The Noise Model of the SEIS Seismometer of the InSight Mission to Mars

The SEIS (Seismic Experiment for Interior Structures) instrument on board the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. The InSight noise model is a key tool for the InSight mission and SEIS instrument requirement setup. It will also be used for future operation planning. This paper presents the analyses made to build a model of the Martian seismic noise as measured by the SEIS seismometer, around the seismic bandwidth of the instrument (from 0.01 Hz to 1 Hz). It includes the instrument self-noise, but also the environment parameters that impact the measurements. We present the general approach for the model determination, the environment assumptions, and we analyze the major and minor contributors to the noise model.     

Comparative analysis of architectures for the control loop of launch vehicles during atmospheric flight

Most of architectures used for the control loop of launch vehicles are based on attitude angle, attitude rate and lateral acceleration feedbacks. Related controllers are usually chosen to be stable. The main purpose of this paper is to give a comparison between a few architectures, pointing out the benefits of an unstable attitude angle feedback design for the control of an aerodynamically unstable launch vehicle. Such a design indeed is appropriate to reduce significantly the aerodynamic load during atmospheric flight. This is an issue of practical interest as it has become a design driver for mechanical sizing of modern launchers.The paper recalls the various goals the control loop is trying to reach all along the atmospheric flight (stability, set point tracking, aerodynamic load minimization …). For each phase of the flight, priorities are discussed. The paper then focuses on two critical phases of the atmospheric flight, i.e. high dynamic pressure period and atmospheric stages separation.     

Exospheres and Energetic Neutral Atoms of Mars, Venus and Titan

Our understanding of the upper atmosphere of unmagnetized bodies such as Mars, Venus and Titan has improved significantly in this decade. Recent observations by in situ and remote sensing instruments on board Mars Express, Venus Express and Cassini have revealed characteristics of the neutral upper atmospheres (exospheres) and of energetic neutral atoms (ENAs). The ENA environment in the vicinity of the bodies is by itself a significant study field, but ENAs are also used as a diagnostic tool for the exosphere and the interaction with the upstream plasmas. Synergy between theoretical and modeling work has also improved considerably. In this review, we summarize the recent progress of our understanding of the neutral environment in the vicinity of unmagnetized planets.     

一种改进的适应性超媒体学习单元模型

在netUniversité这一平台上,结合IMS LD标准建立学习单元模型,并以此标准根据新的教学需求对已有模型进行改进.将HBDI 全脑模型结合入学习内容管理工具,利用设计时工具Reload Editor和运行时工具CopperCore Player构造学习单元模型.     

Model of energetic populations at Ganymede,implications for an orbiter

A model is developed to study the energetic particle populations in Ganymede’s magnetosphere. The main objective is to estimate to what extent the moon could protect an orbiter from radiations. Using Liouville’s theorem, the phase space density of particles coming from Jupiter’s magnetosphere is calculated at any point of Ganymede’s environment. Up to energies of ∼50–100 keV for ions and ∼10–20 MeV for electrons, Ganymede’s magnetic field appears to be able to form distinctive populations as loss-cones over the polar caps and radiation belts. At larger energies, these features are blurred by Larmor radius effects; the moon absorption simply creates a quasi-isotropic layer of ∼500 km thickness where the flux is reduced by ∼40–50%. The predictions are compared to Galileo measurements. In particular, we demonstrate the importance of the moon sweeping in reducing the flux over the polar caps. Interestingly, this can be accounted for by assuming that the particles bouncing between Jupiter and Ganymede are ideally scattered in pitch angle and permanently re-fill the loss-cone, which increases the precipitation on Ganymede’s polar cap. In overall, it is estimated that the radiation dose received by an orbiter of Ganymede will be reduced by more than 50–60% compared to the expected dose at Jupiter/Ganymede distance. This should have a positive impact on the design of a future orbiter of Ganymede.     

Performance prediction and flowfield analysis of rotors in hover, using a coupled Euler/boundary layer method

The performance prediction of helicopter in hover is of key importance for manufacturers because hover is a design configuration for the definition of a rotorcraft. A lot of effort has been made for more than 10 years all over the world in order to develop and validate numerical methods based on CFD. An Euler method (WAVES) developed by ONERA and coupled with a boundary layer code (MI3DI) is presented, validated and applied to compute the total performance of rotors with different tip shapes. A new boundary condition for the Euler code has been tested and enables better calculation by eliminating ‘numerical' recirculation. The code has demonstrated its ability to rank two rotors with different planforms in good agreement with experiment. Under industrial requirements new grid strategies have been studied and should allow to reduce CPU time consumption. It is shown that WAVES/MI3DI can be efficiently used in the aerodynamic design process of a new rotor.     

An Investigation of the Mechanical Properties of Some Martian Regolith Simulants with Respect to the Surface Properties at the InSight Mission Landing Site

In support of the InSight mission in which two instruments (the SEIS seismometer and the \(\mbox{HP}^{3}\) heat flow probe) will interact directly with the regolith on the surface of Mars, a series of mechanical tests were conducted on three different regolith simulants to better understand the observations of the physical and mechanical parameters that will be derived from InSight. The mechanical data obtained were also compared to data on terrestrial sands. The density of the regolith strongly influences its mechanical properties, as determined from the data on terrestrial sands. The elastoplastic compression volume changes were investigated through oedometer tests that also provided estimates of possible changes in density with depth. The results of direct shear tests provided values of friction angles that were compared with that of a terrestrial sand, and an extrapolation to lower density provided a friction angle compatible with that estimated from previous observations on the surface of Mars. The importance of the contracting/dilating shear volume changes of sands on the dynamic penetration of the mole was determined, with penetration facilitated by the \(\sim1.3~\mbox{Mg/m}^{3}\) density estimated at the landing site. Seismic velocities, measured by means of piezoelectric bender elements in triaxial specimens submitted to various isotropic confining stresses, show the importance of the confining stress, with lesser influence of density changes under compression. A power law relation of velocity as a function of confining stress with an exponent of 0.3 was identified from the tests, allowing an estimate of the surface seismic velocity of 150 m/s. The effect on the seismic velocity of a 10% proportion of rock in the regolith was also studied. These data will be compared with in situ data measured by InSight after landing.     

Finite-Difference Modeling of Acoustic and Gravity Wave Propagation in Mars Atmosphere: Application to Infrasounds Emitted by Meteor Impacts

The Jovian Auroral Distributions Experiment (JADE) on Juno provides the critical in situ measurements of electrons and ions needed to understand the plasma energy particles and processes that fill the Jovian magnetosphere and ultimately produce its strong aurora. JADE is an instrument suite that includes three essentially identical electron sensors (JADE-Es), a single ion sensor (JADE-I), and a highly capable Electronics Box (EBox) that resides in the Juno Radiation Vault and provides all necessary control, low and high voltages, and computing support for the four sensors. The three JADE-Es are arrayed 120^° apart around the Juno spacecraft to measure complete electron distributions from ～0.1 to 100 keV and provide detailed electron pitch-angle distributions at a 1 s cadence, independent of spacecraft spin phase. JADE-I measures ions from ～5 eV to ～50 keV over an instantaneous field of view of 270^°×90^° in 4 s and makes observations over all directions in space each 30 s rotation of the Juno spacecraft. JADE-I also provides ion composition measurements from 1 to 50 amu with m/Δm～2.5, which is sufficient to separate the heavy and light ions, as well as O+ vs S+, in the Jovian magnetosphere. All four sensors were extensively tested and calibrated in specialized facilities, ensuring excellent on-orbit observations at Jupiter. This paper documents the JADE design, construction, calibration, and planned science operations, data processing, and data products. Finally, the Appendix describes the Southwest Research Institute [SwRI] electron calibration facility, which was developed and used for all JADE-E calibrations. Collectively, JADE provides remarkably broad and detailed measurements of the Jovian auroral region and magnetospheric plasmas, which will surely revolutionize our understanding of these important and complex regions.     

Evaluating the Wind-Induced Mechanical Noise on the InSight Seismometers

The SEIS (Seismic Experiment for Interior Structures) instrument onboard the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. Here we analyse in-situ wind measurements from previous Mars space missions to understand the wind environment that we are likely to encounter on Mars, and then we use an elastic ground deformation model to evaluate the mechanical noise contributions on the SEIS instrument due to the interaction between the Martian winds and the InSight lander. Lander mechanical noise maps that will be used to select the best deployment site for SEIS once the InSight lander arrives on Mars are also presented. We find the lander mechanical noise may be a detectable signal on the InSight seismometers. However, for the baseline SEIS deployment position, the noise is expected to be below the total noise requirement \(>97~\%\) of the time and is, therefore, not expected to endanger the InSight mission objectives.