions.     

星用第三代铼/铱材料490 N发动机研制进展

提高轨控发动机的真空比冲可以有效减少卫星变轨推进剂的消耗量,从而延长卫星的在轨工作寿命或增加有效载荷质量。介绍了我国在研的卫星用第三代铼/铱材料490 N发动机设计方案、技术攻关和试验情况,对工程化应用存在的问题进行了分析,并提出了改进和优化方案。在第二代490 N发动机的设计基础上,第三代490 N发动机成功攻克了可靠传热稳定工作喷注器、高性能喷注器与燃烧室匹配以及新型高温抗氧化材料制备等关键技术,真空比冲提高了10 s,达到325 s。两台发动机均通过了25 000 s鉴定级高空模拟热试车寿命考核,性能指标达到国际先进水平。但是针对试车子样数较少和铼/铱燃烧室制备工艺困难的问题,仍需进一步开展铼基体和铱涂层的高温性能研究,并继续优化发动机设计。     

NOx emissions of turbofan powered unmanned aerial vehicle for complete flight cycle

Unmanned Aerial Vehicles (UAVs) have been getting more and more popular in both civil and military arena. Similar to manned aircraft, their propulsion systems or engines emit harmful gases such as nitrogen oxides. Since UAVs have different mission profiles and operational parameters than manned aircraft, it is worthy to investigate their NO_x emissions. Therefore, in this study, NO_x emissions of a turbofan powered UAV for complete flight cycle was calculated and optimized within a range of altitude and speed parameters. NO_x emissions were calculated based on ICAO ground test data and corrected to any speed and altitude during flight legs using both Boeing Fuel Flow Method 2 and DLR Fuel Flow Method. Total NO_x emissions were calculated for complete flight cycles for different altitude and speed parameters. Numerical results were presented graphically and additionally optimization studies were conducted. Optimization studies include determination and comparison of speed and altitude for minimum NO_x emissions by the two fuel flow methods and maximum loiter time achievable by UAV.     

Numerical investigation on flow field characteristics of dual synthetic cold/hot jets using POD and DMD methods

In order to improve the control ability of synthetic jets in compressible boundary layer, a novel control method based on dual synthetic cold/hot jets coupled control of velocity profile and temperature profile was proposed. As fundamental investigations on the effects of synthetic jet temperature on the jet behavior and flow field characteristics were essentially necessary, preliminary numerical simulations were conducted to study the influence of temperature (200 K and 400 K) on the flow field characteristics of synthetic jets using Large Eddy Simulations (LES) model. Time-averaged flow fields showed that different temperatures led to variable behavior of two strands of jets. For dual synthetic cold jets, a potential-core arose apparently with its height ranging from 0.01 to 0.03 m, while for dual synthetic hot jets, two strands of jets emerged downstream. The modal decomposition of instantaneous flow fields had been done using both Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD). Various modes showed different characteristics of the flow fields. As the POD method focuses on the energy of flow while the DMD method focuses on the frequency, the first two modes had many similarities, but the third and fourth modes demonstrated completely different vortex structures. The current researches play a role of preliminary investigations for further and comprehensive exploration of novel flow control measures in global velocity field.     

多发涡扇飞机拍频噪声抑制原理及应用

多发涡扇民用飞机在巡航飞行阶段,客舱区域容易受到拍频噪声的影响。为研究抑制拍频噪声的飞机设计方法,采用管道声学理论对大涵道比涡扇发动机进行拍频噪声建模,明确了拍频噪声主要来源于风扇叶片通过频率的单音及其谐波。应用声波线性叠加原理,分别分析了双发、四发飞机拍频噪声产生的机理,得出抑制拍频噪声的方法是使所有发动机的物理转速一致。在研究四发飞机拍频噪声抑制过程中,推导了频率相近幅值不同单音声波干涉的计算公式,为三发等其他多发飞机的拍频噪声抑制设计提供了参考。为了促进该项技术的工程应用,研究了波音787飞机通过推力管理功能实现拍频噪声抑制的方法,设计了拍频噪声抑制控制律,并对拍频噪声调频的上限和下限进行分析,给出了相应的建议值。飞机系统在向发动机电子控制器(Engine electronic controller,EEC)提供N1转速同步修正量时,应选择发动机控制所用的目标转速进行比较,EEC则以叠加N1转速同步修正量的目标转速进行发动机控制。     

变循环压缩系统涵道流动计算模型及模式转换倒流判据研究

为了研究双外涵变循环压缩系统的涵道流动匹配规律，发展了涵道流动的计算模型，对压缩系统模式转换过程中外涵道倒流问题的发生机理和影响因素进行了深入分析，总结了压缩系统的倒流判断准则，并基于简化计算模型和全三维计算结果对倒流判据进行了验证。研究结果表明，对于一定的压缩系统匹配状态，存在一个决定涵道匹配状态的临界核心机驱动风扇级(Core Driven Fan Stage, CDFS)总压比，当CDFS的实际工作压比高于临界压比时，压缩系统第二外涵道将发生倒流，反之则系统不倒流。复杂涵道系统内的流动损失和堵塞等特性对临界CDFS总压比有显著影响，为了准确判断压缩系统的匹配状态，需要对其进行精确模化。基于简化模型得到的压缩系统倒流临界线可以推广至全三维状态，本文提出的倒流判别准则具有较高的可靠性和可行性。     

固体火箭冲压发动机技术研究进展

近年来,固体火箭冲压发动机获得飞快发展,本文综述了其技术研究进展,为后续固体火箭冲压发动机技术及相似技术的发展提供借鉴。主要介绍了固体火箭冲压发动机的燃气流量调节技术、贫氧推进剂技术、高效燃烧组织技术、转级技术等关键技术。总结发现国内外关键技术已取得了较全面突破,逐渐进入工程实用阶段,但燃烧基础问题研究不足。因此,有必要进一步深入开展推进剂细观燃烧、多相湍流燃烧、金属颗粒燃烧等基础科学研究,进而促进固体火箭冲压发动机技术发展。     

浅谈机队发动机换发计划管理

航空公司机队发动机换发计划管理是发动机工程管理的有机组成部分，换发计划管理需要细致考量影响的因素，并结合实际进行优化调整。     

基于功率裕度的某型发动机全寿命性能研究

随着使用时间不断增加,研究飞行队所有选装ARRIEL2S系列发动机全寿命性能变化趋势的必要性突显.针对SRRIEL2S系列发动机全寿命性能参数变化特点,提出使用基于可几误差舍弃理论处理发动机功率校验数据,分区间描绘该系发动机全寿命性能指标变化趋势,给出该系发动机全寿命性能特点,为机务工程人员监控该系发动机提供有利依据；提出延长功率校验间隔的假设,并在理论上做了充分论证,为节约该系发动机运行成本提供一个明确及可行的方向.