J2轨道模型对月地激光通信预瞄准精度影响研究

基于J_2轨道预测模型,设计了不同倾角和轨道高度圆轨道月球卫星,通过将J_2轨道预测模型预瞄准仿真结果与直接积分RKF7(8)法仿真结果相对比,研究了不同类型月球卫星轨道对-Y面卫星舱板激光通信终端瞄准精度的影响。仿真结果表明,J_2轨道预测模型可以满足月球极地卫星月地激光通信要求,当轨道高度为1 000 km和2 000 km的时候,10 min方位角偏差不超过40μrad,而俯仰角偏差仅为7μrad时,在一定程度上J2轨道预测模型可以满足月地激光通信预瞄准要求。     

“龙江2号”月球轨道微卫星定轨分析

微纳卫星深空探测任务中,通常所分配的测控资源有限,因此有必要对有限测控资源条件下微纳卫星的定轨精度进行分析。以微纳卫星深空探测为背景,采用"龙江2号"微卫星的轨道测量数据对其定轨精度进行了分析。"龙江2号"微卫星只有USB轨道测量数据,且环月段测控资源相对紧张,每天有两站跟踪,共约3～4 h的轨道测量数据。首先介绍了"龙江2号"微卫星飞行任务及其飞行过程中影响测定轨的因素;其次给出了定轨的动力学模型,对微卫星地月转移段的定轨精度进行了分析;最后通过分析摄动力、动量轮卸载以及数据弧段长度的影响,给出了微卫星环月阶段所使用的定轨策略,并通过重叠弧段比较的模式,给出了微卫星环月段的定轨精度。研究结论可以为后续微纳卫星深空探测任务提供有益参考。     

基于星体边缘和轨道投影的光学自主导航算法

针对光学导航中存在的通过星体（球体）图像部分边缘点拟合椭圆参数计算轨道参数产生中间误差的问题,提出利用边缘点映射轨道参数的直接投影模型,避免拟合椭圆参数的方法。在小孔成像模型基础上,建立了边缘点与轨道参数的直接投影数学模型,对其映射过程进行了理论推导,利用列文伯格-马夸尔特迭代算法进行求解轨道参数。用实际探测器以及镜头参数进行数值仿真验证,结果表明：该方法在相同边缘点的条件下,轨道精度可以达到5‰。与传统方法相比,这种方法避免了椭圆的拟合过程,减少了引入中间误差过程。     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

同步双小行星系统共振轨道设计

研究了同步双小行星系统中共振轨道的设计方法及演化规律。首先，基于双椭球模型建立探测器运动方程，并给出共振轨道初值选取方法。然后，利用改进并行打靶法，提出一种双小行星系统平面共振轨道两步修正方法。同时结合稳定性理论及分岔理论，给出双小行星系统三维共振轨道生成和延拓方法；最后，以双小行星系统1999KW4为例，设计了共振比为1∶1,1∶2,1∶3,1∶4,2∶3的平面和空间共振轨道族，并分析了共振轨道的特性及轨道周期和轨道能量的变化规律。给出的双小行星系统中共振轨道的设计方法具有普适性，对未来双小行星系统探测任务中的轨道设计具有一定的参考意义与借鉴价值。     

基于TLE的弹道系数计算方法及应用分析

针对仅使用两行要素（Two Line Element，TLE）作为数据源的应用需求，研究了基于TLE轨道衰减的弹道系数计算方法。介绍了一种常用的基于两组TLE的直接计算法，分析TLE选取间隔对结果精度的影响；提出了一种基于多组TLE的迭代计算方法，以降低异常TLE对计算结果的影响；从弹道系数计算效果、在再入预报中的应用等方面对这两种方法进行比较分析。结果表明，两种方法各有优劣，基于多组TLE的迭代计算法稳定性更高、受TLE精度的影响更小；由于数据区间更短，基于两组TLE的计算结果对短期轨道衰减特性反应得更准确，用于临近再入时的预报效果更好。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

用两颗GPS卫星确定低轨卫星轨道的初值方法

研究了用两颗全球定位系统（ＧＰＳ）卫星粗略确定低轨卫星轨道的问题,并着重讨论了其中的初值问题,给出了一种有效的初值方法。实验结果证明：这种方法能给出一个确定的、实用的初值,大大减少了初轨计算的计算量,并使得算法收敛更加有保障。在工程实用方面比传统的猜测方法具有较大的优势。     

原子氧对航天器表面材料作用的数值模拟

对氏地球轨道环境对航天器表面材料的影响和航天器表面材料的低地球轨道环境寿命评定方法进行了介绍;并对低地球轨道环境和地面试验环境下,有无保护涂层的业胺所受冲蚀作用进行了成功的数值模拟,获得了具有工程应用价值的数值计算结果。该工作对航天器的设计具有指导意义。     

速率控制下的空间系绳的伸展

以地球同步轨道高度上的空间系绳的伸展为例,阐述了长度速率控制律中的参数对伸展过程的影响,控制律中参数选择的方法,最大系绳拉力的估算以及伸展过程中系绳应力的计算。