中国空间探测领域40年发展

中国空间科学学会成立的40年,是中国空间探测逐渐走进世界舞台的40年,空间探测极大推动了空间科学和相邻学科的发展,也影响到经济、军事和日常生活诸多方面.本文简要回顾了从空间探测专业委员会成立的1980年至今,中国空间探测领域的主要发展历程,包括探空火箭、高空气球、科学卫星、月球与行星探测、载人航天空间探测、遥感卫星地面站等主要项目、进展和所取得的成果,对未来若干年空间探测的发展进行了展望.      

CCSDS高级在轨系统协议及其应用介绍

首先简要回顾了CCSDS(空间数据系统咨询委员会)AOS(高级在轨系统)建议及其在空间数据系统信息交换和处理方面的优势,然后介绍了继载人航天飞船有效载荷数据管理系统、"实践"五号卫星及双星探测计划之后,中国科学院空间科学与应用研究中心在"嫦娥"卫星、月球车综合电子演示系统、百兆级高速多路复接器及"萤火"一号探测器上开展CCSDS AOS应用研究的新进展。     

Experimental Study on Emission Performance of an LPP/TVC

A key issue in the commercial aircraft engine design is environmental acceptability, and designers are continually challenged to reduce emissions. In this paper, an experimental investigation is performed to evaluate the emission performance of a liquid-fueled trapped vortex combustor (TVC) under lean premixed prevaporized (LPP) mode. When operating as an LPP system, a TVC is fueled both in the cavities and in the main stream. The correlations between the emission performance and the total excess air ratio, the positions (4 positions) of the fuel injectors in the main stream, and the inlet temperature are obtained. Experi- mental results show that both the volume concentrations of unburnt hydrocarbon (UHC) and NOx (NO, NO2 usually grouped together as NOx) increase with the increase of total excess air ratio from 1.5 to 3.0; the emission performance relies heavily on the position of the main stream injector, and the best performance is achieved at Position 4 in the experiments; the increase of the inlet temperature impacts on the emission performance positively; the smallest volume concentrations of UHC and NOx obtained in the experiment are 94×10 6 and 2.3×10 6 respectively. This paper validates the feasibility of low emissions for an LPP/TVC and provides a reference for further optimization of TVCs.     

Detection of aerosol pollution sources during sandstorms in Northwestern China using remote sensed and model simulated data

The present paper has used a comprehensive approach to study atmosphere pollution sources including the study of vertical distribution characteristics, the epicenters of occurrence and transport of atmospheric aerosol in North-West China under intensive dust storm registered in all cities of the region in April 2014. To achieve this goal, the remote sensing data using Moderate Resolution Imaging Spectroradiometer satellite (MODIS) as well as model-simulated data, were used, which facilitate tracking the sources, routes, and spatial extent of dust storms. The results of the study have shown strong territory pollution with aerosol during sandstorm. According to ground-based air quality monitoring stations data, concentrations of PM₁₀ and PM_2.5 exceeded 400?μg/m³ and 150?μg/m³, respectively, the ratio PM_2.5/PM₁₀ being within the range of 0.123–0.661. According to MODIS/Terra Collection 6 Level-2 aerosol products data and the Deep Blue algorithm data, the aerosol optical depth (AOD) at 550?nm in the pollution epicenter was within 0.75–1. The vertical distribution of aerosols indicates that the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) 532?nm total attenuates backscatter coefficient ranges from 0.01 to 0.0001?km^?1?×?sr^?1 with the distribution of the main types of aerosols in the troposphere of the region within 0–12.5?km, where the most severe aerosol contamination is observed in the lower troposphere (at 3–6?km). According to satellite sounding and model-simulated data, the sources of pollution are the deserted regions of Northern and Northwestern China.     

磨削工件表面含湿空气射流冲击的换热

针对磨削工件表面的射流冲击对流换热过程,一方面,通过数值研究,揭示旋转表面诱导的气旋和射流冲击的耦合流动换热特征;另一方面,通过实验研究,定量分析含湿空气射流冲击的强化换热效果。研究结果表明,当盘缘在射流冲击喷嘴附近的切向速度与射流冲击方向协调时,旋转盘诱导的气旋运动和射流冲击的耦合作用有利于改善磨削弧区的对流换热,随着转盘旋转速度的增加,其强化对流换热的效果更显著;采用含湿空气作为冲击射流可以显著提高加热壁面的冷却效果。     

面向空间应用高可靠图像数传设备的设计与实现

针对空间高速图像数传任务需求, 设计并实现了一种采用SpaceWire总线传输协议的高速图像数传设备. 该设备的硬件以FPGA为控制核心, 完成对SpaceWire协议芯片的初始化配置、收发数据包处理、中断和异常状态处理等操作. 重点阐述了FPGA的可靠性设计, 包括状态机设计、异步时钟域设计和数据包传输与链路错误的恢复设计. 测试表明该设备能够稳定可靠地实现140 Mbit/s的图像数据传输, 对于链路的突发错误在一定时间内具有错误数据恢复能力, 能够有效保证传输数据的正确性和稳定性.      

面向对地成像观测任务的高空飞艇应急调度

针对应急条件下高空飞艇(HAA)对地成像观测任务调度问题进行研究,分析了问题中的主要约束条件,建立了以任务收益(TB)和巡航距离为优化目标的约束满足问题(CSP)模型。考虑飞艇侦察载荷具有侧摆观测能力,在构建视场范围约束模型和分辨率约束模型的基础上,对成像观测任务进行合成。提出了元任务与合成任务的概念,给出了任务合成的步骤与方法。将HAA应急调度问题转换为车辆路径问题(VRP),并进一步分解为任务排序主问题和路径选择子问题,分别应用改进粒子群(IPSO)算法和关键节点搜索(KNS)算法求解。详细介绍了算法中的编码、解码和移动等操作,以及采用的混沌初始化和禁忌搜索(TS)策略。通过仿真实验,对文中所提方法的有效性进行了验证。     

RTM 用R801 树脂工艺及性能

对一种新型RTM用双马来酰亚胺树脂R801的固化反应特性、成型工艺及其制备的复合材料性能进行了研究,DSC曲线表明该树脂体系的固化温度为170～220℃;黏度随温度变化曲线表明在70～120℃,树脂黏度增长缓慢,具有不少于7 h的适用期;在90℃左右时,其初始黏度<100 mPa.s,工艺操作窗口时间≥10 h;该树脂制备的MT300碳纤维复合材料在300℃时的压缩、弯曲、层剪性能保持率均≥63%。     

新的导弹协同定位技术

导弹协同作战的关键技术之一是导弹的精确定位技术,针对在体系对抗条件下,如何提高导弹集群的导航定位精度问题,构建了以弹载数据链和惯导系统为核心的协同定位系统,提出了一种基于相互测距信息的导弹协同定位方法.该方法使用加权秩亏自由网平差的方法来估计导弹集群的惯导系统定位误差.仿真表明:该方法可以有效地延缓惯导位置误差的发散速度和提高惯导定位精度,随着导弹数量的增多,惯导定位精度不断提高,当导弹数量大于4时,惯导定位精度将提高2倍以上.