飞机电磁防护设计

飞机经常在恶劣的电磁环境中飞行,为使机内的设备不受损害,除了保证机载设备具有足够的抗干扰能力外,在飞机结构上,还应采取其他防护措施。本文在分析电磁危害性的基础上,介绍了飞机雷电防护、静电防护,以及抗电磁脉冲和射频干扰的设计方法。     

新型结构粘接材料对航空有机玻璃性能的影响

选用新型结构粘接材料中低温固化环氧结构胶膜J-351和改性丙烯酸酯液体胶胶黏剂SY-50s,表征胶黏剂对有机玻璃的粘接性能以及应力-溶剂银纹性能,并研究胶黏剂对有机玻璃力学性能的影响。结果表明:两种胶黏剂对有机玻璃具有良好的粘接性能,J-351抗应力溶剂银纹性能优于SY-50s;有机玻璃表面施胶后力学性能下降,与定向有机玻璃相比,浇注有机玻璃力学性能下降更为明显。通过对拉伸试样断口形貌分析发现,拉伸试样带有胶黏剂的一侧首先发生破坏。因SY-50s与有机玻璃界面结合紧密,导致带有SY-50s胶黏剂的有机玻璃力学性能下降程度较大;而J-351环氧胶膜与有机玻璃界面清晰,对有机玻璃力学性能影响相对较小。因胶黏剂对有机玻璃性能的影响,导致采用SY-50s胶黏剂粘接的试样边缘连接强度低于J-351胶黏剂粘接的试样,新型结构粘接材料J-351环氧胶膜在有机玻璃粘接中应用性能良好。     

一种TiAl合金高温低循环疲劳性能及失效机理

通过对TiAl合金进行总应变范围控制的高温(750℃)低循环疲劳实验,研究双态(Duplex,DP)和全片层(Fully Lamellar,FL)组织形态对TiAl合金低循环疲劳性能和寿命的影响,并采用总应变幅-寿命方程对两类组态TiAl合金低循环疲劳寿命进行预测。结果表明:在相同温度和应变条件下,DP组态TiAl合金稳态迟滞回线对应的平均应力明显低于FL组态TiAl合金稳态迟滞回线对应的平均应力;采用总应变幅-疲劳寿命方程能够准确预测两种组态TiAl合金在750℃下的疲劳寿命,预测寿命基本位于试验寿命的±2倍分散带以内;另外,DP组态TiAl合金的疲劳源区位于试样的近心部,而FL组态TiAl合金的疲劳源区位于试样的次表面,两类组态TiAl合金的高温疲劳失效机理存在明显差异。     

Exploration and implementation of commonality valuation method in commercial aircraft family design

Commercial aircraft family design can reduce development costs, shorten development cycles, and expand the market coverage of aircraft. Commercial aircraft family development has become one of the most important features of modern aircraft design. This paper explores the effects of commonality on different aircraft models in a commercial aircraft family. The existing product commonality indexes are summarized and their limitations in the application to aircraft design are discussed. Then a new component commonality index is proposed based on the component decomposition structure. A model for calculating the aircraft program value is established,which considers development costs, manufacturing costs, sale price, operation costs and residual costs. The effects of aircraft commonality on time and economic costs of both development and manufacturing, and on sale price, are analyzed and quantified. The commonality evaluation strategy is obtained, which features comprehensive consideration of the aircraft program value and time costs. The break-even analysis of aircraft is proceeded on the basis of costs and price data. By using a real option method, the strategy considers the uncertainty of the aircraft program and the flexibility of the manufacturer. This strategy proves to be rational and applicable to aircraft design based on the calculation of three examples and the analysis of parameter sensitivity.     

无人水面艇海洋调查国内应用进展与展望

针对浅水区、污染区、极地等复杂海洋环境，传统海洋调查手段劳动强度高、安全风险大、作业效率低。无人水面艇具备无人、高效等特点，非常适合在上述复杂海洋环境中作业，并于近年来在海洋调查领域中得到了快速发展与广泛应用。从海洋调查领域中无人水面艇的优势、国内外典型的无人水面艇和应用案例入手，深入分析了我国无人水面艇海洋调查的现状，并对未来的技术发展方向进行了展望。实践表明，应用无人水面艇进行海底地形地貌调查的技术已基本成熟，水深数据质量和自主导航精度均可满足规范要求。在未来，须将无人水面艇的应用进一步扩展至物理海洋、海洋生物、海洋化学等专业领域，并加快研制基于可再生能源的长航程无人水面艇，以开展全球性海洋调查。     

绳索断裂对二维二次太阳翼展开过程影响分析

为识别二维二次太阳翼关键环节和预示其在轨展开故障模式，开展不同位置绳索断裂失效对太阳翼展开的影响程度分析。采用考虑绳索断裂的绳索联动轮力学模型，建立了适应于不同联动轮半径的联动轮受力模型，提出角度触发约束消除方法，解决了太阳翼第2次展开过程连续仿真问题，建立了太阳翼第2次展开动力学方程，分析了不同位置绳索断裂失效对太阳翼各板展开角度、展开构型和其他绳索张力的影响。分析表明，越靠近星体的绳索联动机构失效对太阳翼展开过程的影响越大，其中连接架上绳索联动机构失效可直接导致二维二次太阳翼在轨展开失败。     

尖侧缘机身布局的俯仰力矩特性及扰流板控制

针对尖侧缘机身布局在大迎角下存在的正俯仰力矩（抬头力矩）问题，通过风洞试验，首先研究了俯仰力矩的迎角分区特性及流动演化规律：线性增长区（迎角为0°~15°），俯仰力矩线性增加，全机从附着流到形成进气道前缘涡和机翼涡；非线性增长区（迎角为17.5°~32.5°），俯仰力矩非线性增加，机头涡出现，机头涡和进气道前缘涡逐渐增强，机翼涡增强后破裂；衰减区（迎角为35°~65°），俯仰力矩逐渐减小，机头涡增强后破裂，进气道前缘涡破裂发展，机翼涡完全破裂。其次，发现了机身前体是产生正俯仰力矩的主要来源，机头涡是导致大迎角下正俯仰力矩的主控流动。当迎角为40°时，前体各截面正俯仰力矩在进气道前缘处达到最大，主要是由于该处机头涡诱导产生了较强的法向力。最后，提出了大迎角机身扰流板控制技术，产生了较好的控制效果。当迎角为40°时，扰流板可使正俯仰力矩减少62%，其原因是扰流板降低了机头涡涡量及其诱导产生的法向力，减少了机身前体对正俯仰力矩的贡献。该控制技术的缺点是扰流板会带来一些升力损失和附加阻力。基于尖侧缘机身参考宽度的雷诺数为2.59×10⁵。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

防冰疏水微结构表面的设计

微结构表面具有出色的防水自净性能以及减阻性能,但目前超疏水微结构表面设计制备思路欠缺系统性,很多制备方法也比较复杂,在工程实践方面缺乏指导性。从工程制备的角度,概述了微结构表面设计的经典理论模型和国内外对微结构几何设计的理论研究,探究常用工程材料的理论本征接触角,通过力学平衡分析方法计算仿真确定疏水微观结构几何尺寸、几何截面外形,提出截面线长度及尺寸系数两个疏水微结构设计的参数,归纳了设计疏水微结构的流程,为制备疏水微结构或微结构模具提供理论基础。     

抗辐射保偏光纤的制备及其特性研究

通过对保偏光纤进行光漂白与低温相结合处理的方式，来提高光纤的抗辐射性能。保偏光纤再经过1.0 kGy的高剂量预辐照处理后，其损耗会明显增大。随后采用980nm的激光对光纤进行光漂白处理,其损耗并没有发生明显变化。但是，处理后的样品在小剂量辐照条件下其光纤传输呈现先减小后增大的趋势。对于通过液氮进行冷处理的预辐照样品，其光纤传输损耗得到明显的降低，同时光纤经过小剂量辐照后的损耗同样也具有先减小后增大的现象。最后，将两种处理方式相结合，一方面可以有效地降低预辐照光纤的传输损耗，另一方面也使得保偏光纤在小剂量辐照的条件下，使其传输损耗具有减小的趋势，大大提高了保偏光纤在小剂量辐照条件下的抗辐照特性。