Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

Envelope protection for aircraft encountering upset condition based on dynamic envelope enlargement

Upset condition encountered by an aircraft in flight could pose great threat to flight safety, which is of chief importance in civil aviation. The causal factors have the nonlinear and multiple characteristics, and as a result the conventional envelope protection system cannot successfully do with the condition. So dynamic envelope based on differential manifold theory, which can take more coupling factors into account, is proposed as a basis to design a novel envelope protection system. Then the relationship between the dynamic envelope and the control coefficient or pilot command is obtained, and the result shows that the dynamic envelope can be enlarged with the change of control coefficient. Furthermore, quantification of flight security is realized via defining relative distance between flight state and dynamic envelope, which can detect whether there is a risk for an aircraft in flight. Finally, an envelope protection system based on dynamic envelope enlargement is proposed on the basis. NASA’s Generic Transport Model encountering hazard gust wind in climbing phase is taken as an example to verify the system’s feasibility. The result shows that the system can give a better operation encountering upset condition and to a certain extent reduce the number of accidents or incidents.     

Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves

Leakage due to wear is one of the main failure modes of aero-hydraulic spool valves. This paper established a practical coupling wear model for aero-hydraulic spool valves based on dynamic system modelling theory. Firstly, the experiment for wear mechanism verification proved that adhesive wear and abrasive wear did coexist during the working process of spool valves. Sec-ondly coupling behavior of each wear mechanism was characterized by analyzing actual time-variation of model parameters during wear evolution process. Meanwhile, Archard model and three-body abrasive wear model were utilized for adhesive wear and abrasive wear, respectively. Furthermore, their coupling wear model was established by calculating the actual wear volume. Finally, from the result of formal test, all the required parameters for our model were obtained. The relative error between model prediction and data of pre-test was also presented to verify the accuracy of model, which demonstrated that our model was useful for providing accurate prediction of spool valve’s wear life.     

肼类动态标准气体发生装置的设计

研制了用于制取肼类标准气体的动态配气装置。该装置通过精密控制的蠕动泵连续不断地注射一定量的肼类液体 ,同时以加热的高纯氮气作为载气 ,在动态中混合均匀后得到一定体积分数的肼类标准气体。结果显示 ,在载气温度、载气流量以及环境温度一定的条件下 ,通过控制进给流量可制备体积分数为 (0 .1～ 10 0 )× 10 -6的肼类标准气体     

造型细节和离地间隙对轿车气动性能影响研究_修改稿

汽车造型的不同处理方法、发动机安放位置、离地间隙、发动机舱冷却风的排出模式对轿车气动性能产生影响。应用FLUENT软件，分别对汽车造型的不同处理方法、发动机安放位置、离地间隙、发动机舱冷却风的排出模式进行气动性能仿真。结果表明：汽车造型的处理方法中以加车轮和加发动机舱对气动性能影响最大，发动机存在最佳的安放位置，不同的离地间隙对仿真结果影响很大，选择发动机舱冷却风的排出模式要综合考虑阻力系数和升力系数。     

针对不同目标时对接机构适应性研究

讨论了对接过程的动力学模型、与不同质量飞行器对接过程的特点，以纵向性能为例，提出了缓冲性能参数与对接初始条件组合设计，使对接机构能够适应不同对接飞行器质量特性的要求。仿真结果表明，该方法是可行的。     

桁架结构的静动态特性有限元分析

通过对桁架结构的静、动态分析，探讨如何建立桁架的有限元模型及计算方法，并利用MSC．Patran／Nastran程序对该结构进行静、动态分析计算，计算结果与实际情况吻合。     

飞机机头附近液态水含量分布规律的数值研究

在飞行器飞行过程中,安装在机头上的各类传感器结冰会对飞机的飞行安全产生不利影响。而液态水含量是影响飞机结冰的重要参数,为了更好地进行传感器结构及布局设计,对机头附近液态水含量分布规律进行数值研究。采用计算流体力学方法对飞机飞行时的空气-过冷水滴的稀疏两相流场进行数值模拟,通过求解N-S方程获得空气流场,采用欧拉法求解水滴运动场得到水滴运动轨迹。分析在不同来流马赫数、来流迎角及液滴直径等条件下,机头关键截面上广义水滴遮蔽高度的变化及机头关键位置上液态水含量的变化规律,研究不同状态参数对液态水含量分布的影响。结果表明:水滴遮蔽高度及浓度增加区范围随马赫数增大而增加,迎角的变化对机头上下表面液态水含量分布产生相反的影响。