热载下三边固支一边简支矩形薄板的解析解

基于薄板的小挠度理论,根据四边简支矩形薄板在横向变温作用下的挠度和内力解答,通过应用虚功原理和叠加原理,推导了三边固支一边简支矩形薄板在横向变温作用下的挠度方程和内力解析解,从而为以后的工程计算提供了理论依据.     

生物体液在线光纤光谱仪的研制

介绍了一种直接检测生物体液的光纤光谱仪，根据光纤和毛细管的特性，作者设计了一种特殊的光纤探头，该探头可以直接插入生物体内，通过毛细管采集生物体液，并直接引入光路中，即样品不需进行任何预处理就可以直接测量。为了提高测量灵敏度，探头中的光纤采取分层排列以增加体液在光路中的路程，该探头可使测量过程简化并且实现在位监测。利用计算机的并行口输出脉冲以控制步进电机而动色耗棱镜转动，用光电位增管接收其光谱信号，     

Ada软件的动态测试技术研究

为改善软件质量，对Ａｄａ软件的动态测试技术进行了研究，并且就以下内容着重进行了讨论；Ａｄａ软件的分析与理解；Ａｄａ软件的动态测试原则与方法；Ａｄａ软件的动态测试工具ＡＳＤＴ。     

控制系统模拟信号处理方法研究

模拟量采集精度对控制系统具有重要意义.研究了模拟量采集过程的软件设计流程,层次划分和模型,从传感器AD值到模拟量物理值之间不同处理阶段给出了常用方法描述.针对错误处理详细描述了错误诊断方法.最后将模拟量采集软件应用于某发动机模拟量采集中,通过试验进行模拟量测量值和软件输出值对比计算,结果表明此模拟量采集软件输出模拟量精度均在有效范围内.     

尖侧缘机身布局的俯仰力矩特性及扰流板控制

针对尖侧缘机身布局在大迎角下存在的正俯仰力矩（抬头力矩）问题，通过风洞试验，首先研究了俯仰力矩的迎角分区特性及流动演化规律：线性增长区（迎角为0°~15°），俯仰力矩线性增加，全机从附着流到形成进气道前缘涡和机翼涡；非线性增长区（迎角为17.5°~32.5°），俯仰力矩非线性增加，机头涡出现，机头涡和进气道前缘涡逐渐增强，机翼涡增强后破裂；衰减区（迎角为35°~65°），俯仰力矩逐渐减小，机头涡增强后破裂，进气道前缘涡破裂发展，机翼涡完全破裂。其次，发现了机身前体是产生正俯仰力矩的主要来源，机头涡是导致大迎角下正俯仰力矩的主控流动。当迎角为40°时，前体各截面正俯仰力矩在进气道前缘处达到最大，主要是由于该处机头涡诱导产生了较强的法向力。最后，提出了大迎角机身扰流板控制技术，产生了较好的控制效果。当迎角为40°时，扰流板可使正俯仰力矩减少62%，其原因是扰流板降低了机头涡涡量及其诱导产生的法向力，减少了机身前体对正俯仰力矩的贡献。该控制技术的缺点是扰流板会带来一些升力损失和附加阻力。基于尖侧缘机身参考宽度的雷诺数为2.59×10⁵。     

Nutation instability of spinning solid rocket motor spacecraft

The variation of mass,and moment of inertia of a spin-stabilized spacecraft leads to concern about the nutation instability.Here a careful analysis on the nutation instability is performed on a spacecraft propelled by solid rocket booster (SRB).The influences of specific solid propellant designs on transversal angular velocity are discussed.The results show that the typical SRB of End Burn suppresses the non-principal axial angular velocity.On the contrary,the frequently used SRB of Radial Burn could amplify the transversal angular velocity.The nutation instability caused by a design of Radial Burn could be remedied by the addition of End Burn at the same time based on the study of the combination design of both End Burn and Radial Burn.The analysis of the results proposes the design conception of how to control the nutation motion.The method is suitable to resolve the nutation instability of solid rocket motor with complex propellant patterns.     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.     

基于成本控制的机队优化配置方法

为了控制航空公司运营成本,实现燃油成本和机组时间成本最小,建立多目标整数规划模型,分析各成本因素所占比例,考虑旅客市场需求、航线频率限制、机队飞机寿命限制及飞机适航限制等因素,并采用层次分析法对模型进行求解。通过算例分析和评价,实现航线资源与机队的最优配置,为航空公司降低可变成本提供理论依据。