膨胀效应对激波/湍流边界层干扰的影响

采用直接数值模拟方法对来流马赫数2.9,30°激波角的入射激波与膨胀角湍流边界层干扰问题进行了数值研究。入射激波在壁面上的名义入射点固定在膨胀角角点,膨胀角角度分别取为0°、2°、5°和10°。通过改变膨胀角角度,考察了膨胀效应对干扰区内复杂流动现象的影响规律和作用机制,如分离泡、物面压力脉动特性、膨胀区湍流边界层和物面剪切应力脉动场等。研究发现,膨胀角角度的增大使得分离区流向长度和法向高度急剧降低,尤其是在强膨胀效应下分离泡形态呈现整体往下游偏移的双峰结构。物面压力脉动功率谱结果表明,膨胀角为2°和5°时,分离激波的非定常运动仍表征为大尺度低频振荡,而膨胀角为10°,强膨胀效应极大地抑制了分离激波的低频振荡,加速了下游再附边界层物面压力脉动的恢复过程。膨胀区湍流边界层雷诺剪切应力各象限事件贡献和出现概率呈现逐步恢复到上游湍流边界层的趋势,Görtler-like流向涡结构展向和法向尺度变化剧烈,同时在近壁区将诱导生成大量小尺度流向涡。此外,物面剪切应力脉动场的本征正交分解分析指出,膨胀效应的影响体现在低阶模态能量的急剧降低从而使得高阶模态的总体贡献相对升高。     

Fluid structure interaction simulation of supersonic parachute inflation by an interface tracking method

An Arbitrary Lagrangian–Eulerian (ALE) approach with interface tracking is developed in this paper to simulate the supersonic parachute inflation. A two-way interaction between a nonlinear finite element method and a finite volume method is accomplished. In order to apply this interface tracking method to problems with instantaneous large deformation and self-contact, a new virtual structure contact method is proposed to leave room for the body-fitted mesh between the contact structural surfaces. In addition, the breakpoint due to the fluid mesh with negative volume is losslessly restarted by the conservative interpolation method. Based on this method, fluid and structural dynamic behaviors of a highly folded disk-gap-band parachute are obtained. Numerical results such as maximum Root Mean Square (RMS) drag, general canopy shape and the smallest canopy projected areas in the terminal descent state are in accordance with the wind tunnel test results. This analysis reveals the inflation law of the disk-gap-band parachute and provides a new numerical method for supersonic parachute design.     

基于多Agent的机群编队导航系统设计与研究

智能化建模在装备作战仿真领域中独居优势.将多Agent技术程序设计方法引入机群编队导航系统的设计中,对模型进行了顶层设计并分析了Agent子系统之间的信息交互过程,为机群编队导航系统的研发和设计提供了新的思路.     

水气动量交换的实验研究

在风浪槽中进行水气动量交换实验，测量了不同风速和风区下的波浪及空气湍流流场。测量数据表明水面上风速分布符合对数律，水气界面附近在小范围的动量交换常通量层。阻力系数ＣＤ随风速增加线性增长，随波龄增加而减小。这一趋向与理论分析及外海帝测结果一致。对风浪发展过程中波浪和空气湍流谱结构的分析证明了水气运动的耦合关系。     

中国核电厂操作员反应时认知模型的应用(英文)

讨论了一些有关人员行为与时间有依赖关系的可靠性模型；给出了中国核电厂操作员在清华大学培训模型机上的一些可靠性实验结果。此外，还根据已获得的实验数据计算了在ＡＴＷＳ事故条件下人的失误概率。     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

某圆周缝型救生伞的充气性能研究

为获得新型圆周缝结构救生伞的充气性能,文章采用任意拉格朗日欧拉流固耦合方法对该救生伞进行了充气过程的数值模拟,用空投试验结果验证了该数值方法的可行性。数值结果得到了绕伞衣流场、伞衣外形、运动的动态信息,对数值结果的分析发现初始充气阶段后期流场对上部伞衣影响很大,为充气过程中上部伞衣的控制提供了依据,但是初始充气期救生伞的摆动角度小于充满期。对于结构透气量不对称设计的伞衣,不对称充气是绝对的,圆周缝会首先在结构透气量少的部位张开。结果表明,对不同的圆周缝节点设计不同的开缝力将有助于保持良好的对称充气状态,改变开缝力的设计参数将会改变圆周缝的开缝时间及圆周缝完全张开所需的时长,将达到更好的减载效果。研究结果对圆周缝型降落伞的优化设计有一定的参考作用。     

220GHz返波振荡器高频特性及互作用研究

文章对220GHz折叠波导慢波电路的返波传输特性进行了研究。介绍了返波振荡器的工作原理,结合模拟仿真和理论分析,针对220GHz的返波振荡器,研究各个参数对冷特性的影响。对220GHz返波振荡器的高频结构进行了初步设计,给出了结构参数以及相应的模拟结果。结果表明在不考虑损耗的情况下,设计的结构可以在中心频率220GHz处获得约为0．5W的功率,可调谐范围是30GHz,调谐电压范围为5．5kV-12kV。     

几种常用格式和湍流模型在高速流动中的适用性研究

针对高超声速飞行器中存在的强激波、激波/边界层干扰、分离、湍流等复杂流动现象,对比分析了当前计算流体力学中的主要空间离散格式及湍流模型,发现不同格式对强激波的分辨率基本相同,Roe和LDE(low diffusion E-CUSP(convective upwind split pressure))格式对摩擦因数和传热系数的模拟优于其他格式;S-A(Spalart-Allmaras)一方程湍流模型计算的摩擦因数比k-ωSST(shear stress transport)两方程湍流模型高10%左右,而后者预测的分离区约为前者的2倍,且分离点靠前.     

钛合金熔模精铸氧化锆陶瓷型壳／金属界面反应研究

通过实际浇注和真空扩散连接分别制取了钛／型壳界面，借助ＳＥＭ、ＥＰＭＡ和显微硬度仪等分析测试手段对所得界面进行了深入研究，初步提出了以Ｚｒ、Ｏ元素向钛基体内的扩散为主导的界面反应机制。实验结果表明，界面反应并非在整个界面上均衡推进，而是在浓度、温度、能量起伏、以及陶瓷颗粒位向适宜的区域优先发生界面反应