碳纤维预浸带切割剪裁平台系统研究

自动铺带技术是碳纤维复合材料的重要成型技术。根据最新提出的预浸带切割和铺放分离的"两步法"铺带技术,详细探讨预浸带切割平台的设计方案。设计方案包括预浸带双刀切割试验平台设计和搭建,基于自动铺带轨迹规划软件的双刀切割轨迹算法的研究和切割信息的植入,以及试验探究切割平台双刀切割典型边界所存在的问题及试验误差分析,以期为"两步法"铺带的研究提供基础。     

非对称变翼飞行器复合控制系统设计

针对非对称变翼飞行器的姿态控制问题，提出了一种复合控制系统的设计方法。基于非对称变翼的姿态动力学模型，将变翼作为一种主动控制方式，提出了非对称变翼的使用条件，并采用逻辑函数设计了气动舵和变翼的复合控制分配策略。利用扩张干扰观测器估计了变翼过程中的扰动，采用全局滑动模态的变结构控制方法，设计了姿态复合控制系统，抑制了变形过程中参数的剧烈变化和变形引起的附加扰动。通过仿真，一方面与固定翼飞行器对比，校验了非对称变翼控制的有效性；另一方面通过气动数据的正负拉偏，验证了控制器对气动参数的摄动有良好的鲁棒性。     

安全阀性能检测系统的测量不确定度

分析了安全阀性能检测系统中的主要误差因素，对安全阀动作性能和排量系数的测量不确定度进行了初步计算。     

农村家庭资产配置与金融市场参与的实证研究——以浙江金华地区为例

通过金融深化增加农村家庭参与金融市场的机会，提高农村家庭的福利，让金融为广大农村家庭服务，改善其资源配置，解决农村金融抑制的问题，是当前金融改革与发展的一个重要内容。文章将农村家庭的实物资产分为生活型与生产投资型，将金融资产分为安全型和风险型，根据问卷调查获取的数据建立Logistic回归模型，对东部地区农村家庭实物资产配置和参与金融市场的决定因素进行研究，探讨当前农村的金融深化与金融发展路径。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

高压涡轮转子叶片内部气流组织方式研究

为了获得涡轮转子叶片内部冷却结构的冷却性能,采用气热耦合计算的方法分析了在相同冷气总量条件下3种不同的气流组织方式对叶片冷却效果的影响,并选择其中相对优化的冷却结构进行了转速对进气压力和综合冷却效率的影响研究。结果表明,B型结构叶片气流组织较为合理,表面温度较为均匀,整体冷却效率得到有效提高;哥氏力和离心浮升力的存在导致冷却气流发生相应偏转,前缘滞止线随转速增加由压力面向吸力面偏移,同时前缘气膜出流随转速发生变化,随着转速增大,压力面综合冷却效率提高,吸力面综合冷却效率下降。     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

基于零空间的改进直接分配法

直接分配法是解决操纵面冗余飞行器控制分配的一种有效方法,但直接分配法只能对指定方向上误差最小目标进行优化,这种缺点限制了直接分配法的应用。零空间可以在保持转矩不变的前提下对控制量进行调节,利用这种特性,在三维转矩直接分配的基础上,通过对零空间坐标K进行数学规划可以使其他性能指标达到最优。推导证明,控制量最小问题和阻力最小问题分别可以转化为对坐标K的线性规划与二次规划问题。仿真结果表明,给出的基于零空间的改进直接分配法可以实现控制量最小和阻力最小控制分配。     

燃油喷嘴主要性能参数的影响因素及调试技术

燃油喷嘴是航空发动机燃烧室的一个主要元件,它的主要功用是按照发动机不同的工作状态,供给燃烧室合适数量的、具有良好雾化质量的燃油。喷嘴的供油量是保证发动机推力要求、影响燃烧效率和性能的一个主要指标。根据燃油喷嘴的不同结构,对影响发动机燃烧室性能的流量、喷雾锥角和分布不均匀度等参数进行理论分析,并结合实际调试情况进行验证,解决了燃油喷嘴性能试验时流量、喷雾锥角和分布不均匀度调试困难的技术瓶颈,具有较大的指导意义和广阔的应用前景。