整体中空夹层复合材料力学性能的实验研究

研究了整体中空夹层复合材料的复合成型工艺,制作了满足要求的实验件。对整体中空夹层复合材料经、纬向的侧拉、侧压、平拉、平压、双层剪切和4点弯曲等性能进行了实验研究,获得了该种材料的主要力学性能参数,并与类似的蜂窝夹层材料部分力学性能进行了对比。分析了整体中空夹层复合材料经、纬向性能的差异以及材料的失效形式,得到了一些有益的结论,为该种材料的结构设计和性能分析奠定了重要的基础。     

轴向载荷下复合材料元件吸能能力的试验研究

试验研究了三种结构形式的复合材料元件在轴向准静态载荷下的压溃过程和能量吸收能力。通过组试件在轴向准静态载荷下的压溃试验，研究复合材料的缓冲吸能机理，对吸能能力进行了定义，并对试件的峰值截荷、持续压溃载荷和吸能能力等作了定量分析。     

内圆磨床床身设计参数的灵敏度分析及动态设计

机床床身在固有下的动态特性，对机床的加工精度有很大的影响，本文通过对组成框架型内圆磨床床身和双W型内圆磨床床身的主要肋板的厚度。位置等设计参数的灵敏度分析，找出了对该类型机床床身结构动态特性影响较大的设计参数，使磨床床身的设计既能保证有较好的结构动态特性，又能达到使其重量最轻的目的。     

声发射检验技术进展

本文简要介绍了声发射技术的发展史，并从声发射技术的原理、波形分析法、参数分析法、声源定位技术和声发射仪器几个方面进行了综述，主要讨论了最新的波形分析技术和检测仪器的构成。最后指出了声发射检测的发展方向是声发射信号的模拟识别及人工神经网络模式识别分析。     

航天材料热物理性能测试技术的发展现状

根据航天材料热物理性能测试技术的特点 ,系统介绍了国内航天材料热物理性能测试技术的发展状况和发展趋势 ,并详细介绍了目前我国航天材料热物理性能测试领域中所具备的测试技术和测试装置、航天热物理性能所涉及的研究领域和内容以及目前正在开展的研究工作。     

喷管扩张段烧蚀的“台阶效应”计算

当喉衬和扩张段内衬采用具有不同烧蚀率的材料时,常出现“台阶效应”.本文以气动热化学烧蚀机理为基楚,提出应用适当的对流换热和加剧的化学反应计算对台阶效应区进行修正的方法,使台阶效应区的烧蚀率预示更切合实际工况.     

基于3D技术的燃气舵烧蚀率测量方法研究CSCD

针对目前采用的燃气舵烧蚀率测量方法存在误差较大问题,提出了一种基于3D扫描技术的新型测量方法,可以有效提高燃气舵烧蚀率测量准确度,为后续武器型号精确设计奠定基础。     

Microstructure,porosity and mechanical properties of selective laser melted AlSi10Mg

Finite element modeling (FEM), microscopy, X-ray computed tomography (CT) and mechanical property tests were used to study the microstructure, porosity and mechanical properties of an AlSi10Mg alloy produced by selective laser melting (SLM). The simulation of the melt pool and thermal history under different energy densities produced an optimized result with an energy density of 44.5 J·mm⁻³. The high cooling rate during the SLM process significantly refined the previous α-Al dendrites. The growth direction of the network-like Al-Si eutectic structure at different orientations confirmed the anisotropic nature of the microstructure. Furthermore, the microhardness, tensile testing and fracture analysis results proved that there were no obvious distinctions in the strength between the transverse and longitudinal directions, and that the ductility was anisotropic, possibly due to the shape and distribution of the pores. The pores measured by X-ray CT at different energy densities confirmed that the sphericity of the pores was inversely related to pores volumes. With optimized processing conditions, the porosity of the selective laser melted sample decreased leading to the improved fabricated fuel system component via SLM.     

Ultrasound assisted solidification process of ternary Cu–Sn–Sb alloy

It is well-known that the application of ultrasound during liquid to solid transitions for alloys can refine the solidification microstructure and thus improves the mechanical properties. How-ever, most published work focuses on single phase dendritic growth, whereas little has been con-ducted on the multiphase alloys with complicated phase transformations during solidification. In this work, the solidification process of ternary Cu40Sn45Sb15 alloy was realized within intensive ultra-sonic field with a resonant frequency of 20 kHz and ultrasound power from 0 W to 1000 W. The ultrasound refines the size of the primary e(Cu3Sn) intermetallic compound by two orders of mag-nitudes. If the ultrasound power increases to 1000 W, g(Cu6Sn5) phase nucleates and grows directly from parent liquid phase without the occurrence of peri-eutectic reaction on the top of the alloy sam-ple where the ultrasound intensity is sufficiently high. These microstructural variations lead to the enhancement of compressive strength and elasticity modulus of ternary Cu40Sn45Sb15 alloy.     

丁腈橡胶增韧环氧树脂基烧蚀防热材料性能

以丁腈橡胶(CTBN)为增韧剂对环氧树脂(F51)进行增韧改性,通过FTIR、TG以及力学性能测试研究了丁腈橡胶对环氧树脂固化反应、热稳定性能和力学性能的影响,并分析了其增韧机理;分别采用燃气流剪切烧蚀试验和电弧风动烧蚀实验考核了低密度烧蚀材料的烧蚀性能。结果表明:经CTBN改性后,两者的分子链产生了一定程度的交联;树脂基体的拉伸、弯曲性能有所下降,但韧性得到了增强;热稳定性大大提高,增韧后的F51树脂在800℃时的残重率由增韧前的23%提高到了54%;低密度烧蚀材料的抗剪切、抗剥蚀能力得到了增强,且碳层的尺寸稳定性也得到了改善,烧蚀性能提高。