基于涡流发生器和Gurney襟翼的翼型绕流流动控制试验研究

为了研究翼型扰流流动控制,设计了一种三角形涡流发生器(VG)和两种Gurney襟翼,通过Gurney襟翼与VG 组合布局的方式进行风洞试验,对比了干净翼、干净翼加Gurney襟翼、干净翼加VG及干净翼加Gurney襟翼和VG这4种状态下的试验结果.试验结果表明:安装Gurney襟翼对翼型线性段升力在同一迎角下有明显提高...     

"回收/调节"方法在混合LES/RANS模拟方法中的应用

采用一种混合大涡模拟/雷诺平均Navier-Stokes(LES/RANS)模拟方法结合三阶加权基本无振荡(WENO)格式对马赫数为2.88的压缩斜坡流动进行了数值模拟,并采用"回收/调节"方法生成入口湍流脉动边界条件.当采用固定入口边界条件时,湍流边界层会缺乏合理的湍流能量,使之抵抗逆压梯度的能力减弱,会严重高估分离...     

可调高压导叶对1＋1/2对转涡轮性能影响的数值研究

对1＋1/2对转涡轮高压导叶转动不同角度后不同落压比时的涡轮性能进行了数值计算和分析,获得了不同导叶开度和不同落压比对涡轮性能影响的关系曲线.结果表明,高压导叶转角的变化可以有效地调节1＋1/2对转涡轮的流量;当导叶打开时,随着落压比的变化涡轮效率存在一个峰值,当导叶关闭时,涡轮效率随落压比的减小持续降低,并且降低的幅...     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

冷却剂/氧化剂组合式SteamJet发动机特性

为了系统深入地研究冷却剂/氧化剂组合式射流预冷却涡轮发动机(SteamJet)的发动机特性,建立了射流预冷却的热交换系统计算、物性修正计算、发动机部件特性修正计算和含氧化剂的燃烧室计算的数学模型,在此基础上,建立了基于双轴混排加力式涡扇发动机的SteamJet发动机性能计算模型,并编制了相应的计算程序。初步设计了SteamJet发动机的最大加力状态控制规律,计算分析了SteamJet发动机在不同冷却剂/氧化剂配比下沿飞行轨道的特性,并据此提出了影响冷却剂/氧化剂配比选择的主要因素;对冷却剂/氧化剂组合式SteamJet发动机进行了高度速度特性的计算和分析。结果表明,与喷水预冷却的SteamJet发动机相比,冷却剂/氧化剂组合式SteamJet发动机具有更好的燃烧稳定性和推力特性,能够满足高超声速飞行的需求。     

《推进技术》投稿指南

1．本刊面向国内外征稿,凡属各类火箭发动机、吸气式发动机、组合发动机、推进剂及非化学推进系统的理论研究、设计、制造和试验等方面的学术技术论文,欢迎投稿。     

高超声速进气道附面层分离无源被动控制

为了控制超燃冲压发动机进气道唇口反射激波诱导的附面层分离,根据其流动特征,提出了附面层泄除-吹除互相驱动的自适应、无源、被动控制方案。并采用空间HLLE格式、LU-SGS隐式推进、多块结构网格的有限体积法数值模拟程序对该流动现象进行了数值模拟。数值结果表明,施加自适应无源被动控制后,分离区长度减小为无控制时的45%,控制区域的总压恢复系数和流场均匀性提高。从而证实了自适应、无源、被动控制抑制高超声速进气道附面层分离的可行性。     

基于解重扩算法的GPS抗干扰实时接收机研究

提出了一种基于解重扩算法的GPS抗干扰实时接收机系统的硬件实现方案。此方案充分利用解重扩算法和GPS接收机的特点,将两者紧密耦合,并根据FPGA和DSP的不同性能,实现了资源的合理配置。实测数据验证表明,该系统不仅能够抑制干扰信号,而且可对卫星信号产生较大增益,实现多波束抗干扰。     

一种新型航班延误组合预测模型

为了克服单一的航班延误预测模型在预报时的缺陷,在分析航班延误的特点的情况下,提出了一种基于危险模式和灰色预测组合的新型航班延误预测的方法。对这两种预测方法的结果采用加权组合预测的方式来预测航班延误的趋势变化,预测结果是单一预测模型的加权和,加权系数动态确定。最后通过国内的某枢纽机场的航班延误情况进行了验证。实验表明该模型可以不受某一较差的预测模型影响,从而有较好的预测效果。