Effect of moderate geomagnetic storms on equatorial plasma bubbles over eastern Africa in the year 2012: Evolution and electrodynamics

Equatorial plasma bubbles (EPBs) are common features of the equatorial and low-latitude ionosphere and are known to cause radio wave scintillation which leads to the degradation of communication and navigation systems. Although these structures have been studied for decades, a full understanding of their evolution and dynamics remains important for space weather mitigation purposes. In this study, we present cases of EPBs occurrences around April and July 2012 geomagnetic storm periods over the African equatorial sector. The EPBs were observed from the Communications/Navigation Outage Forecasting System (C/NOFS) and generally correlated well to the ionospheric irregularities observed from the Global Positioning System total electron content (GPS-TEC) measurements (rate of TEC change, ROT). This study revealed that the evolution of the EPBs during moderate storms is controlled by the strength of the daytime equatorial electrojet (EEJ) currents regardless of the strength of the equatorial ionization anomaly (EIA), the latter is observed during the July storm case in particular. These effects were more evident during the main and part of the early recovery phases of the geomagnetic storm days considered. However, the evening hours TEC gradients between regions of the magnetic equator and ionization crests also played roles in the existence of ionospheric irregularities.     

高温存储对Sn-Pb-Ni凸点界面金属间化合物生长的影响

倒装焊工艺由于具有信号处理速度快、封装密度高、可靠性高等特点，已广泛应用于高密度集成电路封装工艺中。高可靠倒装焊器件的互连焊点通常采用10Sn90Pb等高铅焊料，该焊料具有剪切强度高、可靠性高等优点，但其熔点高、回流工艺窗口窄等特性给封装工艺带来一定难度，此外该焊料在高温存储环境的可靠性有待进一步提高。本文采用Ni元素对10Sn90Pb焊料进行改性，研究高温存储下Sn-Pb-Ni体系凸点的力学性能以及金属间化合物（Intermetallic compound,IMC）的生长演变规律，以此评估Ni元素对10Sn90Pb凸点可靠性的影响。主要结果如下：适量添加Ni元素可以细化10Sn90Pb焊点界面处IMC晶粒，降低高温存储条件下的IMC生长速度，但在一定程度上会降低凸点的剪切强度。0.05%~0.1%含量的Ni元素添加对10Sn90Pb凸点综合性能提升较为显著。     

K8、JK8机翼接头与检验量规协调准确度的提高

分析了 K8、 JL8机翼接头孔精加加后与检验量规位置协调的条件，介绍了为提高它们之间协调准确度所采取的措施及其效果。     

基于C167CS和MAS3507＋DAC3550解码器的音频播放器设计

多媒体播放器市场的快速发展为低成本的DSP/MCU混合器件的应用提供了发展的良机.本文分析了Infineon(SIEMENS)C167CS的结构,提出了Infineon(SIEMENS)C167CS单片机和MAS3507 DAC3550解码器开发的MP3播放器的方案,采用了自顶向下的设计方法对总体设计方案、硬件各个组成部分(播放器的硬件解码技术、数模转换的控制技术)和软件进行了分析和设计.全部程序用Keil公司的C编译器和链接器编译通过并运行良好,该系统具有实现简单,成本低,运行效率高,功能强大等优点,有很好的发展前途.     

IC制造中平坦化技术的性能与分析

表面平整化技术是半导体工业的关键技术,在一定程度上制约着半导体芯片集成技术的发展,针对多层立体布线的IC全局平坦化技术,介绍了代表当今平整化技术及其未来的发展方向,其中一些技术会取代传统的CMP技术而成为IC产业的主导技术之一;叙述了超大规模集成电路(ULSI)的发展对全局平整化的具体要求;对传统的CMP技术的特点进行了分析;并论述了当今主流的IC平整化技术的原理、性能以及未来的发展方向。     

一种无塔校准方法研究

在地面卫星测控系统中,目前使用较多的有塔校准技术具有一定的局限性,为了克服这种局限性,本文针对已有的卫星测控系统设备提出一种无塔校准方法,给出了具体无塔校相和无塔校零的实现方法.     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

8mm衰减标准装置

对8mm衰减标准装置的工作原理、系统设计、主要技术特点、误差分析等进行了详细介绍,并附有测试和分析数据。该装置达到了80dB的量程、全频段和±0.003dB/10dB的准确度。     

论带通信道的信道容量的不确定性

依据山农的经典论证方法 ,证明山农信道容量定理仅适用于低通信道 ,不适用于带通信道。对于带通信道 ,信道容量将随信道通带的中心频率而改变。所以带通信道的信道容量具有不确定性。