弯扭管道引起的旋涡畸变对离心压气机气动性能的影响

为了研究弯扭管道进气产生的旋涡畸变对离心压气机气动性能产生的影响,采用数值模拟及实验的方法进行研究。首先明确了管道出口截面二次流场结构随扭转角度的演化过程,发现随管道扭转角度增大,旋涡结构在孪生涡和偏置涡之间变化;当扭转角度等于90°时,管道出口近似呈现团涡结构。研究表明,与孪生涡相比,近似团涡的旋涡形式对压气机性能的影响更显著。在设计转速下,当近似团涡的旋涡方向与叶轮转动方向相同时,压气机压比和效率的下降量约达25%,并减小了喘振流量;而旋涡方向与叶轮转动方向相反时,压气机性能无明显变化,喘振流量同时增大。通过阐述不同叶高气流旋涡角度、旋涡强度与相对气流角之间的关联关系,发现叶轮进口气流旋涡在不同叶高位置上的旋涡角度和强度改变了叶片前缘相对气流角,进而对进气攻角产生明显作用。     

语篇分析理论指导下的高级英语教学

高级英语是高校针对英语专业三四年级学生开设的一门学科,目的是训练和提高学生的综合英语技能。将语篇分析理论运用到高级英语课堂教学中来,以具体课文为例,对其标题、结构、衔接和连贯进行分析,对高级英语的课程建设有很大的推动作用。     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

基于深度学习的组合体航天器模型预测控制

利用模型预测算法先预测控制结果后控制的类人行为特点，借助深度学习在多参数寻优上的优势，提出了一种基于卷积神经网络的模型预测控制算法，满足航天工程低硬件需求，实现组合航天器多场景下姿态控制律的重构。该算法首先利用模型预测控制将组合航天器从初始状态控制到预期状态，然后将控制过程中状态量用于3层3核卷积神经网络的训练，训练完成后，用该卷积神经网络代替模型预测对组合航天器进行控制，从而降低计算资源需求。仿真校验表明：该算法可预测5个控制周期内的控制参数，相比传统模型预测算法所需硬件计算时间降低约5倍，在一般硬件环境下30 s内即可完成各场景下的组合航天器姿态控制，控制精度在10 -4 量级。     

等离子鞘套热力学波动对电磁波传播的影响

针对等离子鞘套热力学波动造成电磁波传播特性变化的问题，结合湍流理论、等离子理论和电磁波传播理论，得到了热力学参数波动与介电常数间的关系。计算了不同状态下热力学参数波动引起S和Ka波段电磁波透射和反射系数的变化。结果表明，当电子密度增大，S波段反射系数变化减小、透射系数变化增大；当Ka波段在碰撞频率10MHz时，反射系数变化增大、透射系数变化减小，在碰撞频率1GHz和50GHz时透射系数变化反射系数变化先增后减。不同高度下波动的影响也不同，S波段透射和反射系数变化随高度升高先减后增；Ka波段透射系数变化先减后增、反射系数变化先减后增而后再次减小。因此，应根据实际环境状态获得波动的包络范围，进而针对性开展测控通信系统设计。     

多星多普勒频率变化率无源定位方法

针对多星时差频差定位系统时/频同步要求高、多星测向定位系统复杂等问题,提出一种多星多普勒频率变化率的无源定位体制,每颗卫星仅需单个接收天线和通道,且多星之间无需高精度时/频同步.针对定位观测量与辐射源位置的高度非线性,提出一种基于多普勒频率的多假设非线性最小二乘(M H-NLS)无源定位算法.理论推导了定位估计的克拉美-罗下限(CRLB),基于定位误差的几何分布(GDOP)分析了多星构型对定位误差的影响.计算机仿真分析表明,基于多普勒频率变化率的M H-NLS算法得到的定位误差能够达到CRLB.     

Genetic differentiation induced by spaceflight treatment of Cistanche deserticola and identification of inter-simple sequence repeat markers associated with its medicinal constituent contents

The dried, fleshy stems of Cistanche deserticola (Orobanchaceae) are popular tonics in Traditional Chinese Medicine (TCM) to treat the inability of kidney in expelling extra fluid in the body, causing fluid retention, and reform reproductive system. However, the wild plants of C. deserticola have become endangered due to habitat downsizing and over-harvesting for its medicinal usages. The present research was carried out for the following purposes: (1) promoting the space-breeding research; (2) providing molecular evidence for agricultural selective breeding; and (3) protecting this endangered herbal medicine and conserving its genetic resources.     

我国高原机场运行的地面及空勤特殊保障

位于我国西部高原的机场,一般净空条件极差、气候复杂多变。高原航线地形复杂,航路安全高度高,航路的运行安全问题尤为突出。针对中国西部高原复杂机场及航线的特点,对飞机性能、特殊飞行操作、适航改装、机务维修进行分析及论述,对规范高原航线运行合格审定提出一些建议。     

基于LabVIEW的超精密磨床嵌入式监控系统

针对超精密磨削机床的监控需求,基于NI–sbRIO硬件平台开发了一套应用于超精密磨床状态监测和数据采集的嵌入式监控系统,使用FPGA对温度、振动、声发射等信息进行实时数据采集,并使用实时处理器对数据进行分析和处理,实现对机床的实时状态监测和数据存储。通过FPGA编程取代硬件数据采集卡,成本低,灵活性强。试验表明,该系统能够胜任超精密磨床的监控任务。