压力敏感涂料PSP宽域(1~600 kPa)静态标定方法研究

压力敏感涂料PSP是一种先进的光学测试技术。涂料的标定误差是该技术的主要误差来源之一。压敏漆的测量范围正逐步从常规压力区间向超低压和超高压拓展,因此需要开发压力调节范围大、精度高的标定系统。本文将现有的变压力法和变浓度法相结合,提出了一种新型的PSP宽域压力标定方法及系统。通过理论计算的方式,分析了该系统与ISSI公司的商用PSP标定系统的性能差异。结果表明:PSP宽域压力标定系统在低压区（1~20 kPa）标定误差能够控制在0.5 kPa范围内,性能优于ISSI标定系统;中压区（20~200 kPa）与ISSI标定系统性能趋同,误差在4%以内,且随着压力增大,误差降低;高压区（200~600 kPa）可以弥补ISSI无法标定400 kPa以上范围的不足,能实现超高压环境中的PSP标定。本文还对最常用的两种快响应PSP进行了标定实验,结果表明:本文提出的系统标定精度高,能实现PSP宽域标定。     

带充液腔的自旋卫星稳定性问题

本文应用Pfeiffer的思想讨论带轴对称充液腔的卫星系统自旋稳定性。本方法的基本思想为将轴对称腔内的液体旋度平均化,使之与空间位置无关,由此将液体的无限自由度问题离散化为有限自由度问题,从而用线性理论讨论系统的自旋稳定性。用这方法,本文讨论了带充液腔的非轴对称卫星系统、带充液腔的双自旋卫星系统的自旋稳定性,给出了它们的自旋稳定性判据。此外,本文还给出了一些带有不同形状腔体的卫星系统自旋稳定域图,为实际工程设计人员提供理论参考。     

The thrust and lift of an ornithopter's membrane wings with simple flapping motion

Human beings flying with the help of aircrafts of various kinds have been able to fly for about one century. Although the flapping wings of animals served as an inspiration to pioneers of human flight, we don't really understand how they work. In this study, we employ the concept of four-bar linkage to design a flapping mechanism which simulates a flapping motion of a bird. Wind tunnel tests were performed to measure the lift and thrust of the mechanical membrane flapping wing under different frequency, speed, and angle of attack. It is observed that the flexibility of the wing structure will affect the thrust and lift force due to its deformation at high flapping frequency. The lift force will increase with the increase of the flapping frequency under the corresponding flying speed. For the same flapping frequency, the flying speed can be increased by decrease of the angle of attack with the trade of loosing some lift force. An angle of attack is necessary in a simple flapping motion in order to derive a lift force. The flapping motion generates the thrust to acquire the flying speed. The flying speed and angle of attack combine to generate the lift force for flying.     

Genetic differentiation induced by spaceflight treatment of Cistanche deserticola and identification of inter-simple sequence repeat markers associated with its medicinal constituent contents

The dried, fleshy stems of Cistanche deserticola (Orobanchaceae) are popular tonics in Traditional Chinese Medicine (TCM) to treat the inability of kidney in expelling extra fluid in the body, causing fluid retention, and reform reproductive system. However, the wild plants of C. deserticola have become endangered due to habitat downsizing and over-harvesting for its medicinal usages. The present research was carried out for the following purposes: (1) promoting the space-breeding research; (2) providing molecular evidence for agricultural selective breeding; and (3) protecting this endangered herbal medicine and conserving its genetic resources.     

Wavelength dimensioning for wavelength-routed WDM satellite network

Internet and broadband applications driven by data traffic demand have become key dri-vers for satellite constellations. The key technology to satisfy the high capacity requirements between satellites is optical satellite networks by means of wavelength division multiplexing inter-satellite links (ISLs) with wavelength routing (WDM-OSN). Due to the limited optical amplifier bandwidth onboard the satellite, it is important to minimize the wavelength requirements to provi-sion requests. However, ISLs should be dynamically established and deleted for each satellite according to its visible satellites. Furthermore, different link assignments will result in different topologies, hence yielding different routings and wavelength assignments. Thus, a perfect match model-based link assignment scheme (LAS-PMM) is proposed to design an appropriate topology such that shorter path could be routed and less wavelengths could be assigned for each ISL along the path. Finally, simulation results show that in comparison to the regular Manhattan street net-work (MSN) topology, wavelength requirements and average end-to-end delay based on the topol-ogy generated by LAS-PMM could be reduced by 24.8%and 12.4%, respectively.     

流场可压缩性对涡相互作用影响的数值研究

涡相互作用作为冲压发动机喷注装置的典型抽象流动现象,研究其可压缩性影响对于认识包含化学反应的真实燃料喷射场具有一定基础理论价值。基于经过数值验证的可压缩Navier-Stokes算法与压力泊松方程初始条件设置方法研究流场可压缩性对涡相互作用演化过程的影响。结果表明,以较高涡旋马赫数表征的可压缩性在改变涡对形态的同时,具有延缓涡旋相互靠近,迟滞融合进程的作用。关于涡对系统开始融合的临界条件,可压缩相互作用开始的临界展弦比与无量纲时间相比于低速涡对明显提高。为在无量纲时间意义下统一不同马赫数涡对相互作用的进程,从涡心密度随时间变化规律出发在不可压涡对特征时间的基础上,初步构建了考虑可压缩性的时间尺度修正关系。     

风扇/压气机周向模态识别中传感器角度偏差的影响

基于任意角度压缩感知(CS)方法分析了传感器安装角度偏差对风扇/压气机周向模态识别重构的影响,设计了一套自适应角度优化程序修正重构误差。利用数值试验探究了传感器角度偏差和数量对周向模态重构结果的影响,研究表明:当角度偏差等级为2.5%时,平均重构误差达到10%以上,若保证重构误差基本不变,将传感器数量从7个增加至25个,仅可以将角度偏差等级放宽至4%。而采用小生境微种群遗传算法进行自适应角度优化,在20 dB信噪比下,通过自适应角度优化可将角度偏差等级从2.5%放宽至10%,降低了传感器安装的精度要求。成功优化了一款冷却风扇在前三阶叶片通过频率下的主要周向声模态重构幅值。自适应角度优化算法有效提升了基于压缩感知的风扇/压气机周向模态重构可靠性。     

双脉冲固体火箭发动机隔舱打开与破片运动过程模拟

相比传统固体火箭发动机,具有能量管理特性的双脉冲固体火箭发动机结构更为复杂,为了提高其工作可靠性,针对核心部件金属隔舱的破片运动过程开展了数值仿真与试验研究。首先基于LS-DYNA软件,分析中引入监测函数、逻辑开关函数和加载驱动函数,模拟燃气流对破片的连续作用力,计算得到了在不同时刻破片的空间分布规律、撞击点位置及发动机内部损伤情况,保证了破片运动过程的高保真还原。其次,为了验证仿真结果的准确性,进行了模拟二脉冲初始工况的热流试验,发现破片撞击位置及损伤程度的仿真结果与试验数据一致性较高,其中撞击位置的预示误差小于9%,试验结果充分验证了有限元模型的准确性。由此,建立了适用于双脉冲固体火箭发动机金属隔舱破片运动过程的分析模型,实现了破片撞击位置及损伤程度的高精度预示。     

飞行监控系统中基于GPU的地形渲染

利用实时遥测飞行信息生成三维虚拟地形场景,旨在飞机试飞时,增强地面指挥人员对飞机实时位置地面场景的感知能力,帮助飞行员在试飞时处理复杂多变的飞行状况。为了逼真且流畅地生成三维地形场景,首先使用固定网格映射(PGM)的方法生成地形采样网格,接着利用几何着色器为三角形面片分配连续的与视点相关的细节等级(LOD),对缓存在纹理数组中的各等级高程数据和卫星照片进行混合采样。由于细节等级是连续的,因此各级纹理和高程之间能够平滑的过渡,增加了场景的真实性。最后,考虑到显存的容量限制,引入了一种内存与显存之间的纹理调度方法。整个算法都是面向图形处理单元(GPU)实现的,能够较好地兼顾实时性和真实性,实现多分辨率大规模地形场景的实时虚拟显示。根据本文算法实现的实时监控系统在支线飞机的飞行试验中取得了较好的效果。     

超声速PIV示踪粒子布撒技术研究

介绍了上海交通大学高超声速创新技术研究实验室为发展超声速PIV流场测试系统而开发的示踪粒子布撒技术。研究中设计了一套超声速风洞PIV示踪粒子布撒装置,提出了利用发生器罐体内的真空度吸入示踪粒子的加注方式,选定了测试流程时序并得到了较好的粒子布撒效果。通过比较不同的发生器罐注入压力对粒子布撒浓度的影响,得到了效果良好的测试方案。