飞机纵向静稳定度补偿

讨论了利用飞行控制系统对静不稳定飞机的三种补偿方式：延迟俯仰速度反馈、迎角反印刷品几法向过载负反馈。从而改变了飞机特性，诸如减轻质量，提高升阻比，增强机动性等。最后对三种补偿方案进行了比较，采用迎角反馈补偿是最直接有效的手段，但在工程实践中，往往采用俯仰速率和迎角混合反馈补偿方式。     

从非稳态飞行中确定飞机的纵向平衡曲线

介绍了俄罗斯飞行研究院广泛应用的从非稳态飞行中确定飞机纵向平衡曲线的试飞方法。该方法具有对试飞员动作要求宽、每个动作所包含的信息量大、节省起落、缩短试飞周期的优点。同时,还就该方法所存在的不足进行了讨论。     

推力向量控制方案及计算

本文归纳推力向量控制的主要方案,着重介绍摆动喷管、流体二次喷射方案的计算思路和结果.摆动喷管中的流场计算要考虑导弹偏摆对所产生的惯性力的影响;所得壁面压力畸变图说明,它是一个三维流场.在摆动喷管设计中要将铰链力减至最小,流体二次喷射的侧向力通过“等效实体模型”,用爆炸波的解来计算.     

某综合火力/飞行控制系统的设计

介绍了综合火力／飞行控制系统的基本组合，工作原理，对火力控制系统进行了解算，并以某型飞机为例，对其飞行控制系统进行了设计及仿真。     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

Electromechanical actuators (EMAs) are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension) by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.     

一种未来大型天地往返运输系统平台气动方案

针对未来低运行成本、可直接水平起降、重复使用的大型天地往返运输系统平台飞行器研制所需重点解决的全速域气动力性能需求与气动热防护匹配等难题，分析了典型航天飞机方案所存在的能量运行缺陷等主要问题及可能的改善方案。基于放宽气动热防护设计、涡轮/冲压/火箭发动机三动力组合、嵌套式旋转机翼全速域变体、在爬升阶段将飞行动能转化为高度势能以及再入阶段“跳跃式”盘旋减速飞行轨迹控制等设计思想，从能量损失速率控制和回收利用等角度出发，开展了一种新型大型天地往返运输系统平台气动布局概念设计研究。全速域气动力/热性能工程估算以及内/外流整体气动效能初步分析结果表明，该方案可有效满足整个飞行包线内的升重平衡需求，相比航天飞机方案具有显著的整体气动效能优势，值得进一步开展深入研究。     

一种基于系留无人机的图像遥测系统设计

针对海上船舶甲板的监控需求，本文提出了一种基于系留无人机的图像遥测系统设计方法，即通过系留无人机上的图像采集装置对被监控目标进行视频信号实时采集、压缩，再经过遥测装置的编码、调制、放大后由天线进行辐射，最后由数十公里外的遥测接收机完成接收、解调、解码，可实时显示船舶甲板图像信息。文中介绍了系统的软硬件组成、关键设备的设计方法、综合性能的分析，对相关图像遥测技术应用有一定参考意义。     

民用飞机试飞阶段人为因素适航审定技术研究

随着飞机各系统可靠性的不断提高,人为失误逐渐成为系统失效或造成飞行事故的主要因素,已成为设计及适航审定部门关注的重难点问题.当前国内外对于如何验证人为因素是否满足相关适航条款的要求仍处于理论探索阶段.针对上述问题,基于CCAR-25部条款分析试飞阶段民用飞机人为因素适航审定过程,包括基于SHELL模型及T.E.S.T矩阵的人为因素审定条款筛选,基于MOC5&MOC6的试验机符合性验证方法,并基于模糊评判方法给出数据分析实例.本文提出的人为因素适航审定思路及验证方法具有一定创新性,已在试飞阶段ARJ21-700飞机上初步应用,可为后续C919等民用飞机人为因素设计和适航审定提供技术支持和方法保证.     

Parachute dynamics and perturbation analysis of precision airdrop system

To analyze the parachute dynamics and stability characteristics of precision airdrop system,the fluid–structure interaction(FSI) dynamics coupling with the flight trajectory of a parachute–payload system is comprehensively predicted by numerical methods.The inflation behavior of a disk-gap-band parachute is specifically investigated using the arbitrary Lagrangian–Euler(ALE) penalty coupling method.With the available aerodynamic data obtained from the FSI simulation,a nine-degree-of-freedom(9DOF) dynamic model of a parachute–payload system is built and solved to simulate the descent trajectory of the multi-body dynamic system.Finally,a linear five-degree-of-freedom(5DOF) dynamic model is developed,the perturbation characteristics and the motion laws of the parachute and payload under a wind gust are analyzed by the linearization method and verified by a comparison with flight test data.The results of airdrop test demonstrate that our method can be further applied to the guidance and control of precision airdrop systems.