提高电铸局部电沉积速率试验研究

电铸成型是采用离子沉积的方法制造复制件，具有很好的复制精度，因此电铸技术得到了广泛的应用。但由于受极限电流密度等多方面因素的影响，电铸速率一直是制约电铸技术发展的一个瓶颈，许多学者为此做了大量的理论和试验研究，但对如何提高极限电流密度还没有提供一个比较满意的答案，为提高电铸局部电沉积速率，本文在前人工作的基础上，讨论了影响电铸速率的因素，提出了一种新型的电铸方法－喷射式电铸，并通过两组试验分析了局部电沉积速率怀电铸液流量的关系以及局部铸速率与喷嘴口径的关系，试验结果表明，采用喷射式电铸可以大大提高局部极限电流密度，从而使电铸局部电沉积速率有一个较大范围的提高，为将电铸与快速成型结合奠定了试验基础。     

一种基于实体模型的三轴数控加工刀轨生成算法

实体模型是几何造型的高级模型，它具有完整的曲面拓扑关系，国内基本实体模型的数摈加工算法的需求日渐迫切，本文提出了一种适合实体模型的三轴数控加工刀位轨迹生成算法；首先根据加工行距作一组平行于刀轴的平面，与模型的待加工表面求交，得到一系列交线，再根据加工步长规划另一组与上述平面垂直且平行于刀轴的平面，与上述交线求交，得到一交点网格，判断刀具与数据点的位置关系从而得到刀位轨迹。     

基于批生产的逐段式车间作业调度算法

探讨了离散作业型（Job shop）车间中的作业调度的分阶段模型，并根据离散作业调度的阶段性提出了基于作业状态空间的逐段式车间作业调度算法，通过对一个实际车间作业调度仿真比较，此算法运算速度比最短加工时间（SPT）和最少工作量剩余（LWR）算法快，其调度结果在实际作业车间具有可执行性。     

一种新的射频仿真目标位置控制方法与软件研究

针对射频目标仿真系统中目标位置的控制，本文通过对国内外目标位置控制的常用方法进行研究，提出一种新的通用目标位置控制方法，该方法适用于任何天线分布的面阵。利用这种新的方法编写了基于三元阵天线阵面的射频仿真目标位置控制软件，实现对多目标在天线阵面上多种轨迹运动下的高速准确的定位，并能实时监视目标的运动状态和运动轨迹。     

惩罚函数法在发动机性能计算中的应用

按照涡喷发动机工作时遵守的气动热力学定律，建立了发动机的稳定数学模型，并针对双轴涡轮发动机性能计算的非线性数学模型，利用优化和最优控制理论中的惩罚函数法，对发动机性能进行了基于约束的最优求解程序设计，利用程序对某型发动机的稳定飞行特性进行了计算，计算结果表明，使用惩罚函数法求出的特性曲线变化规律正确，发动机平衡方程的解的精度更高，在此基础上得出的发动机飞行特性也更准确。另外惩罚函数法对初值的要求很低，迭代运算不易发散。     

基于LabVIEW平台的数字抽取滤波器的设计与应用

介绍了基于LabVIEW平台的数字抽取滤波器的设计。该方法是对高采样率的数据进行低通数字滤波，然后对结果用1／K倍重新采样，将数字信号频带压缩K倍，从而实现动态测试较大的动态范围要求和划分频带要求，数字抽取滤波器的设计包含调制，数字滤波和抽取三方面，LabVIEW是一种基于图形编程语言（G语言）的开发环境，采用交互界面设计，模块化编程，该滤波器也是作者正在研制的动态测试分析虚拟仪器的一个重要组成部分。本文给出了在LabVIEW平台上所进行数字抽取滤波器的设计原理，仿真结果和在动态数字信号分析中的应用。     

Phase Compensation for Widely-Spaced Antenna Systems Employing Coherent Signal Combinations

This paper describes a technique for providing phase compensation to signals received at widely-spaced antennas and processed at a central location. Self-compensation is provided for pathlength variations in reference-signal distribution systems. The technique may be adapted to include the measurement and compensation of signal-channel phase variations. Practical systems which require this type of compensation include interferometric systems used for position and position-rate measurements of missiles and spacecraft, interferometers and arrays of antennas used for radio and radar astronomy, and arrays of large-aperture antennas used for deep-space communications.     

Microgravity effects on water supply and substrate properties in porous matrix root support systems.

The control of water content and water movement in granular substrate-based plant root systems in microgravity is a complex problem. Improper water and oxygen delivery to plant roots has delayed studies of the effects of microgravity on plant development and the use of plants in physical and mental life support systems. Our international effort (USA, Russia and Bulgaria) has upgraded the plant growth facilities on the Mir Orbital Station (OS) and used them to study the full life cycle of plants. The Bulgarian-Russian-developed Svet Space Greenhouse (SG) system was upgraded on the Mir OS in 1996. The US developed Gas Exchange Measurement System (GEMS) greatly extends the range of environmental parameters monitored. The Svet-GEMS complex was used to grow a fully developed wheat crop during 1996. The growth rate and development of these plants compared well with earth grown plants indicating that the root zone water and oxygen stresses that have limited plant development in previous long-duration experiments have been overcome. However, management of the root environment during this experiment involved several significant changes in control settings as the relationship between the water delivery system, water status sensors, and the substrate changed during the growth cycles.     

Evaluation of safety of hypobaric decompressions and EVA from positions of probabilistic theory

Formation and subsequent evolution of gas bubbles in blood and tissues of subjects exposed to decompression are casual processes in their nature. Such character of bubbling processes in a body predetermines probabilistic character of decompression sickness (DCS) incidence in divers, aviators and astronauts. Our original probabilistic theory of decompression safety is based on stochastic models of these processes and on the concept of critical volume of a free gas phase in body tissues. From positions of this theory, the probability of DCS incidence during single-stage decompressions and during hypobaric decompressions under EVA in particular, is defined by the distribution of possible values of nucleation efficiency in "pain" tissues and by its critical significance depended on the parameters of a concrete decompression. In the present study the following is shown: 1) the dimensionless index of critical nucleation efficiency for "pain" body tissues is a more adequate index of decompression stress in comparison with Tissue Ratio, TR; 2) a priory the decompression under EVA performed according to the Russian protocol is more safe than decompression under EVA performed in accordance with the U.S. protocol; 3) the Russian space suit operated at a higher pressure and having a higher "rigidity" induces a stronger inhibition of mechanisms of cavitation and gas bubbles formation in tissues of a subject located in it, and by that provides a more considerable reduction of the DCS risk during real EVA performance.     

Space and Soviet military planning

Most of the recent discussions concerning Soviet space activities focus on the new systems and emerging technologies, particularly those with military application. How the military capabilities of these systems and technologies will be used is equally important. Their employment will be guided by current Soviet thinking and policy concerning military actions in space. This policy has its origins in Soviet military doctrine which emphasizes offensive systems. Although the Soviet space programme denies having any military objectives, it is guided by a historical link with the Soviet military and directed by decisions made within the framework of Soviet doctrine. Additional insights into Soviet thinking concerning the militarization of space can be gained from recent treaties which the Soviets have signed concerning military space activities.