基于时空显著性建模的空中飞行器跟踪方法

以复杂背景下空中飞行器的鲁棒视觉跟踪问题为研究背景，为解决现有跟踪方法目标表征模型不够精确，算法鲁棒性严重受到目标形变、宽高比变化、复杂背景等因素干扰的问题，提出了建模跟踪场景中独立物体的显著性特性，用于构建精确的目标模型。提出的显著性估计方法有别于传统的单帧检测方法，利用跟踪算法提供的背景先验知识以及多帧图像观测数据，使用时空联合的方式进行建模估计，其结果用来指导目标跟踪算法选取有效视觉特征，建立精确目标表征模型，减小背景区域对算法模型的干扰。实验表明，提出的方法为上述难点问题提供了有效的解决方案，对空中飞行器的跟踪精度与鲁棒性优于大多数最先进的主流方法，在其他类型的目标跟踪任务中也有十分优越的性能表现。     

Multi-parameter optimization of machining impeller surface based on the on-machine measuring technique

Selecting the optimal machining parameters for impeller surface is a challenging task in the automatic manufacturing industry, due to its free-form surface and deep-crooked flow channel. Existing experimental methods require lots of machining experiments and off-line tests, which may lead to high machining cost and low efficiency. This paper proposes a novel method of machining parameters optimization for an impeller based on the on-machine measuring technique. The absolute average error and standard deviation of the measured points are used to define the grey relational grade for reconstructing the objective function, and the complex problem of multi-objective optimization is simplified into a problem of single-objective optimization. Then, by comparing the values of the defined grey relational grade in a designed orthogonal experiment, the optimal combination of the machining parameters is obtained. The experiment-solving process of the objective function corresponds to the minimization of the used errors, which is advantageous to reducing the machining error. The proposed method is efficient and low-cost, since it does not require re-clamping the workpiece for off-line tests. Its effectiveness is verified by an on-machine inspection experiment of the impeller blade.     

基于签名的控制流错误检测算法检测能力的验证模型

目前主要采用实验测试的方法对基于签名的控制流错误检测算法进行评价,但由于控制流错误模型的不确定性,而导致测试结果存在一定的偏差,本文尝试采用模型验证的方法评价控制流检测算法的错误检测能力。本文首先简述了基于签名的控制流错误检测算法的基本原理,其次,提出了控制流错误跳转关系表示方法和指出了传统的控制流错误检测能力分析方法中未考虑的影响检测能力的因素,接下来,结合这些因素提出了基于签名的控制流错误检测能力验证模型,最后给出实例,通过验证模型分析了目前典型的基于签名的控制流错误检测能力。
     

薄膜区传热传质蒸发对毛细蒸发弯月面稳定性的影响

蒸发毛细弯液面的稳定性对两相传热装置的运行有着重要意义。由于弯液面的蒸发50%以上发生在一个微小区域,即延展薄膜区,可以预期不稳定性将最先产生于这一区域。为对蒸发弯月面的稳定特性进行机理性研究,首次提出一种将线性稳定性分析与薄膜区传热传质数值分析巧妙结合的研究方法。该方法通过传热传质数值分析获得能够反映弯月面稳定特性的特征膜厚和长度,并将其应用于线性稳定性判据以获得弯月面的临界过热度。分析表明,两种方法的结合可以有效揭示蒸发弯月面的稳定机制,特别是毛细管半径、弯液面温度和工质的热物性对弯月面稳定性的影响。与相关文献报道的实验结果比较,证实了该方法的有效性。     

AutoScan系列复杂零件自动化三维测量装备开发与应用

自动化三维测量可实现复杂零件的精度检测,为后续工艺优化提供基础数据,是保证航空航天领域复杂零件成形精度的关键技术,但应用时尚存在以下问题：其一,自动化三维测量视点规划仍以人工示教为主,规划效率低、效果差;其二,锻造成形等工业现场工况恶劣,易使系统预先标定的参数发生漂移,测量精度难以保证;其三,多视测量数据拼接仍主要采用标志点拼接的方式,过程繁琐,应用局限大;其四,在线自动化测量时受工装夹具等影响,测量点云中存在大量背景噪声,影响数据自动处理的精度与稳定性。针对上述难题,介绍了基于双目测头的自动化测量视点规划、基于耦合焦距比例约束的系统参数自标定、基于全局优化的多视测量数据拼接、基于自适应阈值迭代最近点（ICP）点云背景噪声自动去除等关键技术;在此基础上,研制了系列自动化三维测量装备,包括PowerVirtualPlan视点规划软件、PowerScan三维测量软件、iPoint3D数据处理软件的开发;最后,介绍自动化三维测量装备在航天航空等领域的工程应用情况。     

Application of focused laser differential interferometer to hypersonic boundary-layer instability study

Accurate prediction of hypersonic boundary-layer transition plays an important role in thermal protection system design of hypersonic vehicles. Restricted by the capability of spatial diagnostics for hypersonic boundary-layer study, quite a lot of problems of hypersonic boundary-layer transition, such as nonlinearity and receptivity, remain outstanding. This work reports the application of focused laser differential interferometer to instability wave development across hypersonic boundary-layer on a flared cone model. To begin with, the focused laser differential interferometer is designed and set up in a Mach number 6 hypersonic quiet wind tunnel with the focal point in the laminar boundary-layer of a 5 degree half-angle flared cone model. Afterwards, instability experiments are carried out by traversing the focal point throughout the hypersonic boundary-layer and the density fluctuation along the boundary-layer profile is measured and analyzed. The results show that three types of instability waves ranging from 10 kHz to over 1 MHz are co-existing in the hypersonic boundary-layer, indicating the powerful capability of focused laser differential interferometer in dynamic response resolution for instability wave study in hypersonic flow regime; furthermore, quantitative analyses including spectra and bicoherence analysis of instability waves throughout the hypersonic boundary-layer for both cold and heated cone models are performed.     

空间红外遥感相机制冷机微振动对MTF影响分析

空间红外遥感相机内部活动部件微振动载荷会引起相机光学元件产生刚体位移和面形变化,从而影响相机的在轨光学成像品质。文章基于某空间红外遥感相机内部扰振源的测试结果,建立了适用于微振动分析的相机精细有限元模型,经分析计算,确定了基于Zernike多项式曲面拟合和调制传递函数(MTF)分析的方法和流程;最后结合某空间红外遥感相机进行MTF影响分析,结果显示制冷机微振动对该相机MTF影响在工程可接受的范围内。     

地月第二拉格朗日点卫星激光测距技术研究

介绍了月球/中继星激光测距的科学意义、研究状况和发展趋势;研究了地月第二拉格朗日点(L2点)纯反射式激光测距技术和任务设计,主要包含单体大孔径激光角锥反射器的设计与研制,以及基于云南天文台1.2 m望远镜的月球/中继星激光测距系统研究。研究结果表明:采用单脉冲能量3 J和10 ns脉宽脉冲激光器,预期系统能接收到的单脉冲回波光电子数约为0.74,单光子测距精度优于1 m。     

Rationale and systems architecture for a near-term human lunar return

Early human missions to the Moon have landed on six different sites on the lunar surface. These have all been in the low-latitude regions of the near side of the Moon. Early missions were designed primarily to assure crew safety rather than for scientific value. While the later missions added increasingly more challenging science, they remained restricted to near-side, low-latitude sites. Since the 1970s, we have learned considerably more about lunar planetology and resources. A return within the next five to ten years can greatly stimulate future human space exploration activities. We can learn much more about the distribution of lunar resources, especially about hydrogen, hydrated minerals, and water ice because they appear to be abundant near the lunar poles. The presence of hydrogen opens the possibility of industrial use of lunar resources to provide fuel for space transportation throughout the solar system.This paper discusses the rationale for near-term return of human crews to the Moon, and the advantages to be gained by selecting the Moon as the next target for human missions beyond low-Earth orbit. It describes a systems architecture for early missions, including transportation and habitation aspects. Specifically, we describe a primary transportation architecture that emphasizes existing Earth-to-orbit transportation systems, using expendable launch vehicles for cargo delivery and the Space Shuttle and its derivatives for human transportation. Transfer nodes should be located at the International Space Station (ISS) and at the Earth-Moon L1 (libration point).Each of the major systems is described, and the requisite technology readiness is assessed. These systems include Earth-to-orbit transportation, lunar transfer, lunar descent and landing, surface habitation and mobility, and return to Earth. With optimum reliance on currently existing space systems and a technology readiness assessment, we estimate the minimum development time required and perform order-of-magnitude cost estimates of a near-term human lunar mission.