机载计算机安装架的强度计算

:叙述用有限元计算方法对特定的机载计算机安装架进行结构强度计算 ,内容包括静强度计算、结构自由振动分析和波形为后峰锯齿波的冲击载荷作用下的冲击响应分析。计算结果对安装架的设计具有重要的指导意义。     

再入航天器陶瓷拐角环防热计算与结构适用性分析

文章基于近地轨道及探月返回再入热环境,应用超高温陶瓷到再入航天器的典型防热结构,计算分析了再入过程中的防热结构温度场。利用温度场计算结果,再结合超高温陶瓷抗烧蚀性能以及结构设计与工艺性分析,就超高温陶瓷作为再入航天器防热结构的适用性进行了深入探讨。结果表明,由于超高温陶瓷的优良耐高温及耐烧蚀性能,在近地轨道及探月返回再入航天器防热结构上具有良好的应用前景。     

某气瓶结构振动断裂故障分析及改进措施

分析了某气瓶在振动试验中出现的耳片断裂故障,从结构动力学的角度揭示产品破坏的根本原因,给出改进思路,并结合实际产品提出多种修改模型,然后通过动力学仿真计算进行改进效果的对比,从而确定最佳的修改方案.最后,对改进后的气瓶结构进行随机振动试验,试验结果表明：振动过程中,气瓶改进结构在原结构破坏位置的动应力得到明显的降低,避免结构疲劳破坏,改进可行有效.     

OPNET仿真软件在校园网中的应用

OPNET是目前一种很好的网络仿真工具。详细分析了较为通用的校园网,根据给定的校园网网络拓扑结构建立仿真中的网络模型,运用OPNET仿真软件对校园网内部简单的电子邮件传递服务和比较繁重的HTTP浏览进行了详细的研究。在网络模型的基础上,进行指定仿真数据的搜集工作,最后运行仿真,并根据产生的报告给出分析和总结。     

机翼/主起落架连接结构传力路线分析

在分析载荷传递的各种路线情况的基础上,通过改变主撑杆接头厚度和隔板厚度来观察连接结构各部分的应力状态,总结出其对传力路线的影响及其自身在连接结构中所处的地位,根据分析结果给出连接结构设计意见及建议。     

三轴仿真转台设计方法研究

针对航空、航天领域的半实物仿真关键设备-三轴仿真转台,重点从结构形式、电机选择、控制方式和控制算法等方面对其设计方法进行研究并提出相应的设计建议,对三轴仿真转台系统设计者具有一定的参考价值。     

飞机结构修理手册编制研究

首先介绍了飞机结构修理手册的编制要求和编制依据,其次分别阐述了依据ATA2200和S1000D标准进行飞机结构修理手册编写的方法,最后比较两种标准的特点,并对大型客机结构修理手册的编制工作提出了初步建议。     

An experimental study of elastic properties of dragonfly-like flapping wings for use in biomimetic micro air vehicles (BMAVs)

This article studies the elastic properties of several biomimetic micro air vehicle (BMAV) wings that are based on a dragonfly wing. BMAVs are a new class of unmanned micro-sized air vehicles that mimic the flapping wing motion of flying biological organisms (e.g., insects, birds, and bats). Three structurally identical wings were fabricated using different materials: acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and acrylic. Simplified wing frame structures were fabricated from these materials and then a nanocomposite film was adhered to them which mimics the membrane of an actual dragonfly. These wings were then attached to an electromagnetic actu-ator and passively flapped at frequencies of 10–250 Hz. A three-dimensional high frame rate imag-ing system was used to capture the flapping motions of these wings at a resolution of 320 pixels × 240 pixels and 35000 frames per second. The maximum bending angle, maximum wing tip deflection, maximum wing tip twist angle, and wing tip twist speed of each wing were measured and compared to each other and the actual dragonfly wing. The results show that the ABS wing has considerable flexibility in the chordwise direction, whereas the PLA and acrylic wings show better conformity to an actual dragonfly wing in the spanwise direction. Past studies have shown that the aerodynamic performance of a BMAV flapping wing is enhanced if its chordwise flexibility is increased and its spanwise flexibility is reduced. Therefore, the ABS wing (fabricated using a 3D printer) shows the most promising results for future applications.     

Evidence of Element Diffusion Inside the Sun and the Stars and its Consequences on the Lithium Primordial Abundance

The process of element segregation in stars (also called "microscopic diffusion") has to be introduced in all computations of stellar structure to obtain consistent models. Although recognized by the pioneers of stellar physics, this process has long been forgotten, except for white dwarfs and for the so-called "chemically peculiar stars". More recently helioseismology has given evidence that this process occurs in the Sun, and leads to helium and heavier element depletion by about 20 percent. Some macroscopic motions (mild mixing) must also occur below the convection zone in order to account for the lithium depletion. These motions do not prevent the segregation : they only slightly smooth the abundance gradients. These results are presented here and the connexion with the 3He abundance is discussed. The importance of these processes for Pop II stars is also developped.