民用客机增升装置气动噪声研究进展

随着民用飞机数量的快速增加,航空噪声问题日益引起世界范围的关注。增升装置作为重要的机体噪声源之一以其流动复杂性和声源多样性成为民用航空气动声学的难点之一,欧美各国为此开展了大量的研究。总结了增升装置气动噪声的产生机理以及控制措施的研究现状,在此基础上还特别关注了目前工业部门气动与声学的设计思想及需求。     

Identifying areas of high economic-potential copper mineralization using ASTER data in the Urumieh–Dokhtar Volcanic Belt,Iran

This study investigates the application of spectral image processing methods to ASTER data for mapping hydrothermal alteration zones associated with porphyry copper mineralization and related host rock. The study area is located in the southeastern segment of the Urumieh–Dokhtar Volcanic Belt of Iran. This area has been selected because it is a potential zone for exploration of new porphyry copper deposits. Spectral transform approaches, namely principal component analysis, band ratio and minimum noise fraction were used for mapping hydrothermally altered rocks and lithological units at regional scale. Spectral mapping methods, including spectral angle mapper, linear spectral unmixing, matched filtering and mixture tuned matched filtering were applied to differentiate hydrothermal alteration zones associated with porphyry copper mineralization such as phyllic, argillic and propylitic mineral assemblages.     

高温吸波材料研究新进展与趋势

对最近报道的耐温>1 000℃的高温吸波材料进行了回顾,主要介绍了碳和陶瓷类无机耐高温吸波材料;同时对在纳米技术、静电纺丝技术等研究中报道的新型耐高温材料应用为电磁吸收材料进行了展望。     

非接触高温测量技术发展与现状

非接触高温测量技术已经成为2 000℃以上高温目标温度测量的主要手段,其发展水平直接制约着国防科技工业尤其是高速飞行器热防护及隐身性能等关键技术领域的发展。本文综述了当前各类非接触高温测量技术的研究现状、技术优缺点及应用前景,并对未来非接触高温测量技术的发展进行了展望。     

基于数值微分方法的卫星陀螺故障诊断(英文)

提出一种基于数值微分的卫星陀螺故障诊断方法。通过引入代数可观测的概念,将故障诊断问题转化为求解数值微分问题。并根据卫星姿态运动学方程证明了陀螺故障的代数可观性。然后通过高增益观测器的方法来近似姿态敏感器测量输出的数值导数,并利用李雅普诺夫理论分析和设计高增益观测器。基于陀螺故障的代数可观性和星敏感器测量输出的数值微分,可以直接得到陀螺组件的故障估计值。最后,通过突变、缓变和并发故障等仿真算例验证了算法的有效性,仿真结果表明所提出的方法不仅可以检测故障的发生,而且能够估计故障幅值。     

Aerial-BiSeNet: A real-time semantic segmentation network for high resolution aerial imagery

The aircraft system has recently gained its reputation as a reliable and efficient tool for sensing and parsing aerial scenes. However, accurate and fast semantic segmentation of high-resolution aerial images for remote sensing applications is still facing three challenges: the requirements for limited processing resources and low-latency operations based on aerial platforms, the balance between high accuracy and real-time efficiency for model performance, and the confusing objects with large intra-class variations and small inter-class differences in high-resolution aerial images. To address these issues, a lightweight and dual-path deep convolutional architecture, namely Aerial Bilateral Segmentation Network (Aerial-BiSeNet), is proposed to perform real-time segmentation on high-resolution aerial images with favorable accuracy. Specifically, inspired by the receptive field concept in human visual systems, Receptive Field Module (RFM) is proposed to encode rich multi-scale contextual information. Based on channel attention mechanism, two novel modules, called Feature Attention Module (FAM) and Channel Attention based Feature Fusion Module (CAFFM) respectively, are proposed to refine and combine features effectively to boost the model performance. Aerial-BiSeNet is evaluated on the Potsdam and Vaihingen datasets, where leading performance is reported compared with other state-of-the-art models, in terms of both accuracy and efficiency.     

同位素热源高温-冲击复合环境试验

为了考察深空探测器同位素热源模拟样品在高温–冲击复合环境下的环境可靠性,研制了一套高温–冲击复合环境试验装置。该装置由温度加载系统、冲击试验系统、带有热防护功能的夹具和控制系统等组成。该装置可完成室温约500℃热载荷加载。利用该试验装置对同位素热源模拟样品进行了500℃、5 000次的高温–冲击复合环境试验考核,获得了产品温升响应曲线、冲击波形图等相关试验信息。试验结果表明该试验装置能够进行高温–冲击复合环境试验。     

MA 及原位-热压合成TiC/ Ti5 Si3 复合材料

以Ti粉、Si粉和C粉为原料,利用高能球磨及热压工艺合成了TiC/Ti5Si3陶瓷复合材料。研究了工艺条件尤其是热压温度对合成产物相组成及微观结构的影响,并结合DSC、XRD和SEM对反应合成机理进行探讨。结果表明:通过优化合成工艺,高能球磨12 h,热压温度1 400℃时,烧结6 h得到了高纯度的TiC/Ti5Si3陶瓷复合材料;合成过程为:反应开始时发生Ti+C■TiC,反应ΔG=-167.72 kJ/mol。2 h时发生5TiC+8Si■Ti5Si3+5SiC,反应ΔG=-62.12 kJ/mol,当6 h时发生3SiC+8Ti■Ti5Si3+3TiC,反应ΔG=-697.8 kJ/mol。显微结构表明:TiC/Ti5Si3复合材料的合成过程伴随Si熔融,该材料以TiC-Si-Ti5Si3形式相结合,其中Si为黏结剂。     

基于IMU辅助的高动态GPS信号捕获算法

高动态环境存在较大的多普勒频移,传统的GPS信号捕获方法捕获时间较长。为了快速捕获到信号,提出将惯性测量单元(InertialMeasurementUnit,IMU)辅助与快速傅里叶变换(FFT)相结合的快速捕获算法。该算法通过外部IMU的位置、速度辅助,预先估算高动态载体产生的多普勒频移,缩小频率搜索范围;利用二维FFT方法同时搜索码相位和多普勒频率,降低计算复杂度,加快捕获速度。仿真结果表明该算法可以显著减少捕获时间,提高捕获性能。     

高压比离心叶轮自循环机匣处理扩稳研究

为了探索自循环机匣处理扩稳机理,利用全三维数值模拟方法对应用自循环上游槽封闭机匣和自循环机匣处理结构两种情况下的Krain高压比离心叶轮进行了详细研究.对比结果表明:自循环机匣处理能有效的延迟失速的发生并在近失速区域略微提高压气机的效率以及总压比.通过详细的流场分析表明:该机匣处理能有效地减小叶顶栽荷,从而降低泄漏流相对速度,抑制间隙泄漏涡在叶顶通道内的发展以减小低速气流在流道内的阻塞,提高转子通道的通流能力,从而达到扩大稳定工作范围的目的.