解离效应对超燃冲压发动机燃烧与传热的影响特性研究

为了分析高温解离效应对超燃冲压发动机燃烧和传热的影响,在超声速流动与燃烧一维理论模型的基础上,提出了"解离效率"的概念,建立了一种对高温燃气解离吸热效应进行量化评估的方法和发动机流动理论分析模型.应用该模型对日本宇宙航空研究开发机构M12-02发动机模型进行了研究,定量分析了解离效应对飞行马赫数12条件下超声速燃烧流动...     

航空发动机附件综合热管理性能分析

针对航空发动机舱内附件面临的热问题，提出了以隔热、通油冷却、通风冷却等为热防护措施的综合热管理方案，通过实验研究了隔热、通油冷却、通风冷却对附件温度的影响，获得了机匣温度、初始燃油温度及燃油流量等对附件表面温度及进出口燃油温升的影响规律。结果表明：隔热能够显著降低附件表面温度增长速率，在100 min工作时间内能够有效控制附件表面温度保持在200 ℃以下；附件表面温度的主要影响因素为初始燃油温度、加热功率、燃油流量，其中初始燃油温度决定附件进口温度，加热功率、燃油流量决定附件进出口温差，三者共同决定附件表面温度；通风冷却对未采取通油冷却的附件有一定的冷却效果，对采取通油冷却的附件没有明显的冷却效果。     

Maneuver control at high angle of attack based on real-time optimization of integrated aero-propulsion

To reduce the propulsion system installation thrust loss under high angle of attack maneuvering, a control method based on real-time optimization of the integrated aero-propulsion is proposed. Firstly, based on data fitting and physical principle, an integrated onboard model of propulsion system is established, which can calculate various performance parameters of the propulsion system in real time, and has high accuracy and real-time performance. Secondly, to improve the compatibility of optimization real-time performance and search accuracy, the online optimization control of aero-propulsion system is realized based on an improved trust region algorithm. Finally, by controlling the auxiliary intake valve, a good match between inlet and engine is realized, which solves the problems of intake flow reducing and total pressure recovery coefficient declining, and improves the installation performance of propulsion system. The simulation results indicate that, compared with the conventional independent engine control, the real-time integrated optimization method reduces the installed thrust loss by 3.61% under the design condition, and 4.58% under the off-design condition. Furthermore, the simulation on HIL (Hardware-In-the-Loop) platform verifies the real-time performance of integrated optimization method.     

中心支板参数对RBCC发动机性能影响研究

针对某宽域加速飞行任务下RBCC发动机中心支板主要几何参数设计问题，采用全流道一体化数值模拟方法，在Ma 0.4-6速域内研究支板阻塞比、顶角及长宽比等参数对发动机引射、亚/超燃模态的性能影响规律。结果表明，随着阻塞比增大，各模态下空气流动受压缩作用增强，燃烧反应更加充分，发动机总推力有0.13%-5%的提升；随着顶角增大，除Ma 2.5工况由流道截面构型变化引起激波形成外，增强的支板前缘激波使得燃烧反应位置较为集中，燃料喷注贯穿主流深度提高，较为充分的燃烧释热使得发动机总推力有2.2%-5.7%的提升；随着长宽比减小，在Ma 0.4-4条件下，增大的流道面积有利于煤油横向扩展，较好的氧燃掺混使得发动机总推力有2%-4.8%的提升，而在Ma 6条件下，支板前缘激波的减速增压作用逐渐减弱，发动机总推力可降低5.2%-7.1%。所得结论可为RBCC发动机中心支板设计参数选择提供依据。     

Vector deflection stability control of aero-engine based on linear active disturbance rejection

Aimed at the problem of instability in engine control caused by vector deflection in experiment of turbofan engines with Axisymmetric Vectoring Exhaust Nozzle (AVEN), a vector deflection stability control method of aero-engine based on Linear Active Disturbance Rejection Control (LADRC) is proposed. Firstly, based on CFD numerical simulation, aerodynamic performance model of AVEN is established, and the aerodynamic load change rule of the nozzle throat area actuator during vector deflection is revealed. Subsequently, the integrated model of AVEN/turbofan engine is established by Simulink/AMESim co-simulation. Finally, the nozzle throat area control loop based on LADRC is designed. The simulation results show that the integrated model can reflect the influence of vector deflection on the stability of the control system. The accuracy comparison between the fan rotor speed and the test data during vector deflection is larger than 1%, indicating a high degree of confidence. Compared with the conventional PID control, the designed LADRC control loop reduces the speed of the low-pressure rotor during vector deflection by 70%, which effectively improves the control stability of the vector deflection. Meanwhile, the fuel flow ratechange during the vector deflection process is smaller and more economical, which provides an important reference for engineering applications.     

不同支承结构下同转/对转中介轴承的刚度特性

中介轴承是耦合双转子航空发动机的关键部件，为了探明中介支承结构特征、装配条件和发动机工况对中介轴承刚度特性的影响，建立了中介圆柱滚子轴承刚度特性分析模型。模型综合考虑了中介支承结构形式、轴承内外环相对旋转方向、内外环配合参数、内外环锁紧螺母拧紧力矩、轴承工作温度、发动机转速、径向载荷和弹性流体动力润滑等方面的影响，分析了某型机中介轴承的径向刚度随各参数的变化规律。结果表明，内外环配合参数和发动机工况对中介轴承的刚度影响较大，设计时应考虑刚度变化对转子系统动力学特性的影响；中介轴承刚度对锁紧螺母的拧紧力矩不敏感。另外，中介轴承刚度同中介支承结构形式及内外环的相对旋转方向密切相关，设计时应结合气动性能和结构动力学的要求合理选取，避免对发动机的可靠性造成不利影响。