Optimum parameter matching obtained by experiments for coring drilling into lunar simulant

This paper performs a series of ground experiments (on the Earth) to obtain optimum parameter matching for a future core drill on the Moon. Three common stages, I, II, III, are recognized with respect to the cut per revolution (CPR), which is defined as the ratio between the feeding speed and the rotating speed. The optimum matching between the feeding speed and the rotating speed for drills locates at the boundary position between Stage II and Stage III, where the coring rate saturates and the weight on the bit and the driving torque are still low. Further data analysis of the ground experiments reveals that the optimum matching signifies a proportional relation between the maximum conveying rate (MCR) by the groove of the auger and its rotating speed. The kinetic analysis in an ideal condition without gravity, the friction from the auger groove and the pressure at the bit confirm a similar proportion. The correlation between the proportions needs further study to determine whether the optimum matching obtained on the ground can be directly applied to future drills on the Moon.     

亚跨超CFD软件平台研制

亚跨ＣＦＤ软件平台研制的宗旨是综合国内外计算流体动力学的最新研究成果，用计算机软件技术的新发展，建立一个面向对象的计算流体动力学的研究开发环境，加快计算流体动力学最新成果向工程应用的转换速度。本文介绍初级版本的研究进展和研究成果，主要匝数值网格生成技术，流场解算器，面向对象的界面设计等三部分组成。     

一种计算二维图象矩的神经网络方法

提出一种计算二维图象矩的神经网络方法，首先，导出一维信号矩与一维Ｈａｄａｍａｒｄ变换之间的关系。通过２Ｎ－一维Ｈａｄａｍａｒｄ变换和极少量加法，移位及乘法运行可计算二维图象矩。然后给出用Ｔａｎｋ－Ｈｏｐｆｉｅｌｄ神经网络实现Ｈａｄａｍａｒｄ变换的方法，并对该网络作了改进。     

CAD技术及其在卫星工程中的应用

CAD 技术作为一种高效率、高质量、高精度的设计技术,正在包括航天技术在内的多个领域中广泛应用,发挥其效益。尤其是在机械(MCAD)与电子(ECAD)两方面的应用,更是令人瞩目。本文就CAD 技术的范畸、功能、组成、主要技术等并结合卫星研制的具体应用前景,作一介绍,目的在于推动CAD技术的开展,并为CAD/CAM 一体化做好思想准备。     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

外军电子战无人机发展前景

阐述了电子战无人机在执行电子战任务时的优势和能力,并对电子战无人机进行了分类;分析了电子战无人机机载设备的制约因素;讨论了电子战无人机所面临的技术挑战和发展趋势.     

Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

冲击射流的彩虹纹影实验研究

超声速冲击射流在短距、垂直起降飞行器（S/VTOL）以及火箭发射等方面应用广泛,但是伴随着流场与噪声等诸多方面的问题。要研究这一类问题,必先研究这一类超声速流动的波系结构。文章利用彩虹纹影测量系统,对不同距离不同压比的冲击射流进行实验研究,得到了清晰的彩虹纹影实验结果,细致地呈现了冲击射流的波系结构。基于实验结果,对三种不同结构的冲击射流的波系结构进行了详细分析。发现喷嘴与挡板距离较大时,形成的射流结构与自由射流相似,壁面附近的射流区域不明显。随着距离减小,冲击射流出现壁面冲击区附近射流比较剧烈的现象。距离进一步减小时,出现滞止泡等结构,滞止泡的形状与压比相关。此外,实验表明冲击射流形成的马赫盘大小、形状与来流压比相关。     

超燃冲压发动机燃烧室空气节流技术研究

为考察空气节流对超燃冲压发动机燃烧室的影响,非定常数值模拟和地面实验相结合证实了空气节流可以实现超燃燃烧室燃料稳定燃烧,研究了节流位置、节流流量、节流撤去时间对节流效果的影响。结果表明:在燃烧室入口马赫数2,静温548.8K,静压101555.9Pa条件下,745mm处节流时,激波串稳定时间较短,稳焰失败;875mm处节流时,火焰稳定成功。随着节流流量和节流撤去时间的增加,燃烧越来越剧烈,壁面压力逐渐升高,可能影响进气道的起动,对于本文来流条件,30%入口空气流量作为节流流量是合适的,440ms以前撤去空气节流是恰当的。