CA6145i型车床噪声检测与降噪处理

通过对新机型CA6145i卧式车床进行噪声攻关试验,得出此型号机床噪声声压级超标,且主轴箱中伴有不规则的杂声。应用频谱分析法找到噪声源,采取相应措施降低或消除噪声,为车床的批量投产奠定基础。     

锌渣的固化处理及浸出毒性试验研究

采用药剂稳定化、水泥固化以及二者结合等方法对锌渣进行了处理研究。结果表明重金属螯合剂的药剂稳定化和水泥固化相结合的方法处理锌渣,其重金属含量可以低于固体废物毒性浸出标准的限值,能有效控制对周围环境的污染。所以,采用药剂稳定化和水泥固化结合的方法处理锌渣是完全可行的。     

平板弯曲问题的误差估计和网格自适应研究

本文对承受横向载荷的复合板设计了一个自动的误差估计和网络加密过程，并通过实际算例验证了此过程的有效性，结果证明所设计的过程能达到较高的计算精度。     

地下建筑物结构裂缝控制

有效控制由于变形作用 (水化热、混凝土干缩和气温温差 )引起的结构裂缝 ,进而防止工程结构的裂漏通病 ,是一个普遍关注的技术难题。本文以广州市滨江东路隧道等工程为实例 ,从结构设计、结构与基础的共同作用、施工技术、材料优选、环境条件及信息化施工等方面 ,介绍有效控制地下结构裂缝的对策和措施     

低频声波对水雾消散作用的实验研究

作者考查了低频声波(<50Hz)对于水雾消散的作用。通过建立声波消雾实验装置,测定了在水雾消散过程中,雾室内的声场分布、温度、消雾时间、雾滴谱的变化过程。实验结果表明声波作用对于水雾的消散具有明显的作用。并且,消雾的效果随着作用声波的频率和声压级(SPL)呈规律性的变化趋势。较低频率和较高声强的声波作用更有利于水雾的消散,在消雾的过程中温度起伏不大。而声致凝聚是声波消雾的主要因素之一。     

转动旋翼模型动柔度的试验研究

介绍测定转动旋翼模型动柔度的试验方案、试验程序，综述以作者自行设计的旋翼模型进行试验所得到的结果及其与理论计算结果的比较。结果表明，试验方案与方法是可行的，理论计算公式是正确的。     

CAPP系统中特征造型描述法的应用

本文结合专为哈尔滨制氧机厂开发的实用型CAPP系统，对CAPP系统的研制进行了探索性的研究，该系统以Windows作为开发平台，在基于零件特征造型建模的基础上，运用面向对象编程技术完成了一个交互式信息输入子系统，实现了回转体零件CAPP系统的信息输入，这里主要介绍零件特征信息模型的建立与特征信息的数据结构。     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994–1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.