超临界压力下竖直圆管内正癸烷对流换热不稳定性实验

以超临界压力正癸烷为工质,在内径2mm的竖直圆管内进行了不同工况条件下的流动与换热不稳定性实验研究。实验发现两种原理的不稳定性现象。转捩型是由于流动状态由层流向湍流转变引起,多为随机的小幅震荡,约在Re=5000左右出现;物性型由准临界温度附近剧烈变化物性所致,具有较大振幅和固定周期,约8~15s。增强系统稳定性的方法主要包括提高进口流体温度、升高压力或者采用向下流动方式。实验还发现在振荡区间内存在稳定区间现象。     

基于HTN的卫星应用任为分解方法

文章在深入分析卫星应用任务复杂性的基础上,研究了层次任务网络(HTN)方法对复杂卫星应用任务分解问题的适用性,并给出了相应的问题求解框架;深入研究了卫星应用任务需求要素预处理工作的主要内容和步骤,并在此基础上构建了卫星应用任务的域模型;最后给出了复杂任务及其分解方法的定义,采用基于HTN的方法对复杂卫星应用任务分解问题进行求解,同时给出了基于HTN的状态空间前向搜索算法.     

关于满足海军需求的直8型直升机的改进

本文对直8型机的发展提出了改进、改型的途径,并进行探讨,以满足适应我海军部队使用的各型直8机。     

嵌金属丝推进剂燃烧起始阶段增速特性研究

考虑了使用嵌金属丝装药的发动机工作过程中的多种因素,建立了金属丝与药柱、燃气间相互作用的控制方程组,并对方程组进行了数值求解,得到了嵌金属丝推进剂在燃烧起始阶段,增速比随时间的详细变化过程。结果表明,金属丝的热扩散率、熔点、直径和黑度以各自不同的方式影响金属丝的增速效果,熔点相对较低的金属丝可能会在内弹道曲线的初始阶段形成一个轻微的压强峰,固有燃速较低、着火温度较低的推进剂对嵌入金属丝较为敏感。文中数值方法计算量小,结果可靠,适于工程应用。     

多跑道内水平障碍物限制面边界确定方法

对机场多跑道系统的障碍物限制面——内水平面的边界确定方法进行了系统研究。通过将N条（N≥3）复杂构形跑道简化为2N个点集，根据国际民航组织内水平面障碍物限制面形成原理并利用多边形凹凸性几何特征，给出了内水平面边界的确定方法和计算步骤。     

220GHz频率步进雷达测距的实验研究

频率步进雷达是一种典型的高分辨雷达,它可以通过瞬时窄带合成宽带实现距离向的高分辨的同时降低A／D和其他设备的负担。文章介绍了220GHz频率步进雷达的工作原理和测距的方法,并对不同距离处的角反射器进行探测。实验结果表明,太赫兹雷达对角反射器距离向的探测距离精度可以达到厘米量级;同时,还对太赫兹雷达的探测距离进行了验证,最远探测距离可达35m。     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

一种宽带阵列通道均衡器设计

从基本FIR均衡器的原理出发,讨论了校正源的设置方法和均衡器系数的计算方法.为了适应宽带阵列中高速信号处理的要求,探讨了一种经典的FIR均衡器时域高速实现方法.该时域实现虽然结构简单,但在滤波器阶数较高时需要大量的乘法资源.为了降低均衡器对乘法资源的需求,借鉴快速卷积的实现方法,提出了一种基于快速傅里叶变换的高速率均衡器实现方法.与时域方法相比,该方法在滤波器阶数大于32时能明显降低对乘法资源的损耗.对实测数据的分析,验证了该方法的正确性.