纵向波纹隔热屏气膜冷却特性实验

针对加力燃烧室纵向波纹隔热屏气膜冷却效果开展了细致的实验研究,利用红外热像仪测量了隔热屏壁面的温度分布,分析了隔热屏板型、吹风比、开孔率等参数对气膜冷却效率的影响。实验中板型选取了平板和纵向波纹隔热屏,吹风比变化范围是0.5~3.0,开孔率变化范围是1.4%~3.7%。结果表明:相比于平板隔热屏的气膜冷却效率沿程逐渐增加,纵向波纹隔热屏的气膜冷却效率随波纹板的起伏而起伏且大于平板隔热屏;随着吹风比的增加气膜冷却效率逐渐加大,在吹风比为3.0时达到最大值;气膜冷却效率在波峰处低,波谷处高,整体上随波纹板的起伏而波动,吹风比越小,气膜冷却效率随波纹板的起伏变化越明显;高吹风比(吹风比为2.0~3.0)下,气膜冷却效率沿程变化与增幅较为缓慢;整体上,随着开孔率的增加气膜冷却效率逐渐加大,小开孔率(开孔率为1.4%、2.7%)下的气膜冷却效率相差不大,但在次流背风侧,开孔率小的气膜冷却效率要小于开孔率大的气膜冷却效率。      

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.     

高温铝合金电磁超声检测回波特性及因素分析

针对高温铝合金在线检测条件下，温度对铝合金电磁超声检测回波特性的影响规律尚不明确、高温检测时缺陷定量/定位补偿困难这一难题，以螺旋线圈电磁超声换能器（EMAT）为例，建立了高温铝合金EMAT检测过程的场路耦合有限元模型；研究了温度对EMAT激励/接收换能效率、EMAT激励/接收电路的功率分配特性、超声传播过程中的扩散/介质衰减特性、回波幅值和超声声速等因素的影响规律；研制了耐高温EMAT探头，对20~500℃高温铝合金试样进行了检测实验，并测定了高温铝合金的超声介质衰减系数和超声声速。在仿真和实验相结合的基础上，分析了高温检测时超声回波幅值变化特性及其影响因素。结果表明：对于铝合金这类非铁磁性金属材料，导致高温时超声回波幅值下降的主要原因是超声介质衰减系数随着温度的升高而增大，其次为高温时EMAT激励/接收电路的功率分配特性的改变。在激励EMAT在试样表面形成的洛伦兹力不变的条件下，其所激励的超声波回波幅值具有随着温度的增加而增加的特点，可以有效减缓超声回波幅值下降的趋势。     

矩阵式数控加工在航空结构件批生产中的应用

以大批量数控加工的航空结构件生产为研究对象,运用人工干预环节集中化、数控加工过程自动化的理念,探索利用矩阵式数控加工进行多零件同时生产的应用方案。多零件集中装夹,通过系统自动读入每个零件的加工原点,自动调用零件的加工程序,完成相同(或不同)零件数控加工,在充分利用机床工作台面的同时,解决了批量生产过程中零件频繁装夹、找正、换刀和频繁调用加工程序的难题,达到降低劳动强度,提高生产效率的目的。     

新型主减隔振装置隔振性能测试试验研究

为解决新研全尺寸主减隔振装置地面性能试验中由于试验件尺寸大、重量重和试验状态多等难点,同时缩短试验周期并降低试验成本,提出了一种通过实测动载荷传递率评估主减隔振装置隔振性能的地面性能试验方法,给出了试验方案、试验夹具安装、试验内容以及过程。通过理论分析和试验结果,验证了实测动载荷传递率试验方案的可行性,测试结果真实可靠,为后续类似的系统级全尺寸隔振性能试验提供了一种新的试验方法。试验结果表明:新型主减隔振装置对垂向、航向和侧向三向激励的隔振效率均超过了80%,达到了预期的减振效果。     

航空活塞二冲程汽油机排气口高度优化研究

针对作为无人机动力的某可变排气二冲程发动机在去掉可变排气系统后对发动机性能的影响，利用Fire仿真软件建立了发动机的缸内工作过程仿真模型，通过仿真和试验的方法研究了去掉可变排气系统后的发动机特性，结果表明:去掉可变排气系统后在2000r/min、10%节气门开度和5500r/min、50%节气门开度条件下，发动机的扫气效率降低，输出功率下降。在此基础上，利用仿真研究的方法对排气口高度参数进行了优化研究。去掉可变系统后排气口高度最优值为36.3mm时可以在保证常用无人机飞行转速范围内，各工况下扫气效率较高，发动机指示功损失最小，输出功率可以满足无人机动力需求。      

基于MapReduce的CME参数识别模型并行计算技术

日冕物质抛射（Coronal Mass Ejection，CME）参数识别模型是太阳风预报过程的重要组成部分.在空间环境预报业务中，为提高太阳风预报的准确率，需要提高CME参数识别的精度.模型以计算任务串行的方式运行，运算效率低导致模型运算时间长，不能满足这种需求.CME参数识别模型的物理运算过程相互不独立，其在单节点上的运行方式不能满足并行化要求.基于MapReduce的并行计算框架，改进了CME参数识别模型的计算流程，提出CDMR（CME detection under MapReduce）方法，实现了CME参数识别模型的并行计算，并对比分析CME参数识别模型在串行计算和MapReduce并行计算下的运行时间，提高了模型的识别精度和计算效率.      

Influence of pre-tension on ballistic impact performance of multi-layer Kevlar 49 woven fabrics for gas turbine engine containment systems

In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics: global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.     

驻涡燃烧室前钝体燃料喷射性能数值分析

为研究驻涡燃烧室在前钝体燃料喷射状况下的燃烧性能,采用3维数值仿真模拟方法,对驻涡燃烧室前钝体燃料喷射 状况下的燃烧效率及燃烧室性能与无前钝体燃料喷射状况下的燃烧性能进行了对比分析,并对驻涡燃烧室的冷流以及燃烧状态 下的燃烧室性能进行了系统研究。燃烧室温度分布表明：前钝体顶部燃料喷射在0.2~0.7的喷射系数范围内,缩短了燃烧室火焰 长度,提高了燃烧室在相同轴向长度下的燃烧效率,使燃烧室更加紧凑;驻涡燃烧室前钝体顶部燃料喷射孔的孔径在一定范围内 的变化对燃烧室的燃烧效率、出口温度分布系数以及总压损失影响较小。