基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

扭叶片型面在线检测的研究

以汽轮机700mm扭叶片为对象,在XK5040数控机床上,进行了型面误差在线检测的研究。     

齿轮测量中心测头数据采集系统

提出了齿轮测量中心电感测头的新型数据采集系统,包括以集成开关构成的新型相敏检波器和以单片机为核心的数据采集系统,可以应用于各种电感信号的处理,具有较强的通用性。     

Zonal mean temperature, pressure, zonal wind and geopotential height as functions of latitude

The new zonal mean COSPAR International Reference Atmosphere (CIRA-86) of temperature, zonal wind, and geopotential/geometric height is presented. This data can be used as a function of altitude or pressure and has nearly pole-to-pole coverage (80°S-80°N) extending from the ground to approximately 120 km. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As shown by a series of cross sectional plots, the new CIRA accurately reproduces most of the characteristic features of the atmosphere such as the equatorial wind and the general structure of the tropopause, stratopause, and mesopause.     

GPS定位数据在海洋一号卫星中的应用与比较

简要介绍了海洋一号卫星星载GPS接收机的定位原理、流程和应用，探讨了一种在轨定位结果的确认和互验方法．借助于卫星工具包软件(STK)，利用NASA网站公布的HY-1卫星两行根数(TLE)进行卫星轨道推算，生成星下点位置，并与相应时刻星载GPS接收机实测数据得到的星下点位置进行比较，由此得到两种方法定位结果之间的偏差，用实际在轨数据验证了两者的位置符合程度．     

空间飞行体远尾区内场和密度的非稳态非线性计算

对空间飞行体远尾区内等离子体与场之间非稳态非线性相互作用的耦合方程，在考虑了时间导数项后，进行了数值模拟计算．计算中考虑到场量具有轴对称的特点，利用二维三分量的初始条件，采用FTCS有限差分格式方法，得到了场和密度扰动的分布．结果表明，这种非线性相互作用也会引起场的塌缩并出现密度空洞，但塌缩的速度较快．通过对密度空洞变化的探测，可以对隐身飞行体进行跟踪探测．     

软件可靠性预计方法研究及实现

软件可靠性评估可以估计和预计软件可靠性水平.为了解决软件可靠性预计过程中存在的问题,提出了一种软件可靠性预计方法.该方法通过分析和改进模型的预计质量来选择模型进行预计,对模型预计质量的分析使用了U图、Y图和对数PLR图,再标定法和组合法被用于改进模型的预计质量.在该方法的基础上开发了软件可靠性分析工具,此工具可以进行多种软件可靠性模型的原始预计、预计质量分析和改进原始模型的预计质量.     

Advances in the Studies of the Middle and Upper Atmosphere in 2004 - 2006

This paper summarizes the research results obtained by Chinese scientists and/or through international collaborations during 2004 to 2006. Within the context of COSPAR, the progresses in the studies of the middle and upper atmosphere in China in the past two years are introduced with focusing the developments in facilities and instruments, and the advancements in scientific issues, e.g., dynamics related processes, atmospheric constituents, and the coupling with the lower atmosphere.     

空间光学遥感器主镜背部形状的选择

本文阐述了空间光学遥感器中主镜轻量化的必要性．对双凹、平背、单拱和双拱4种形状主镜在重力载荷下的变形进行了分析计算，得出了背部3点支撑方式下双凹主镜最优的结论，并进一步研究了3点支撑的双凹主镜面形变化RMS值随规一化支撑半径r／R的变化规律．