基于载荷当量安装误差的面齿轮振动特性

以面齿轮传动系统为研究对象,考虑载荷作用下面齿轮传动系统中支撑结构变形和轮齿弹性变形,通过将传动系统变形等效到面齿轮和直齿轮安装误差方向,建立包含当量安装误差的面齿轮多自由度耦合振动分析模型;采用4阶Runge-Kutta法求解了面齿轮传动系统运动微分方程,得到了当量安装误差对面齿轮振动加速度和法向动态啮合力的影响;开展了面齿轮动态特性测试试验,试验结果表明:偏置距误差和轴交角误差引起的面齿轮沿x方向振动加速度大于沿z方向振动加速度;偏置距误差对面齿轮x方向振动加速度的影响大于轴交角误差。      

激励频段对航天器随机振动载荷的影响

在航天器随机振动等效准静态载荷计算中,高频因对随机振动载荷的贡献较小而可以被截去,但目前截止频率的选择还未有完全确定。为确定随机振动环境下的计算频段,文章设计了不同动态特性的组件进行不同截止频率的随机振动试验,并根据试验数据分析研究了不同特性组件在不同振动频段下应变的变化规律。研究结果认为,对于一般组件,随机振动的计算截止频率可取为组件主频率的1.5倍。针对非均匀输入加速度谱的随机振动载荷计算问题,文章提出分频段的分析方法。按3个基本频段计算随机振动载荷,分析得到了不同频段对总随机振动载荷贡献大小和规律,以及截止频率误差的影响因素和影响大小。算例表明,分频段法可以用于不同状态输入加速度谱的随机振动载荷计算。     

Time delay compensation in lateral-directional flight control systems at high angles of attack

The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack. In this investigation, the effects of time delay on the lateral-directional stability augmentation system in high-α regime are discussed based on the $\dot{\beta }$ model, which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateral-directional unsteady aerodynamic characteristics at high angles of attack. Both the $\dot{\beta }$ model and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-α maneuvers. The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay. Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based on $\dot{\beta }$ model are designed to address the time delay in different maneuvers. The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack. Finally, the gain-prediction compensator is combined with a linearized $\dot{\beta }$ model reference adaptive controller to compensate the adverse effects of very large time delay, which exhibits excellent performance when addressing the extreme conditions at high angles of attack.     

高精度高动态星模拟器研究

给出了高精度高动态星模拟器系统组成和总体结构, 提出一种基于亚像素显示技术提高动态星模拟器星点位置显示精度从而减小星点几何中心与能量中心位置偏差的新方法. 针对动态星模拟器高动态性要求, 提出一种快速精确检索全天球导航星的新方法, 将已知SAO (Smithsonian Astrophysical Observatory) 星表进行分区, 计算当前姿态四元数并分析航天器视轴所在区域, 对于距离视轴较远区域停止搜索和匹配, 很大程度上缩小了导航星搜索范围, 进而缩短了全天球恒星遍历所需时间. 软件测试结果表明, 此快速检索法可使全天球导航星的选取速度提高近10倍.      

FY-3A卫星星内辐射剂量评估与分析

对FY-3A卫星近四年的辐射剂量数据进行分析,结果表明,在1 mm铝的等效屏蔽厚度下,星内辐射剂量存在显著的方向性差异,+Y向剂量增长变化显著大于+Z向.深入分析剂量变化与带电粒子辐射关系后发现,太阳质子事件期间的高能质子增长不会对辐射剂量增长变化产生显著影响;而高能电子是剂量增长变化的主要贡献者,其中扰动导致的高能电子通量强增长是使得辐射剂量显著增加的主要原因,并显著影响到卫星+Y向.进一步与工程常用SPENVIS剂量计算结果的对比表明,实测能更好地反映剂量动态变化和方向差异.综上,实测剂量数据对于同类工程星内器件的合理布局和工程防护设计具有一定指导和参考价值.     

辐射带高能电子通量波动与地磁暴警报

地球磁场捕获带电粒子形成辐射带,地磁场的扰动将导致带电粒子通量的变化.根据磁暴期间外辐射带高能电子通量起伏和波动的特点及规律,利用GOES卫星实时发布的5min分辨率高能电子微分通量数据,构建了高能电子通量波动指数,并分析了该指数与地磁活动的关系.结果表明,所提出的高能电子通量波动指数与地磁事件有很好的相关性,能起到地磁暴发生的指示剂作用,相对于目前空间环境业务化预报过程中广泛使用的3hKp指数,高能电子通量波动指数能更早地警报地磁暴的发生,是潜在有效的地磁暴警报辅助手段,能为空间环境预报中的地磁暴实时警报提供重要参考.      

一种融合MRF分割与数学形态学的道路提取算法

针对高分辨率合成孔径雷达（Synthetic Aperture Radar, SAR）图像中道路目标难以有效提取的问题,提出一种融合马尔可夫随机场（Markov Random Field, MRF）分割与数学形态学处理的高分辨率SAR图像道路提取算法。该算法首先利用直方图均衡化和增强Lee滤波对SAR图像进行预处理,实现道路的边缘增强,抑制相干斑噪声;进而利用基于条件迭代模式（Iterated Conditional Mode, ICM）的MRF对SAR图像中的道路目标进行初分割;再用数学形态学填充空洞,平滑道路边缘;最后,基于道路的几何特征,使用偏心率、矩阵度、复杂度等因子去除虚警,从而提取出道路目标。利用该文算法对两块实际高分辨率SAR图像进行道路目标提取,均可以取得90%以上的正确道路提取率,表明本文算法具有较高的道路提取精度。     

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.     

磁悬浮飞轮用新型异极性永磁偏置径向磁轴承

为满足应用于航天器姿控、储能的磁悬浮飞轮采用的扁平构型或高转速转子需求,提出了一种新型异极性永磁偏置径向磁轴承,具有轴向长度短、结构紧凑的优点,有利于扁平转子或高速转子的磁悬浮控制。在新型径向磁轴承磁路分析的基础上,通过应用于50 Nms反作用飞轮的设计实例,经仿真分析,校验了新型径向磁轴承的基本性能;并与传统同极性永磁偏置径向磁轴承进行了比较,验证了新型径向磁轴承的优点。     

电磁监测试验卫星矢量磁场探测方法

电磁监测试验卫星是中国第一颗近地轨道电磁场科学探测试验卫星, 探测空间背景磁场是其重要任务之一. 空间背景磁场探测需要在卫星平台上对空间矢量磁场进行长期稳定准确探测, 电磁监测试验卫星采用磁通门磁强计和基于CPT效应的绝对磁场校准装置(Coupled Dark State Magnetometer, CDSM)分别探测空间相对矢量磁场以及绝对标量磁场, 通过数据处理, 使最终的矢量磁场探测数据具有准确性. 这种数据处理方法在理想模型下拥有解析解, 实施过程中载荷的噪声、 准确度及稳定性影响模型的准确性, 会产生数据校准误差. 通过对在轨磁场探测的模拟确定了这种数据处理方法的性能, 验证了在载荷设计性能的基础上电磁监测试验卫星的磁场探测可以实现1 nT的准确度.