Multi-criteria analysis of aircraft structures fracture

A novel modular multistep algorithm is proposed for multi-criteria analysis of fracture of aircraft structures with complex geometries. In order to evaluate the algorithm, the crack growth analysis is realized by the following three criteria, namely, the stress intensity factor, the strain energy release rate, and the J-integral. The algorithm implementation by the finite element method is considered and prospects of alternative implementation based on the meshfree methods are assigned.     

Trends in research of hydrodynamic damping in rotor supports of gas turbine engines

The paper studies different types of dampers for rotor supports of gas turbine engines (GTE). The advantages of hydrodynamic dampers are shown. Hydrodynamic dampers for GTE rotor supports are studied. A new design and technique of calculation are proposed for an adjustable hydrodynamic damper.     

Estimating the accuracy of the technique of reconstructing the rotational motion of a satellite based on the measurements of its angular velocity and the magnetic field of the Earth

The paper has studied the accuracy of the technique that allows the rotational motion of the Earth artificial satellites (AES) to be reconstructed based on the data of onboard measurements of angular velocity vectors and the strength of the Earth magnetic field (EMF). The technique is based on kinematic equations of the rotational motion of a rigid body. Both types of measurement data collected over some time interval have been processed jointly. The angular velocity measurements have been approximated using convenient formulas, which are substituted into the kinematic differential equations for the quaternion that specifies the transition from the body-fixed coordinate system of a satellite to the inertial coordinate system. Thus obtained equations represent a kinematic model of the rotational motion of a satellite. The solution of these equations, which approximate real motion, has been found by the least-square method from the condition of best fitting between the data of measurements of the EMF strength vector and its calculated values. The accuracy of the technique has been estimated by processing the data obtained from the board of the service module of the International Space Station (ISS). The reconstruction of station motion using the aforementioned technique has been compared with the telemetry data on the actual motion of the station. The technique has allowed us to reconstruct the station motion in the orbital orientation mode with a maximum error less than 0.6° and the turns with a maximal error of less than 1.2°.     

Vibrations of an elastic guide beam with a missile moving along it

Transverse nonstationary vibrations of a guide beam having the initial flexure are considered. An absolutely rigid missile moves under the propulsive force along this guide beam on two sliding supports. The beam displacements introduced by its vibrations are presented as an expansion with respect to the given functions according to the Ritz method. The equations of nonstationary vibration of the beam with the missile moving along it are obtained in the generalized coordinates, the expansion coefficients being chosen as them. The example is presented. Also studied is the effect of different beam and missile parameters on the beam displacement and transverse and angular velocity of the missile.     

A statistical study of C IV regions in 20 Oe-stars

In this paper, using the Gauss-Rotation model (GR model), we analyse the UV C IV resonance lines in the spectra of 20 Oe-stars of different spectral subtypes, in order to detect the structure of C IV region. We study the presence and behavior of absorption clouds and analyse their characteristics. From this analysis we can calculate the values of a group of physical parameters, such as the apparent rotational and radial velocities, the random velocities of the thermal motions of the ions, the Full Width at Half Maximum (FWHM), the optical depth, as well as the absorbed energy and the column density of the independent regions of matter, which produce the main and the satellite clouds of the studied spectral lines. Finally, we present the relations between these physical parameters and the spectral subtypes of the studied stars and we give our results about the structure of the C IV region in their atmosphere.     

空间自旋目标平动补偿与微动特征提取方法

针对空间自旋目标平动补偿与微动(m-D)特征提取问题，提出一种基于延时共轭相乘和微动分解的平动补偿与特征提取方法。该方法通过延时共轭相乘处理实现目标加速度估计，然后构建冗余的微动原子集，对加速度补偿后信号进行微动分解补偿，通过搜索补偿信号的最大谱峰获取目标的微动特征与速度信息。仿真试验表明,所提方法能够有效估计空间自旋目标的运动参数，并快速提取其微动特征。     

Electric potential structures of auroral acceleration region border from multi-spacecraft Cluster data

This paper studies an auroral event using data from three spacecraft of the Cluster mission, one inside and two at the poleward edge of the bottom of the Auroral Acceleration Region (AAR). The study reveals the three-dimensional profile of the region’s poleward boundary, showing spatial segmentation of the electric potential structures and their decay in time. It also depicts localized magnetic field variations and field-aligned currents that appear to have remained stable for at least 80?s. Such observations became possible due to the fortuitous motion of the three spacecraft nearly parallel to each other and tangential to the AAR edge, so that the differences and variations can be seen when the spacecraft enter and exit the segmentations, hence revealing their position with respect to the AAR.     

Time Sequence Change-Point Model of Electrostatic State Parameters of Aircraft Engine

Electrostatic monitoring technology of particle charging information can facilitate online monitoring of aero-engine,which effectively enhances engine fault diagnosis and health managements.Unlike traditional engine state monitoring technologies,aircraft engine monitoring by gas path electrostatic monitoring not only covers the predicted information source itself,but also detects the information that can provide an early warnings for initial fault states through gas path charging levels.This paper establishes a non-stationary time sequence change-point model for anomaly recognition of electrostatic signals based on change-point theory combined with difference method of non-stationary time series.Finally,electrostatic induction data were utilized by the engine life test for a particular aircraft to validate the proposed algorithm.The results indicate that the activity level and the event rate were0.5—0.8(nc)and 50%,respectively,which were far greater than 4—12(pc)and 0—4% under normal working conditions of the engine.     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

Thermal stresses in a multilayer hollow cylinder under thermal shock on its external surface

An exact analytical solution of the thermoelasticity problem is presented for a multilayer shallow cylinder with physical properties of the medium that are constant in the limits of each layer. The effect of thermal shock of different intensity as well as the penetration depth of thermal disturbance on the distribution of radial and circumferential thermal stresses has been studied as applied to the one- and two-layer cylinder. It has been shown that the circumferential compressive stresses appear on the external surface of the cylinder under thermal shock while the tensile stresses appear on the internal surface.