热变形对TC4氩弧拼焊板拉伸与疲劳性能的影响

在700℃下,对TC4氩弧拼焊板进行了3个变形量(主应变0.5％、1.6％、2.7％)的等双向拉伸成形,研究了热变形对TC4氩弧拼焊板单向拉伸性能和疲劳寿命的影响.结果表明:等双拉变形前后,TC4氩弧拼焊板拉伸试样均断裂在焊接热影响区,热影响区的强度低于母材和焊缝.随着等双拉热变形量增加,TC4拼焊板试样疲劳寿命有所增加,这是因为一定变形量的热成形释放了焊接残余应力.     

热等静压工艺制备的Ti-6Al-4V薄壁筒的切削加工

为了能够提高钛合金薄壁筒的加工效率,利用热等静压工艺制备了两个具有不同结构的Ti-6Al-4V薄壁筒,研究了夹具、填充泥浆和筒结构对Ti-6Al-4V薄壁筒的外圆表面粗糙度和精度的影响。结果显示,Ti-6Al-4V热等静压薄壁筒经过切削加工能够达到精度要求,填充泥浆降低了弹性回弹,提高了薄壁筒外圆精度;筒结构的内圆环和粗大端能够提高刚度,有效降低了外圆表面粗糙度值;夹具尺寸误差对圆度和同轴度影响较大,较大的尺寸误差显著降低了筒的外圆精度。     

Corrosion mechanism investigation of TiN/Ti coating and TC4 alloy for aircraft compressor application

It is imperative to develop multifunctional erosion and corrosion resistant coatings for compressor blades of aircraft engines in harsh environment. PVD (Physical Vapor Deposition) technology has the advances in processing erosion-resistant coatings; however, the performance of PVD coatings to combat corrosion depends on various coating defects. Determining and comparing the corrosion performances of PVD TiN/Ti coating and uncoated TC4 alloy was the main objective of present work. The 960 h salt spray corrosion and 116 h hot corrosion tests were conducted to simulate the grounding and working environments of the aircraft compressors. The corrosion mechanisms due to the coating defects such as pinhole, columnar boundary and large grain were analyzed based on the OM, Confocal microscope, electrochemical measurements, SEM, XRD and EDS results. Owing to the disordered state associated with the columnar boundary and the coating defect, nitrogen could be easily replaced by oxygen in the hot corrosion process, these structures were channels for fast diffusion of oxygen. Moreover, the Gibbs energy changes of Ti oxidation and TiN oxidation were thermodynamically calculated according to the working condition of aircraft compressors, and considerable research effort was focused on mapping out the phase diagram of Ti, TiN and high pressure gases. The findings of this research can provide insights into developing multifunctional coatings for future aircraft engines.     

疲劳开裂结构等效分析谱构造方法

为了解决外场疲劳裂纹排故中结构疲劳载荷谱数据不全或过于复杂的问题,提出了一种适用于飞机外场疲劳开裂结构的等效分析谱构造方法。该方法以细节疲劳额定值(DFR)法和结构细节有限元分析为基础,构建地—空—地最大应力与结构疲劳寿命的变化曲线,进而通过寿命反推,获取适用的地—空—地损伤比,以此构建等效分析谱,谱型为等幅谱。通过应用实例,将该方法构造的载荷谱与实测谱进行了对比,确认了该方法的正确性和有效性。     

提高机载电子产品的可靠性——某告警系统的故障分析

介绍电子产品设计时元器件选用对系统可靠性的影响。结合实际案例,总结并强调在电子产品设计时的元器件选用应从质量等级入手,充分进行降额设计和热设计。阐明合理选用元器件是实现电子产品系统设计高可靠性水平的基础。     

Atmospheric response to a Hot SST Event in November 2006 as observed by the AIRS instrument

Using Atmospheric Infrared Sounder (AIRS) products of atmospheric temperature and geopotential height, we investigate the atmospheric response to HE0611, which was found and investigated by [Qin, H., Kawamura, H., Sakaida, F., Ando, K. A case study of the tropical Hot Event in November 2006 (HE0611) using a geostationary meteorological satellite and the TAO/TRITON mooring array. J. Geophys. Res. 113, C08045, doi: 10.1029/2007JC004640, 2008]. HE0611 was formed by connecting two very high SST areas, HE0611-East and HE0611-West. The period-mean atmosphere temperatures at levels of 925 and 850 hPa in HE0611-West are higher, by about 0.5 K, than those in WE0611-East while the atmospheric temperatures at middle to high levels (700–300 hPa) are higher in HE0611-East. The period-mean geopotential heights HE0611-East are much lower than those in HE0611-West for the levels from the surface to 400 hPa. The mean geopotential heights from 400 hPa to 200 hPa are higher in HE0611-East. In the middle and high layers over HE0611-West, the atmosphere temperatures gradually decrease from 7th to 17th, and then increase significantly. The increase in HE0611-East starts from 15th November, which is earlier than that of HE0611-West. The geopotential heights in the high layer of both the areas also show corresponding behaviors. The lagged atmospheric response in the western part is confirmed by the correlation analysis. It emerges that the atmospheric response to HE0611 is well organized and associated with deep convention in HE0611-East and subsidence in HE0611-West. These are also consistent with the HE0611 features and evolution revealed by earlier HE studies.     

Effect of wall suction on leading edge contamination

This paper is devoted to an experimental study of swept wing leading edge contamination by the turbulence emanating from the wing-wall junction. The main objective is to delay the contamination onset by applying surface suction along the attachment line. Two series of experiments are described; the first one was performed in a small wind tunnel at CERT ONERA, the second one was carried out in the F2 wind tunnel at Le Fauga Mauzac centre. Hot film measurements showed that leading edge contamination could be delayed up to very large Reynolds numbers. We also studied the behaviour of the relaminarized boundary layer downstream of the sucked region, along the span as well as in the chordwise direction.     

发动机喷流对飞行器底部流动影响数值模拟

针对发动机燃气喷流对底部流动的影响开展研究。建立冷喷与热喷计算方法，与经典的高压空气尾喷管喷流试验数据进行了对比，验证了本文建立的三维喷流方法的可靠性。对本文选用的飞行器外形采用冷喷与热喷方法开展了对比计算并与飞行试验值进行比较，分析了两种方法结果的差异。采用热喷方法对来流马赫数 2.5 ，不同飞行高度及喷管进口总压开展计算，研究飞行高度及喷管进口总压对发动机喷流及底部流场的影响。结果表明，保持飞行高度、来流马赫数不变，喷管进口总压增加，底部压力系数逐渐提高。燃气质量浓度最大值位于底部空腔的壁面处，且保持一个恒定值。保持喷管进口总压、来流马赫数不变，飞行高度增加，喷流高速区向后移动且中心区最大马赫数增加。在一定飞行高度下，底部压力系数由负转正，即飞行器底部会出现正推力，这对飞行器的射程会产生重要影响，需要提前评估。     

热等静压对激光选区熔化成形GH4169合金持久性能的影响

采用激光选区熔化(SLM)成形技术制备了GH4169合金,运用金相显微镜(OM)、扫描电子显微镜(SEM)、电子背散射衍射(EBSD)和透射电镜(TEM)等分析手段分析了热等静压对SLM成形GH4169合金组织及持久性能的影响规律。结果表明:沉积态合金组织中,沿沉积方向的晶粒为柱状晶,晶粒内枝晶组织细小,枝晶间分布大量Laves相;热等静压处理可有效消除组织中气孔缺陷,溶解大部分Laves相,促使组织晶粒等轴化,并减少后续980℃固溶处理过程中δ相在晶内的析出;热等静压处理能提高合金的持久寿命,但会降低合金的持久塑性。     

防热结构的局部防热研究

对回收式返回器的分析结果表明,表面的突起物是防热结构局部过热的重要起因。分析了防热结构的局部过热现象,提出了一种局部防热结构设计分析方法。分析计算结果与地面试验和飞行结果进行了分析比较。