华东地区围护结构节能研究

根据南京市的典型年逐时气象参数，对于该市的某一座高层建筑物，应用自编的逐时动态负荷模拟程序，输入围护结构（窗户、墙体和屋顶）相关的物理参数及其与周围环境的关系（地点及朝向等），计算围护结构冬季采暖期散热量及夏季制冷得热量。结果表明，采用双层塑窗代替单层塑窗，使用节能墙体代替传统墙体能够使得冬季围护结构传散热量减少51％，夏季围护结构总得热量减少46％。因此，这一结果为华东地区建筑节能技术提供了理论依据。     

An energy-based coupling degradation propagation model and its application to aviation actuation system

The degradation of components in complex mechatronic systems involves multiple physical processes which will cause coupling interactions among nodes in the system. The interaction of nodes may be carried out not only by physical connections but also by the environment which cannot be described by single network using the traditional methods. In order to give out a unified model to quantitatively describe the coupling degradation spreading by both physical connections and environment, a novel Energy-Flow-Field Network (EFFN) and a coupling degradation model based on EFFN are proposed in this paper. The EFFN is driven by energy flow and the state transition of spatially related nodes is triggered by the dissipation energy. An application is conducted on aviation actuation system in which the degradation spreading by fluid-thermal-solid interaction is considered. The degradation path and the most probable fault reason can be obtained by combining the state transition and energy output of nodes, which is consistent with the given scenario.     

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts. However, these abrasives cannot satisfy the machining requirements of difficult-to-machine materials with high hardness, high strength, and strong wearing resistance. Although superhard abrasives can machine the above-mentioned materials, their dressing and manufacturing costs are high. By contrast, ceramic corundum abrasives fabricated by sol–gel method is a cost-effective product between conventional and superhard abrasives. Ceramic corundum abrasives exhibit self-sharpening and high toughness. In this review, the optimization methods of ceramic corundum abrasive properties are introduced from three aspects: precursor synthesis, particle shaping, and sintering. Firstly, the functional mechanism of seeds and additives on the microstructural and mechanical properties of abrasives is analyzed. Specifically, seeds can reduce the phase transition temperature and improve fracture toughness. The grain size and uniformly dense structure can be controlled by applying an appropriate amount of multicomponent additives. Then, the urgent need of engineering application and machinability of special shape ceramic corundum abrasives is reviewed, and three methods of abrasive shaping are summarized. The micromold replication technique is highly advanced and can be used to prepare functional abrasives. Additionally, the influence of a new sintering method, namely, two-step sintering technique, on the microstructural and mechanical performance of ceramic corundum abrasives is summarized. Finally, the challenge and developmental trend of the optimization of ceramic corundum abrasives are prospected.     

用于分级燃烧的高性能燃油分配器的改进设计与仿真

为了提高燃料使用效率、降低污染物排放,在已有分级燃烧燃油分配器基础上,针对航空发动机双环腔燃烧室改进设计了1种高性能燃油分配器。简述了分级燃烧燃油分配器的工作原理,建立了其AMESim模型。根据设计要求,通过仿真验证了燃油分配器的稳定性、分配比与输入信号的稳态关系,计算了燃油分配器输出与燃油分配计划表之间的误差,分析了燃油分配器的动态特性以及对外部参数变化的鲁棒性,并且针对该分配器的非线性特性提出了解决办法。仿真结果表明：与文献[4]所设计的燃油分配器相比,改进设计的燃油分配器鲁棒性更好,稳态和动态性能更优。     

航空发动机增益调度控制的多项式平方和规划方法

针对现有的线性变参数(linear parameter varying,LPV)控制器设计方法都是关于仿射参数依赖系统而没有专门针对多项式描述的LPV系统这一现状,提出了一种基于多项式平方和(sum of squares,SOS)规划的增益调度控制设计方法,并将其用于转速大范围变化时的航空发动机高压转子转速及压比控制.根据发动机非线性模型获取不同转速下的状态空间模型,并利用多项式拟合的方法建立发动机线性变参数模型.给出能够保证无静差的增益调度控制结构,利用有界实定理和多项式平方和理论推导出能够保证闭环系统鲁棒稳定的SOS约束条件,并形成控制器求解的SOS规划问题,通过求解获得多项式描述的增益调度控制器.分别以LPV模型和发动机非线性模型为对象做阶跃仿真,结果表明:高压转子转速/发动机压比控制系统的调节时间在2s以内,稳态误差不超过0.1%.      

燃料分级对旋流火焰的动态特性影响研究

为深入研究分级旋流火焰特性,以分级旋流模型燃烧室为研究对象,对四个不同燃料分级比(Rf)条件下的分级旋流火焰进行了数值研究,在时均燃烧场特性分析的基础上进一步对燃料分级比为1和3两个工况进行了基于壁面建模的大涡模拟(WMLES)研究。结果表明:燃料分级比的改变会影响中心回流区(CRZ)的长度和宽度。燃烧室中截面的散点分布图能够显示出不同燃料分级比条件下的燃烧特征。燃料分级比为1时,燃烧室剪切层仅存在零散的涡破碎区;而燃料分级比为3时,伴随涡破碎区还出现了单螺旋分支进动涡核(PVC)。通过FFT变换获得的燃烧室内剪切层速度能谱主频与进动涡核的旋转频率相同,表明内剪切层速度脉动的产生与进动涡核有关。另外进动涡核会使流场内的燃料分布和燃烧模式发生周期性的变化,进而影响燃烧过程。调整燃料分级比在1附近,能够使分级火焰达到稳定燃烧降低排放的目标。     

应用PIV技术测试模型环形燃烧室流场

采用粒子图像测速仪(PIV)测量带双级旋流器模型环形燃烧室内冷态和燃烧流场,试验研究不同进口气流温度对其冷态和燃烧流场内回流区的形成以及气流速度分布的影响,试验结果表明:燃烧室燃烧流场内回流区长度要比冷态流场短,燃烧流场的脉动速度明显大于冷态流场;另外随着进口气流温度增加,燃烧室冷态和燃烧流场的回流区长度都稍有减少.      

爆震管壁面热负荷实验

在一台内径61 mm、长度1140 mm的气动阀式脉冲爆震发动机(PDE)上,进行了爆震管热负荷的测量计算,主要采用了两种换热模型:一是自然对流和热辐射模型;二是强迫对流模型.在两种方式下,爆震管的热负荷随频率的变化关系基本相同,即随频率升高而热负荷增大,但频率增加两倍热负荷增加却不止两倍.此外,在方式二的情况下,还得到煤油蒸发率随频率的变化关系,为PDE蒸发器设计提供参考.      

弹用S弯进气道气动性能试验

对一种弹用S弯进气道进行了试验,结果表明:①偏航角一定,攻角由负到正变化时,总压恢复系数先上升后变化不大,|DC₆₀|则先下降后小幅升高;②攻角一定,总压恢复系数和|DC₆₀|随偏航角的增加均呈先升高后降低的趋势;③大的攻角和偏航角组合状态下,总压恢复系数较低,|DC₆₀|偏大,但随偏航角进一步增大,进气道性能有所改善;④进/发匹配点处,进气道出口压力功率频谱较平坦且对姿态角和来流马赫数的变化均不敏感;⑤发动机小流量状态时,进气道模型发生了喘振,频率约为150 Hz.      

齿冠形收敛喷管模型气动和红外辐射特性数值研究

针对齿冠形收敛喷管的气动和红外辐射特性进行了数值计算,并与常规收敛喷管进行了对比.在本文研究范围内的结果表明:①齿冠形收敛喷管的推力损失大于常规收敛喷管;②齿冠形尾缘引射外界大气与主流掺混的能力强于常规收敛喷管,核心区长度得到有效衰减;③齿冠形喷管的热喷流3～5μm红外辐射强度在侧向相对常规收敛喷管的衰减量在15%左右,尾缘内倾角对于尾喷流红外辐射强度衰减的影响甚微;④齿冠内倾时,尾向处能遮挡喷管内部热部件.