相对差分单向测距（△DOR）技术在探月工程中的应用研究

相对差分单向测距（△DOR）是一种高精度测角技术,在深空探测任务的高精度测定轨方案中得到广泛应用．介绍了△DOR测量的基本原理及CCSDS（国际空间数据系统委员会）关于△测量的相关标准．针对中国探月工程月面软着陆任务提出的高精度测定轨要求,分析了△DOR测量的信号形式、工作模式以及测量精度,推导了解模糊过程．研究表明,△DOR测角精度达到25nrad,对应到月球上的距离约为10m．     

单滴燃料超临界特性实验研究的新方法

简述了超临界流体概念,超临界条件下单滴燃料蒸发和燃烧实验的研究进展.讨论了活塞驱动器技术研究单滴燃料超临界特性的新方法,简要介绍了活塞驱动器状态参数计算、流场显示、压力及温度测量的方法,指出了活塞驱动器研究单滴燃料超临界特性存在的问题.     

某型增压航空活塞发动机仿真研究

介绍了某型航空活塞发动机仿真模型的建立方法,建立了带有一级增压器的某型航空活塞发动机仿真模型,并进行了该发动机的地面特性的仿真计算,计算结果与试验结果符合得很好.在此基础上进行了该发动机高空特性的仿真计算,仿真结果与飞行试验数据较好地吻合,能够满足工程使用要求.      

TUGSAT-1/BRITE-Austria—The first Austrian nanosatellite

A nanosatellite to investigate the brightness oscillations of massive luminous stars by differential photometry is currently developed by a Canadian/Austrian team within the BRITE (Bright Target Explorer) project. The first Austrian satellite funded by the Austrian Space Program, called TUGSAT-1/BRITE-Austria, builds on the space heritage of the most successful Canadian CanX-2 and MOST missions. The satellite makes use of recent advances in miniaturized attitude determination and control systems. Precision three-axis stabilization by small reaction wheels and a star tracker provides the necessary accuracy for the photometer telescope to the arcminute level. This will provide to the astronomers photometric data of the most massive stars with unprecedented precision; data which cannot be obtained from the ground due to limitations imposed by the terrestrial atmosphere.The paper describes the spacecraft characteristics and the ground infrastructure being established in support of the BRITE mission which will consist of a constellation of up to four nearly identical satellites allowing to carry out long-term observation of stars (magnitude +3.5) not only with respect to brightness variations, but also in different spectrum ranges.     

活塞式发动机排气喷管断裂故障分析

对某型无人机活塞式发动机发生断裂故障的排气喷管进行了现场检查、断口分析及静力学分析,表明焊接质量不合格是导致故障发生的主要原因;提出了增加焊接点数、加大熔核尺寸、加强无损检测等排故措施。     

基于微分平坦方法的三维制导律设计

针对强耦合条件下的三维制导问题提出了一种新的设计框架。滚动引起的俯仰、偏航通道之间的强耦合关系,使得双通道解耦的三维制导律设计困难,使用微分平坦方法可以克服这一困难。首先使用矢量建立了导弹的一般运动学描述,并由此证明导弹制导系统是微分平坦的。依据系统的平坦输出设计比例-微分(PD)控制律可以实现目标静止或机动时的制导。进一步,通过对PD参数的适当约束可以实现任意落角及任意入射方位角的制导。仿真结果验证了该设计的优点。     

轴向柱塞泵滑靴副的热结构耦合特性

为了改善轴向柱塞泵滑靴副的耐磨损性能,建立了滑靴与斜盘摩擦副的瞬态热结构耦合模型,分析压力冲击条件下滑靴的表面温度、应力以及变形的变化规律.研究结果表明:某型轴向柱塞泵中滑靴温度随柱塞腔压力呈周期性变化,滑靴温度范围为45.5~49.8℃,且滑靴的最高温度出现在泵的吸排油过渡区.当滑靴处于泵的排油区时,滑靴的最大轴向应力为250MPa,集中在滑靴油腔与密封带之间的边缘区域.滑靴的轴向应力分层显著,引起滑靴的变形分化,其变形量为12.5~15μm,出现在滑靴的边缘.由于滑靴的输入热流密度增强磨粒的剪切力,加剧滑靴表面的微切削和挤压变形,导致滑靴表面出现条状剥落和凹坑磨损,呈现出黏着和磨粒磨损特征.      

Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

Remaining useful life prediction based on the Wiener process for an aviation axial piston pump

An aviation hydraulic axial piston pump’s degradation from comprehensive wear is a typical gradual failure model. Accurate wear prediction is difficult as random and uncertain char-acteristics must be factored into the estimation. The internal wear status of the axial piston pump is characterized by the return oil flow based on fault mechanism analysis of the main frictional pairs in the pump. The performance degradation model is described by the Wiener process to predict the remaining useful life (RUL) of the pump. Maximum likelihood estimation (MLE) is performed by utilizing the expectation maximization (EM) algorithm to estimate the initial parameters of the Wiener process while recursive estimation is conducted utilizing the Kalman filter method to estimate the drift coefficient of the Wiener process. The RUL of the pump is then calculated accord-ing to the performance degradation model based on the Wiener process. Experimental results indi-cate that the return oil flow is a suitable characteristic for reflecting the internal wear status of the axial piston pump, and thus the Wiener process-based method may effectively predicate the RUL of the pump.     

基于微分进化算法的航空发动机模型修正

为了提高航空发动机性能仿真模型精度,采用微分进化算法对发动机部件特性进行修正.对微分进化算法进行改进,提出折线式交叉变量变化方式,提高了算法的寻优能力.提出变步长牛顿-拉夫逊迭代算法,基于平衡方程残差范数变化趋势,改变牛顿-拉夫逊算法迭代计算步长,提高了模型的收敛性和收敛速度.在设计点,对各部件特性、引气系数、总压恢复系数进行修正,使修正后的模型输出与试验数据相匹配.仿真结果表明:改进后的牛顿-拉夫逊迭代算法收敛性更强、计算速度更快,修正后的各输出参数的最大建模误差减小到1.3762％,满足建模误差需求.