基于卡尔曼滤波技术的相对导航技术之研究

本论文主要是研究卡尔曼滤波参数混合技术应用于民用飞机相对导航系统。文中重点在于讨论两架飞机相对位置误差的演变。因此首先研究了飞机绝对导航位置误差的演变。讨论了惯导系统(INS)和卫星定位系统(GPS)的卡尔曼滤波混合。此外，讨论相对导航条件下参数混合以及在下列两种不同的情况下的混合结果：1、飞机间相互传送本机混合后的导航数据；2、未经混合的导航数据传送后再混合。采用MATLAB进行仿真，得到不同方式的导航系统相对位置估计误差演变。     

基于SPCE061A数字语音温度控制系统的设计

以凌阳SPCE061A单片机为控制核心,设计并制作了一款具有温度设定灵活、数字显示及语言播报功能的水温控制器,通过PID控制算法产生脉宽调制波,提高了控制精度。实践表明:该水温控制器达到了设计要求,有一定的实用开发价值。     

The verification of GNSS tropospheric tomography model in a mountainous area

The GNSS (Global Navigation Satellite System) has not been developed as a meteorological data source provider, but with a careful and sophisticated processing strategy it might be used as one. The term GNSS tomography refers to the usage of the ray traced GNSS signal as scanning rays in the tomographic model input. The model is divided into a number of voxels. The system is inverted and value of refractivity is obtained. Typically, as in the most of the inverse processing, there is a problem of the undetermined system and as a consequence the cofactor matrix is close to singular. To avoid singularity additional conditions or constrains should be added to the system. Here, additional parameters are derived with the help of the air flow analysis in the Sudety mountains (south-west region of Poland), and special Slant Wet Delay (SWD) trimming procedure. The flow’s synthetic parameters like the Bruint-Väisälä frequency and the Froude number are determined. This way the type of the flow is recognized and the analysis of the impact of orographic barrier has been quantified. The SWDs from the GNSS observations were tested against, SWD from raytracing through the COAMPS model field. The modified GNSS tomography model was tested for the real GNSS observations delivered from the GNSS network Karkonosze located in the Sudety mountains and compared with the COAMPS model. The solution shows a considerable improvement in comparison with plain tomographic model results.     

基于双力源的叠加式多维力传感器校准装置研究CSCD

介绍了一种基于叠加机原理的双力源多维力传感器校准装置的设计与研制,对装置的测量不确定度进行了分析,通过对三分量力传感器的校准实验,证明了校准装置不仅可以对多分量力传感器进行单分量校准,还能方便地实现耦合误差的校准。     

Air route network optimization in fragmented airspace based on cellular automata

Air route network optimization,one of the essential parts of the airspace planning,is an effective way to optimize airspace resources,increase airspace capacity,and alleviate air traffic con gestion.However,little has been done on the optimization of air route network in the fragmented airspace caused by prohibited,restricted,and dangerous areas (PRDs).In this paper,an air route network optimization model is developed with the total operational cost as the objective function while airspace restriction,air route network capacity,and non-straight-line factors (NSLF) are taken as major constraints.A square grid cellular space,Moore neighbors,a fixed boundary,together with a set of rules for solving the route network optimization model are designed based on cellular automata.The empirical traffic of airports with the largest traffic volume in each of the 9 flight information regions in mainland China is collected as the origin-destination (OD) air port pair demands.Based on traffic patterns,the model generates 35 air routes which successfully avoids 144 PRDs.Compared with the current air route network structure,the number of nodes decreases by 41.67％,while the total length of flight segments and air routes drop by 32.03％ and 5.82％ respectively.The NSLF decreases by 5.82％ with changes in the total length of the air route network.More importantly,the total operational cost of the whole network decreases by 6.22％.The computational results show the potential benefits of the model and the advantage of the algorithm.Optimization of air route network can significantly reduce operational cost while ensuring operation safety.     

基于Ansys Fluent的近场翼尖涡数值模拟与分析

为了进一步研究飞机远场尾涡,提供网格分配及湍流模型的参考,并为整机模拟提供必要的参考依据,通过基于Ansys Fluent的数值模拟方法,研究了NACA0012机翼的近场翼尖涡流场,采用有限体积法求解不可压缩雷诺平均Navier-Stokes方程,其中雷诺应力项分别以S-A和Realizable k-ε模型封闭,模拟了近场翼尖涡卷起的过程,分析了机翼表面压力以及涡核参数,包括轴向涡量、涡核位置、涡核粘性等,并与风洞实验结果进行了对比。结果分析表明:基于局部O-网的六面体网格,RKE模型要优于S-A模型,与实验值更为吻合。     

A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

飞机高温高压空气导管的振动特性研究

在分析某大型客机环境控制系统的配平子系统的基础上,基于有限元软件Patran和Nastran建立了配平系统的空气导管有限元分析模型,选用Lanczos算法,对管系进行动力学模态分析,获得了系统前五阶的频率和振型.同时,考察了气体热力学参数和球形接头作动力学参数对空气导管动力学模态特性的影响.结果表明:从频率上看,配平系统Part1在45Hz以下谐振模态分布密集.从振型上看,球形接头和滑动接头处的振型变化幅度较大;从动力学特性的影响因素来看,配平系统空气导管管系的固有频率随管内温度的增加而递减,随管内压力的增加而增加;球形接头起动力矩和刚度增大会增加各阶的固有频率.研究工作对于我国大型客机空气导管系统的可靠性设计具有参考价值.     

中心支板式RBCC发动机引射模态流动与燃烧研究

为了深入认识引射模态工作机理,针对中心支板式RBCC发动机,在飞行马赫数2、不同内置火箭流量时的工作情况进行了全流道一体化的数值模拟,并对其内流场特征、火箭射流/引射空气掺混发展特征以及复合型释热规律和火焰结构等开展了详细分析。研究发现:RBCC发动机引射模态下的流动掺混燃烧过程是一个复杂且高度耦合的过程。在即时预混燃烧(SMC)模式下,燃烧过程主要在内置火箭射流与来流空气之间形成的剪切层内进行;流道上游剪切层厚度较薄,温度和组分浓度梯度较大,掺混速率快;高释热区集中分布在流道上游,可分为超声速释热区和亚声速释热区;流道内的燃烧反应以扩散燃烧为主,随着掺混过程的进行逐渐向预混燃烧过渡。提高火箭流量,流道内温度升高,反应持续距离增加,但掺混效率降低。     

Percolation transition in temporal airport network

The air transportation system has a critical impact on the global economy. While the system reliability is essential for the operational management of air traffic, it remains challenging to understand the network reliability of the air transportation system. This paper focuses on how the global air traffic is integrated from local scale along with operational time. The integration process of air traffic into a temporally connected network is viewed as percolation process by increasing the integration time constantly. The critical integration time T_P which is found during the integration process can measure the global reliability of air traffic. The critical links at T_P are also identified, the delay of which will influence the global integration of the airport network. These findings may provide insights on the reliability management for the temporal airport network.