C/C材料-高硅氧布/酚醛树脂复合缠绕制品工艺研究

随着固体发动机推进剂性能的提高,对发动机喷管绝热扩散段抗冲刷性能的要求也不断提高。通过对C/C-高硅氧布/酚醛复合材料制品缠绕成型的工艺研究,即在C/C材料外型面补缠高硅氧布/酚醛材料,了解不同材料的复合成型方法,选择一种适合绝热扩散段的工艺方法,提高材料的烧蚀性能和抗冲刷性能。     

高超声速飞行器气动热耗散、输运及转换技术研究进展

针对高超声速飞行器面临的严重气动热集中、累积和时变问题,从气动热耗散、输运和转换三个方面,分别论述了被动热耗散材料、结构和主动热耗散技术,基于高导热材料、热管和工质对流的热输运技术,以及再生转换和热电转换技术的研究现状及其在高超声速飞行器上的应用案例,提出了上述技术在面临高超声速气动热时存在的问题。最后,针对高超声速飞行器气动热耗散、输运和转换技术的发展趋势进行了展望。     

喉部长度和扩张角对离心压气机管式扩压器影响研究

针对带楔形扩压器的高负荷离心压气机,利用数值模拟手段对其进行了研究,计算获得的离心压气机特性与试验结果符合较好。在此基础上,设计了具有不同喉部长度和扩张角的管式扩压器,利用经过校核的数值模拟手段对管式扩压器的喉部长度和扩张角进行了参数化研究。研究发现较长的喉部会使压气机设计点的性能下降,但是却可以抑制近失速点扩压器内的流动分离,喉部长度与喉部直径之比为0.5时综合性能较优;较大的扩张角会造成扩压器内流动分离,增加流动损失,扩张角由4°增加到12°时压气机效率降低了约3%。     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

基于DTC的开关磁阻电机转矩脉动抑制方法研究

开关磁阻电机(SRM)具有诸多性能优势,发展前景广阔,然而严重的转矩脉动极大地限制了其应用范围.对SRM直接转矩控制方法(DTC)进行了研究,对DTC的核心思想进行了介绍,给出了空间电压矢量的选取原则.采用有限元法(FEM)和神经网络(NN)相结合的方法,在Matlab中搭建了一个四相8/6极SRM的动态仿真模型.在不同的工况下,对DTC的控制性能进行了仿真分析,结果表明,DTC的引入可以有效地抑制SRM的转矩脉动,同时保证系统具有良好的调速和带载能力.     

A mission template for exploration and damage mitigation of potential hazard of Near Earth Asteroids

The Apophis Exploratory and Mitigation Platform (AEMP) concept was developed as a prototype mission to explore and potentially deflect the Near Earth Asteroid (NEA) 99942 Apophis. Deflection of the asteroid from the potential 2036 impact will be achieved using a gravity tractor technique, while a permanent deflection, eliminating future threats, will be imparted using a novel albedo manipulation technique. This mission will serve as an archetypal template for future missions to small NEAs and could be adapted to mitigate the threat of collision with other potential Earth-crossing objects.     

梯型螺纹量规在航天产品检测中的应用

介绍了梯形螺纹量规的的工艺性能,从外观、相互作用、螺距半角和中径的测量等方面分析了梯形螺纹量规检测技术,并对其应用规划加以阐述,以提升航天军工产品的工艺技术水平和使用可靠性。     

航空液压壳体类零件数字化高效加工

随着科研项目的增多,原有模式下的生产成本和生产时间不断增加,尤其是交付时间很难保证.航空液压壳体类零件作为液压设备中的关键零件,对产品的总体功能和成本起着至关重要的作用.     

跨声速压气机多圆柱孔式处理机匣设计与扩稳机理研究

基于对跨声速轴流压气机内部失稳触发机制的认识,设计了一种新型多圆柱孔式处理机匣结构。对带该处理机匣的跨声速轴流压气机转子Rotor-37的内部流动进行了全三维非定常数值模拟,结果表明该新型多圆柱孔式处理机匣结构可使压气机的综合裕度提高6.5%,而最高效率点效率仅降低0.19%。对多圆柱孔式处理机匣的扩稳机理进行了详细分析,结果表明处理机匣能有效消除低速流体团引起的通道阻塞现象,并将低速阻塞流体团抽吸进入处理机匣容腔,然后从前端喷口预旋喷出以抑制叶顶区域的流动分离,从而有效提高跨声速轴流压气机的失速裕度。