Robust model predictive control for satellite formation keeping with eccentricity/inclination vector separation

This study presents model predictive formation control based on an eccentricity/inclination vector separation strategy. Alternative collision avoidance can be accomplished by using eccentricity/inclination vectors and adding a simple goal function term for optimization process. Real-time control is also achievable with model predictive controller based on convex formulation. Constraint-tightening approach is address as well improve robustness of the controller, and simulation results are presented to verify performance enhancement for the proposed approach.     

基于室内无线模型的穿墙损耗校正

K-M（Keenan-Motley）模型将单墙固定损耗值相加来计算室内无线信号穿透多墙的总损耗值，存在较大误差。针对该问题选取多种室内场景分别进行连续波（Continuous Wave，CW）测试，对无线信号穿墙损耗的影响因素和变化规律进行分析，提出了一种基于人工神经网络的室内无线模型穿墙损耗校正方法，对预处理后的测试数据进行训练并建立预测模型。经验证该预测模型符合校正判别准则，在实际场景下具有良好的预测准确度。     

Predictive fault-tolerant control of an all-thruster satellite in 6-DOF motion via neural network model updating

The problem of controlling an all-thruster spacecraft in the coupled translational-rotational motion in presence of actuators fault and/or failure is investigated in this paper. The nonlinear model predictive control approach is used because of its ability to predict the future behavior of the system. The fault/failure of the thrusters changes the mapping between the commanded forces to the thrusters and actual force/torque generated by the thruster system. Thus, the basic six degree-of-freedom kinetic equations are separated from this mapping and a set of neural networks are trained off-line to learn the kinetic equations. Then, two neural networks are attached to these trained networks in order to learn the thruster commands to force/torque mappings on-line. Different off-nominal conditions are modeled so that neural networks can detect any failure and fault, including scale factor and misalignment of thrusters. A simple model of the spacecraft relative motion is used in MPC to decrease the computational burden. However, a precise model by the means of orbit propagation including different types of perturbation is utilized to evaluate the usefulness of the proposed approach in actual conditions. The numerical simulation shows that this method can successfully control the all-thruster spacecraft with ON-OFF thrusters in different combinations of thruster fault and/or failure.     

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley's design principles has been optimized to the architecture's limit, which can hardly satisfy the further requirements on green aviation. By past decades' investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.     

基于新陈代谢GM（1,1）模型的导弹遥测故障预测算法

在人工监视遥测关键参数是否超出阈值范围以判断导弹故障的传统模式基础上,对GM（1,1）预测模型进行了改进,研究了基于新陈代谢的GM（1,1）预测算法对遥测参数实时预测效果.该算法能不断去掉最老的信息,充分利用最新的信息,避免了预测模型老化的现象;由于用于预测的数列维度较少,便于计算,能够保证算法的实时性.用MATLAB编程实现算法,比对实测数据的预测值与实际值,并进行误差分析.结果表明,该算法对遥测参数的预测精度较高,可为及时发现导弹故障提供科学的依据.     

2.5维编织树脂基复合材料平板多尺度动力学模型修正

在2.5维编织树脂基复合材料多尺度固有振动分析的基础上,开展基于实测结构模态数据的复合材料平板动力学模型修正研究,以获取精准反映其动力学特性的模型。首先,建立复合材料平板固有频率对弹性参数的灵敏度分析方法,分析了平板固有振动特性的主要影响因素;其次,建立基于灵敏度分析的复合材料多尺度动力学模型修正方法,形成了基于MSC.NASTRAN平台的模型修正程序。最后,利用实测结构模态测试数据,实现对复合材料平板动力学模型的修正。结果表明,对关键弹性参数进行修正后,不同边界条件和纱线走向的复合材料平板试验件固有频率实测数据与仿真数据的最大误差由10.44%下降至2.39%,相关性得到了大幅改善。此外,所提出的自由模态测试方案结合动力学模型修正方法,为复合材料等效弹性参数的试验辨识提供了新的技术途径。     

基于控制分配的恒压腔压力精准控制

针对采用双阀调节的恒压腔系统压力在空气流量大范围变化时的精确控制问题,提出了一种基于控制分配的恒压腔压力精准控制方法。首先,建立了虚拟放气流量的双阀控制分配算法,包括：建立满足虚拟放气流量要求且调节阀能耗最小的优化问题;通过线性矩阵不等式(Linear Matrix Inequality, LMI)求解该优化问题得到双阀实际流通面积值;考虑调节阀动态并计算调节阀控制信号指令值。其次,建立以虚拟放气流量为恒压腔控制输入的闭环负反馈回路,基于此,设计满足伺服性能和抗干扰性能要求的PI控制器,引入上述双阀控制分配算法,进而构建完整的基于控制分配的恒压腔压力控制系统。仿真结果表明,采用该方法的控制系统性能明显优于传统单阀PI控制系统性能,恒压腔压力动态相对误差小于0.07%;干扰流量最大变化率为77kg/s2时,压力最大偏差低于500Pa;此外,调节阀动态时间常数和流量系数的拉偏仿真结果进一步验证了该控制器的鲁棒性。     

铝合金锻件重复淬火保温时间对组织性能的影响

分析了铝合金锻件重复淬火保温时间的长短及其组织性能的影响情况。根据大量的试验数据,证实了重复淬火保温时间及时效保温时间的长短对锻件性能的直接影响,并以此确定了合理的工艺参数。     

燃气轮机转子动力特性分析的旋转对称有限元模型

本文给出了燃气轮机转子临界转速和不平衡响应计算分析的旋转对称有限元模型,付立叶级数的引入可以使得三维转子只在一个基础扇区上使用三维单元建立有限元模型。与梁单元相比,实体单元能准确描述转子的几何形状。文中给出了一个验证性算例和一个工程实例。      

柔性航天器的动力学建模问题

首先简单介绍了关于柔性航天器动力学建模的一些综述论文,指出了柔性航天器动力学建模的困难所在。然后,分别对柔性体变形运动的描述模型,浮动参考架的选择、动力学方程的建立和模型降阶等问题进行了探讨。