一种满足结构动态特性要求的支持元件设计方法

对支持元件在结构动态特性设计中的重要性作了深入分析，提出了一种利用给定的固有频率、非完全的振型数据设计支持元件，使结构系统满足动态特性要求的支持元件设计方法。文中将支持元件的质量、刚度矩阵表示成设计变量的函数，根据要求的固有频率，已知支持情况的结构有限元模型，用简单的插值法获得了支持元件设计变量的初值；再设计过程中，为了避免振型数据不全的矛盾，采用聚缩模型的形式依据正交条件构造误差函数，用约束变尺度优化方法获得支持元件的最终设计结果。误差函数的梯度用差分法计算。最后详细给出了该方法在某型飞机机翼颤振吹风模型支持元件设计时实际应用的全过程，结果表明效果良好。     

颤振主动抑制中的非线性问题

本文采用谐波平衡法,定量地解释了机翼颤振主动抑制风洞试验中出现的极限环现象。提出了比较精确的计及极限环基阶谐波与三阶谐波的分析计算方法。指出在采用液压舵机的情况下,伺服阀的不灵敏区是出现极限环现象的一个主要原因。     

涡轮叶片内部微小V肋-凹陷涡复合冷却流动与传热数值模拟

为强化航空发动机涡轮叶片内冷通道传热性能,针对带有微小V肋-凹陷涡高效复合冷却结构矩形通道,采用Abe Kondoh Nagano （AKN） k-ε湍流模型数值模拟研究了肋高与凹陷深度组合对流动传热特性的影响机理。结果表明,当凹陷深度一定,复合结构的强化换热效果随肋高增加而增加,3mm肋高复合结构的传热相比纯凹陷提高了87.1%;当肋高一定,传热随凹陷深度增加先增强后基本保持不变,6mm深凹陷复合结构相比纯V肋提高了52.8%。通过在凹陷上游布置V肋,增强了越过V肋冲入凹陷内流体的湍动能,从而使凹陷前部回流区减小;同时来自微小V肋的涡流与凹陷内部的涡流相互作用,增强了整个流场的动量和热量输运,使通道换热均匀,并相较纯凹陷或纯V肋结构均有显著提升。     

热载与进口气流条件对柱肋通道换热的影响

目前关于燃气涡轮叶片冷却的实验研究多数是在常温常压进口气流和低壁温条件下进行的,而实际燃气涡轮叶片的冷却气流为来自于压气机的高温高压空气,且涡轮叶片壁面热载（定义为加热壁面壁温与冷却气流进口温度之比）很高。为了掌握热载与进口气流条件对于涡轮叶片尾缘内部冷却通道的冷却效果的影响,本文在考虑空气物性随温度变化的情况下,采用数值模拟方法进行了相关的计算和分析。计算选取了两种进口气流条件（常温常压、高温高压）,热载为1.1-1.9,进口气流雷诺数为5×103-1×105。计算结果表明,进口气流雷诺数一定的情况下,随着热载的增大,通道内换热能力降低,流动阻力系数增大;与常温常压进口气流条件相比,高温高压进口气流条件导致通道努塞尔数降低,并且努塞尔数在高热载条件的降低更为显著;在进口气流雷诺数为60000的条件下,高温高压进口气流、热载为1.9的条件下通道的努塞尔数比与常温常压进口气流条件、热载为1.1条件下通道的努塞尔数降低了15.8%,且随着进口气流雷诺数的提高,通道换热的削弱程度进一步增大。本文的研究表明,涡轮叶片的冷却设计必须考虑叶片冷却的实际条件,并对实验数据结果进行合理修正。     

Parametric study of turbine NGV blade lean and vortex design

The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV) are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from previous studies where conflicting results have been reported for the effect on the NGV. The configuration was initially based on the energy efficient engine turbine which also served as the validation case for the computational method. A total of 17 NGV configurations were evaluated to study the effects of lean and vortex design on row efficiency and secondary kinetic energy. The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects. The results show that in the turbine entry NGV, the secondary flow strength is not a dominant factor that determines NGV losses and therefore the changes of loading distribution due to blade lean and the associated loss mecha-nisms should be regarded as a key factor. Radial mass flow redistribution under different NGV lean and twist is demonstrated as an addition key factor influencing row efficiency.     

低速流场中柔性悬臂板的后颤振响应

建立了一个新的非线性气动弹性模型,对低速流场中柔性悬臂板的后颤振响应特性进行了分析。建模中考虑了结构几何非线性、气动力非线性以及两者之间的强耦合效应。通过实验数据对所建立的气动弹性模型进行了验证。发现在低速流场中柔性悬臂板可能会以周期加倍的方式进入混沌运动。结构几何非线性效应和翼尖涡引起的非定常气动力效应对柔性悬臂板的结构响应有显著影响,而尾涡变形引起的非定常气动力对结构运动的影响较小。还研究了不同耦合算法的差异,给出了小展弦比大柔性结构非线性气动弹性数值仿真时耦合策略的选择依据。     

基于结构模态的机翼带吊舱有限元建模方法

针对无有限元模型的颤振计算建模问题,提出了一种采用结构优化方法建立有限元模型的方法。依据标准算例的结构尺寸和材料特性建立其有限元模型,采用集中质量单元和连接杆模拟外挂吊舱结构,得到了机翼带吊舱的标准模型。计算其结构模态并作为优化目标,建立几何尺寸、质量与标准模型一致。但结构参数不一致的初始模型;然后采用敏度优化算法优化初始模型,得到机翼带吊舱的优化模型。计算结果表明,优化模型与标准模型的颤振速度和频率均较为接近。     

Reliability analysis of aero-engine blades considering nonlinear strength degeneration

To comprehensively consider the effects of strength degeneration and failure correlation, an improved stress-strength interference (SSI) model is proposed to analyze the reliability of aeroengine blades with the fatigue failure mode. Two types of TC4 alloy experiments are conducted for the study on the damage accumulation law. All the parameters in the nonlinear damage model are obtained by the tension-compression fatigue tests, and the accuracy of the nonlinear damage model is verified by the damage tests. The strength degeneration model is put forward on the basis of the Chaboche nonlinear damage theory and the Griffith fracture criterion, and determined by measuring the fatigue toughness during the tests. From the comparison of two kinds of degeneration models based on the Miner’s linear law and the nonlinear damage model respectively, the nonlinear model has a significant advantage on prediction accuracy especially in the later period of life. A time-dependent SSI reliability model is established. By computing the stress distribution using the finite element (FE) technique, the reliability of a single blade during the whole service life is obtained. Considering the failure correlation of components, a modified reliability model of aero-engine blades with common cause failure (CCF) is presented. It shows a closer and more reasonable process with the actual working condition. The improved reliability model is illustrated to be applied to aero-engine blades well, and the approach purposed in this paper is suitable for any actual machinery component of aero-engine rotor systems.     

固定小翼颤振激励系统激励力建模研究

通过基于双时间方法求解非定常欧拉方程得到固定小翼激励力源数据,分析了这种新型颤振激励系统工作原理,对固定小翼新型颤振激励系统工作原理的分析,建立了激励力简化计算模型。可实现M=0.3～0.5飞机稳定飞行状态下激励力载荷计算,大大简化了计算过程,精度足够满足工程分析,可满足试飞数据实时处理的需要。     

Unsteady oscillation of a deformable airfoil section in incompressible flow

The unsteady aerodynamic loads (pressure increment and generalized forces) acting on a deformable thin airfoil section are determined for its arbitrary motion in the incompressible flow with transverse gusts. In this case, the exact Küssner solution in series is used for harmonic oscillation of an airfoil, in which the Theodorsen function is approximated by a sum of fractional functions with poles. In the time domain, these functions are replaced by the unknown functions that satisfy the one-type ordinary first order differential equations. The equations obtained are combined with the differential equations of the airfoil motion in the generalized coordinates and are used for analyzing the aeroelastic system stability and calculating its dynamic response to gust loads.